ID: 1849

Description77m Multi-Purpose Offshore Work Barge Accommodation Barge pipe Laying Capacity
Date Launched
2006
Length77m (252ft)
Beam26m (85ft 3in)
Draft3.4m (11ft)
NoteCummins Engine
LocationNigeria
BrokerReynaldo Gil
PricePOA

Class: Bureau Veritas. Flag: Nigerian. Accommodation: 184 Berths. Deck Crane: Crawler Crane. Line Pull: 77 tonnes. Potable Water: 470 tonnes. Fresh Water: 1080 tonnes. Ballast Water: 1240 tonnes. Fuel Oil: 288 tonnes. Dry Cargo Under-deck: 1850 cu meters. Clear Deck Space: 1000 cu meters. Helideck.

28m Shallow Draft Workboat for Sale

Dampier Australia
ID: 1128561


US $1.3 million

Full Details

ID: 1128561

Description28m Multipurpose Workboat
Date Launched
December 2012
Length28m (91ft 10in)
Beam11m (36ft)
Draft2.275m (7ft 5in)
LocationDampier Australia
BrokerPeter Cookson
PriceUS $1.3 million

This 28m Workboat is designed for inland, harbor and coastal operation such as towing, pushing, anchor handling, hoisting, transport of heavy deck load, dredge supply and assistance. Classed ABS+A1 (E) Towing vessel + AMS. Total deck space 110m2. Main Engines 2 x Caterpillar 3412C DITA 720 bhp@1800 rpm. Free Run Speed Approx.: 10 knots. Bollard Pull: 18 tons . 2 x Anchor Windlass . 2 x Crane: Towing Hook: Towing Hook 30 ton WLL with hydraulic emergency release. Towing Winch . Towing Wire. A-Frame/Rollers: Class Approved Anchor Handling A-Frame. Rollers: Bow & Stern Rollers Fitted

ID: 4515

Description14.75m Workboat For Sale
Date Launched
1989
Length14.75m (48ft 4in)
Beam4m (13ft 1in)
Draft0.50m (1ft 7in)
Note2 x Volvo Penta Engine
LocationEurope
PriceEuro 94,000

The ship has been out of service since 2021. The aim was to convert the ship so that it could be used for private purposes. As a result, the deck layout has changed a bit. This also means that all the radio equipment required for commercial use is no longer on the ship. Vessel is now on dry dock / winterized. Sea trials are possible but prior notice is required. Former survey boat, converted for private use. As part of the conversion work, the seating area was renewed and survey equipment removed. A working toilet, as well as a sink and a small kitchenette are available. It is also possible to spend the night on the boat. Hull Material: Glass Fiber. Main Engine: 2 x Volvo Penta TAND 71 A.

NEW BUILD - 10m Aluminium Catamaran Work Boat - Kitset

Australia
ID: 1854


from AUD 165,000 FOB inc elec. design.

Full Details

ID: 1854

DescriptionNEW BUILD - 10m Aluminium Catamaran Work Boat
Date Launched
Built to Order
Length10m (32ft 9in)
Beam4.1m (13ft 5in)
Draft0.6m (1ft 11in)
LocationAustralia
BrokerGeoff Fraser
Pricefrom AUD 165,000 FOB inc elec. design.
Price NotesThis is offered as a Kit-set only for retail buyers or builders. We may also be able to find a builder.

This is offered as a Kit-set only for retail buyers or builders. We may also be able to find a builder. Versatile Aluminium Catamaran Workboat. Passengers: 12. Crew: 1-2. Power Range: 2x 450 – 2x 550 hp. Survey: NSCV 2C. Can easily be modified to suit a wide range of uses.

ID: 4505

DescriptionRibcraft 12.5 Pro
Date Launched
Built to Order
Length12.5m (41ft)
Beam3.5m (11ft 5in)
NoteTwin 8LV 320hp inboard
LocationAustralia
BrokerRichard Pierrepont
PricePOA

The Flagship of the Ribcraft range, the 12.5 delivers the ultimate offshore response. By combining Ribcraft’s signature deep V hull and bow sheer with an extended waterline and generous beam, the 12.5m RIB makes easy work of virtually any sea condition. Designed for extended passages and operations requiring large payload capacities, the 12.5 offers incredible design flexibility. From a simple center console for optimal work space to multiple seating arrangements for crew and passenger transport to cabin arrangements for all weather protection or overnight accommodations, this flagship model answers the need for virtually any application.

ID: 4351

Description11.03m Fast Small Boat For Sale & Charter
Date Launched
2020
Length11.03m (36ft 2in)
Beam3.15m (10ft 4in)
Draft0.85m (2ft 9in)
Note2x Outboard engines
LocationUK
PriceEUR 250,000

Excellent high-speed cornering due to the superb Gemini Waverider X-class hull and great acceleration thanks to the powerful 2x 300 hp outboard engines. Vessel fitted with the latest equipment available in the market.

NEW BUILD - 16.45m Workboat

ex Shipyard, NSW, Australia
ID: 424059


ID: 424059

DescriptionNEW BUILD - 16m Workboat
Date Launched
Built to Order
Length16.45m
Beam8.10m
Draft1.10m approx.
Locationex Shipyard, NSW, Australia
BrokerIvan Colaco

Survey: 2C / 2D. Main Engine: 2 x Volvo TAMD122A 400BHP @ 1900 RPM. Gearboxes: 2 x Twin Disc MG514 / std ratios of 5.16:1 Fuel: 2 x 7250 litres. Propellers: 2 x 5BL Kaplan type approx 1100mm Ø. Generator: 1 x 100kVa genset. Deck Winch: 30 Tonne central deck winch. Deck Cranes: 4.6 Tonne Palfinger.

ID: 4368

Description9.25 m Multipirpose Work Boat For Sale
Date Launched
2022
Length9.25m (30ft 4in)
Beam3.41m (11ft 2in)
Draft1.1m (3ft 7in)
Note1x Deuts Ventus Engine
LocationTurkey
BrokerGeorgi Savchev
PriceEuro 125,000

The boat is very robustly built to cope with the rigors of work boat operations and is fitted with powerful engine. The wheelhouse is fully enclosed and contains the main console and navigation and communication equipment, chart table. She is flying Georgian flag.

NEW BUILD - 10m Landing Craft with Enclosed Wheelhouse

Italy
ID: 3087


As a guide only 155,000 Euros with a 250hp single diesel

Full Details

ID: 3087

DescriptionNEW BUILD - 10m Landing Craft with Enclosed Wheelhouse
Date Launched
Built to Order
Length9.96m (32ft 8in)
Beam3m (9ft 10in)
Draft0.76m (2ft 5in)
LocationItaly
BrokerGiuseppe Filippone
PriceAs a guide only 155,000 Euros with a 250hp single diesel

This Landing Craft has been designed for serious work in demanding conditions. Class / Survey: RINA / BV. CE Category: B / C. Passengers: 10. Crew: 2. Deadweight: 2900 Kg. Service speed @ standard power: 18 knots. Max speed @ standard power: 22 knots. Main Engines: single 250hp diesel or twin 140 hp diesels. The structure is of marine grade aluminium All materials have RINa / DNV certification. While the hull’s dimensions and structure are standard, many other features of the boat can be configured as per owner’s requirements. This includes deck layout, wheelhouse dimensions, engine type and power, tankage and deck equipment. The standard layout includes several high capacity storage options : 2 forward seat lockers with waterproof lids, 1 cabin seat locker and 2 dive bottles lockers (with a capacity of 6 50 lt. Bottles). 2 side doors (700 mm. wide) are located aft of the forward seats. They can be of the “flip down” or “lift out” type or hinged. The boat can be equipped with a small crane installed on a reinforced base. Push-knees (optional) are designed and built as per owner requirements to address specific work conditions. The standard walkaround wheelhouse is large and comfortable. It is designed to offer good protection to two or three crew members even in bad weather conditions for long work periods.

ID: 4065

DescriptionNEW BUILD - 5.8m Tourist Boat
Date Launched
Built to Order
Length5.8m (19ft)
Beam2.5m (8ft 2in)
Draft0.25m (9in)
PricePOA
Price NotesThis is offered as a Kit-set only for retail buyers or builders. We may also be able to find a builder.

This is offered as a Kit-set only for retail buyers or builders. We may also be able to find a builder. Small Tourist Boat with glass bottom for viewing. Power Required: 1x 25 HP. Passengers: 12, Crew: 1. Survey: NSCV 2E.

ID: 4199

Description30' SeaArk Marine for Charter Only
Date Launched
1996
Length9.14m (30ft)
Beam3.18m (10ft 5in)
Draft0.74m (2ft 5in)
Note2x Suzuki 115HP Outboard Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. Endurance is primarily used for our containment boom operations and as a sunken boat recovery platform. Due to the vessel's large cargo area, we are able to transport, deploy and recover over 1,800 feet of Containment Boom. Her hydraulic A-Frame and dewatering pumps are very useful for salvage work, complementing our large inventory of lift bags and gas powered dewatering pumps. The vessel is available for hourly and daily charter for use as a work platform for a wide variety of projects.

ID: 1488

DescriptionNEW BUILD - 14m Multi-purpose Launch
Date Launched
Built to Order
Length14m (45ft 11in)
Locationex shipyard, Hongkong
BrokerJohn Kearns

NEW BUILD 14m Multi-Purpose Launch built to BV Class available with short lead time ex yard Hong Kong.  Powered by twin Caterpillar C9.3 Marine diesel engines developing 416 BHP @ 2100 RPM, driving ZF W325 gearboxes with 4.409;1 reduction to two FFP in Korts nozzles and producing 10 TBP. Caterpillar C1.5 generator producing 11ekW 220V,single phase, 50Hz. Fuel capacity 5.1m3, Water 0.5m3.

ID: 4198

Description28' SeaArk for Charter Only
Date Launched
2001
Length8.38m (27ft 6in)
Beam3.2m (10ft 6in)
Draft0.91m (3ft)
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #8 was added to our fast response fleet in 2015. Prior to its acquisition, the vessel was owned and operated by the Chicago Police department. After the vessel was purchased and transported to South Florida, she underwent a complete refit including repowering and many other unique customizations to suit our needs before she was launched into service. The vessel is equipped with a full complement of salvage equipment and is primarily used to respond to salvage and emergency towing situations.

ID: 4197

Description28' SeaArk for Charter Only
Date Launched
2001
Length8.38m ( 27ft 6in)
Beam3.2m (10ft 6in)
Draft0.91m (3ft)
Note2x Suzuki Outboard Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #4 was added to our fast response fleet in 2014. Prior to its acquisition, the vessel was owned and operated by the Chicago Police department. After the vessel was purchased and transported to South Florida, she underwent a complete refit including repowering and many other unique customizations to suit our needs before she was launched into service. The vessel is equipped with a full complement of salvage equipment and is primarily used to respond to salvage and emergency towing situations.

ID: 4196

Description29' Ambar for Charter Only
Date Launched
2001
Length8.97m (29ft)
Beam3.15m (10ft 4in)
Draft0.91m (3ft)
Note2x Suzuki Outboard Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #3 is an aluminum hulled hybrid RHIB that was added to our fleet in 2008. Prior to its acquisition, the vessel served as one of Coast Guard Station Ft. Lauderdale's fast response search and rescue boats. The vessel underwent a complete refit including repowering and many other unique customizations to suit our needs before she was launched into service in August 2008. The vessel is equipped with a full complement of salvage equipment and is primarily used to respond to salvage and emergency towing situations.

ID: 4195

Description30' SeaArk Marine for Charter Only
Date Launched
1996
Length9.14m (30ft)
Beam3.18m (10ft 5in)
Draft0.74m (2ft 5in)
Note2x Johnson 115HP Outboard Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

The SeaArk Barge is primarily used for our containment boom operations. Due to the The vessel's large cargo area, we are able to transport, deploy and recover over 1,800 feet of Containment Boom. Please click here for a copy of her survey. The vessel is available for hourly and daily charter for use as a work platform for a wide variety of projects.

ID: 4194

Description25' Dusky for Charter only
Date Launched
1977
Length7.62m (25ft)
Beam3.48m (11ft 5in)
Draft1.57m (5in 2ft)
Note2x John Deere Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #9 is a 25' Dusky that underwent a complete refit. Her stringers, running gear, bulkheads and deck were all redesigned to accommodate keel cooled twin John Deere diesel engines. She is specifically designed to assist large yachts.

ID: 4193

Description31' Custom JC for Charter Only
Date Launched
2000
Length9.45m (31ft)
Beam3.66m (12ft)
Draft0.91m (3ft)
Note2x John Deere Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #5 is one of our primary tow boats. The vessel is equipped with a full complement of salvage equipment and is primarily used for towing, and situations where more horsepower is needed.

ID: 4192

Description31' Custom JC for Charter Only
Date Launched
2000
Length9.45m (31ft)
Beam3.66m (12ft)
Draft0.91m (3ft)
Note2x John Deere Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #1 is one of our primary tow boats. The vessel is equipped with a full complement of salvage equipment and is primarily used for towing, and situations where more horsepower is needed.

ID: 4186

Description31' Custom JC for Charter Only
Date Launched
1999
Length9.45m (31ft)
Beam3.66m (12ft)
Draft0.91m (3ft)
Note2x John Deere Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

TowBoatU.S. #6 is one of our primary tow boats. The vessel is equipped with a full complement of salvage equipment and is primarily used for towing, and situations where more horsepower is needed.

ID: 4185

Description55' R.E. Derecktor for Charter Only
Date Launched
1977
Length17.78m (58ft 4in)
Beam5.11m (16ft 9in)
Draft1.57m (5ft 2in)
Note2 xDetroit Engines
LocationFlorida, USA
BrokerReynaldo Gil
PricePOA

Aluminum. Work Deck Dimensions: 9ft x 14ft. Cargo Capacity: 2 long tons. Range: 400 NM @ 10 knots cruise speed. 6 passengers, Berthing for 4 passengers. AC. 2 Detroit Diesel 12V71TI 540 HP each. Crane. A compliment salvage and dive equipment available upon request.

ID: 3864

Description7m Pollution Control Vessel For Sale
Date Launched
2021
Length7m (22ft 11in)
Beam2.50m (8ft 2in)
Draft0.8m (2ft 7in)
LocationNorth West Spain
Price78,000 EUR

Total power output: 200 bhp. Speed cruising: 15 knots. CE Certificate issued by the Builders. It could be delivered with Spanish trading certificates as Workboat for Harbour duties. Reported to be in full operational condition and with only 10 hours of use (sea trials). Fuel LPG / Gasoline. Capacity of the Tank Waste 0.5- 2.5 m3. Cleaning boat specially designed for water slides in marinas or docks. Collection of waste from the bow with baskets. 4 meter sweep width. 800 kg load capacity. 2 Bow locker. 2 solar panels.

ID: 1217

Description14.4m Work Boat For Charter
Date Launched
2003
Length14.4m (47ft 2in)
Beam4.35m (14ft 3in)
Draft1.36m (4ft 5in)
LocationWest Africa
BrokerRichard Pierrepont

Built: 2003, The Netherlands. Hull material Steel. Flag: Togo. Class Society and Notation: BV Coastal. Total power output: 240 bhp. Main Engine: 2 x Caterpillar 3304B T/A Hand. Main Propulsion System: Twin screw. Speed maximum: 10 knots. Fully overhauled by Damen in 2014 Very low running hours. Transport cradle included (also from DAMEN). Airconditioned wheelhouse, 10 passengers and sanitary facilities.

ID: 1378

DescriptionMultipurpose workboats
Date Launched
Built to Order
Length from 4.00 to 6.00 m
Beam from 2.0 to 2.4m
Draft0.2m
Locationex factory (Turkey)
BrokerGiuseppe Filippone
PricePOA
Price NotesDelivery 3 - 4 weeks depending on the model.

Sea VIZion Series is a family of small workboats, specifically designed to offer safety, functionality and durability even in extreme working conditions. The Sea Vizion W Series is characterized by the rectangular hull shape. This provides maximum lift force and decreases the draft of the boat, makeing these boats ideal for shallow waters while also ensuring great stability and maximum storage area. The edges of the hull has been made by bending technique which provides fuel efficiency and structural integrity. They are available in 3 sizes: SEA VIZION W600, Length Overall 6.00 m. SEA VIZION W500, Length Overall 5.00 m. SEA VIZION W400, Length Overall 4.00 m. Sea VIZion boats are built to work in the most extreme weather and temperature conditions. The whole family is literally unsinkable, with collar tubes that thanks to HDPE construction will last forever. These boats will accompany you in your most difficult tasks on the seas around the globe.

ID: 1360

DescriptionNEW BUILD - 6.85m Multipurpose workboats
Date Launched
Built to order
Lengthfrom 4.85m to 6.85m
Beamfrom 2.0 to 2.4m
Draft0.4m
Locationex factory (Turkey)
BrokerGiuseppe Filippone
PricePOA

Sea VIZion Series is a family of small workboats, specifically designed to offer safety, functionality and durability even in extreme working conditions. Common features include deep V hull shape for maximum stability, non-slip deck, double bottom hull and 5 watertight sections of tubes filled with polystyrene foam for safety. They offer huge deck area, a lot of space and storage, elevated foredeck and push-up bow for functionality. Construction is UV resistant HDPE 100 sheets from Röchling®, state of art hand welding and structurally integrated all-around fenders for durability. They are available in 3 sizes: SEA VIZION R685 - Length Overall 6.85 m; SEA VIZION R585 - Length Overall 5.85 m; SEA VIZION R485 - Length Overall 4.85 m.

ID: 3532

Description8.53m Boat for Bathroom Water Cleaning
Date Launched
1999
Length8.53m (27ft 11in)
Beam2.40m (7ft 10in)
Draft1.7m (5ft 6in)
LocationSpain
BrokerReynaldo Gil
Price€ 64.800

QUITANATAS model - BRAND KVICHAK 28. Year: 1999 based in Andalusia. Flag: Spain. Aluminum. Engines Mercruiser 137 hp gasoline. Passengers: 8. Cruising speed: 10 knots. Maximum speed: 19 knots. Storage capacity 1.8m3 1200 Kg. In solids. Working speed 1.5 knots. CLEANING CAPACITY: Area collected per hour of liquids 6,500 m2, Area collected per hour of solids 17,500 m2.

ID: 3472

Description23.35m Shoalbuster For Charter
Date Launched
2006
Length23.35m (76ft 7in)
Beam8.64m (28ft 4in)
Draft2.40m (7ft 10in)
LocationUK
BrokerRichard Pierrepont

Built: 2006, The Netherlands. Steel. Flag: The Netherlands. Class Society and Notation: BV Tug Unrestric. Nav. Next DD: April 2021, Next SS: April 2021. Total power output: 1720 bhp. Main Engines: 2 x Caterpillar 3412 D. 2 x Promarin fixed pitch propellors. Speed maximum: 10.5 knots. Both main engines completely overhauled in July 2018 at 30790 hours, after this the counter was reset. Hours: PS ME: 5357 - SB ME: 5363, C9 (Hydraulic unit) 20191. Bollard pull: 22 ton (m). Moonpool: Build in bow for clear view with echosounder 600 x 400mm. Anchor handling winch: Ridderinkhof, 30 ton @ 6 m/min. Deck crane: HS Marine 80 T/m 4SL , 4.4 ton @ 15,5 m. Towing winch: Ridderinkhof , 30 ton @ 6 m/min. Maximum deckload: 10 ton/ m2. A-Frame : 25 ton SWL A-frame. Container capacity : 2x 20”. Heated and aircondioned living spaces for five persons, consisting of a captain’s cabin , a C.E. cabin ,one single crew cabins, one double crew cabin, a galley and sanitary facilities.

ID: 3462

Description8m Mooring Boat
Date Launched
2000
Length8m (26ft 2in)
Beam2.9m (9ft 6in)
LocationSpain
BrokerRichard Pierrepont
Price50,000 EUR

Built: 2000, Spain. Fiber Glass. Flag: Spain. Class Society and Notation: Local Spanish Harbour waters. Next DD: February 2022, Next SS: February 2024, Next Annual Survey: February 2021. Total power output: 153 bhp. 1 x Volvo Penta TAMD 41 HD. Single screw. Speed cruising: 7 knots. Free deck space 5 m2. Maximum number of people on board: 3.

NEW BUILD - 10 Multipurpose Power Cat

Italy, delivered anywhere
ID: 3423


ID: 3423

DescriptionNEW BUILD - 10 Multipurpose Power Cat
Date Launched
Built to Order
Length11.17m (36ft 7in)
Beam5.56m (18ft 2in)
Draft 0.55m (1ft 9in)
LocationItaly, delivered anywhere
BrokerGiuseppe  Filippone
PriceP.O.A.

The SEABUS are multi-role high-performance catamarans designed for a wide range of marine activities including day charter, harbour operations, freight transport, oceanographic researches, water sampling campaigns, environmental/disasters protection, fishing activities etc. These vessels are built in Italy by SMC ITALIA, a company with a long history in the production of composite materials for the automotive, aerospace and marine industries. Their production includes several different models up to 20mt length, that SeaBoats can now offer to their international clients. The smallest of the series is SEABUS SB-330 is a multi-purpose catamaran for coastal navigation. It is specially designed for passengers but can also carry cargo or be equipped with crane, hoists, firefighting systems in order to support harbour activities.

NEW BUILD - 10.3m Multi-Purpose Cat Landing Craft

Europe or Canada (and delivered anywhere)
ID: 3385


ID: 3385

DescriptionMulti-Purpose Cat Landing Craft
Date Launched
Built to Order
Length10.3m (33ft 9in)
Beam3.5m (11ft 5in)
Draft0.45m (hull)
LocationEurope or Canada (and delivered anywhere)
BrokerGiuseppe Filippone
PricePOA

Designed by the renowned designer Rick Welin (Canada) this very versatile workboat can handle serious loads for her size. Whether you need a Landing Craft, Dive Boat, Recovery Platform, Fish-Farm Tender, Portable Work Platform, Crew Boat, or ALL of the above, she can handle the job. This is a "Do Anything" coastal worker, and she's trailerable. Designed to Lloyd's Registry Small Craft Scantlings rules for workboats she'll pass muster in any workboat category. The through-deck Moon-Pool allows her to hover above underwater loads for lifting at her center of flotation which allows a lifting capacity beyond that of any deck-mounted Hiab type of configuration. (NOTE: She can be built without the moon-pool as well). Other cabin sizes and configurations can be created as modifications to suit the owner needs. You may need an open deck with center console, or a small hardtop for instance. Or a larger cabin for crew-boat or water-taxi type of operations. 6mm bottom plating with beaching plates means never having to worry about landing on gravel shorelines, and her twin hulls mean you can ground her on any tidal flat and she'll sit level to provide versatility. Catamaran hulls lend themselves to beached stability beyond any mono-hull Landing Craft. Outboard power allows for a range of powering options depending on budget or speed requirements and affords the busy commercial operator the ability to upgrade or re-power at any time without significant downtime.

ID: 1404

DescriptionNEW BUILD – 11 mt Foil-Assisted Power Cat
Date Launched
Built to Order
Length10.9m (35ft 8in)
Beam 3.70m (12ft 1in)
Draft0.53m (1ft 7in)
Location Europe
BrokerGiuseppe Filippone

This is a semi-asymmetrical, foil assisted catamaran  designed to offer economical cruising speeds of 24 -26 knots with twin 300hp outboards with up to 24 passengers on board. Designed by Noah Thompson (NZ), the boat is available in a variety of layouts to better address the needs of dive and tour operators. Foil-assistance permits a higher level of comfort and lower fuel consumption.   The NXT 35 SP is slightly bigger than the 35 DC but has similar characteristics : seaworthy hull, huge cockpit area, economy of operation and maintenance free construction. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 SP is characterized by excellent performance and good load carrying capacity. She is ideally suited for  the Mediterranean or tropical climates with open or enclosed sides, drop down clear screens and a layout fully customizable. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements.  The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.

NEW BUILD - Defender 22

ex shipyard, Canada
ID: 3243


ID: 3243

DescriptionNEW BUILD - Defender 22
Date Launched
Built To Order
Length6.7m (22ft)
Locationex shipyard, Canada
BrokerGeoff Fraseer
PricePOA

The Defender 22 is a lot of boat crammed into a 22ft package. With its brand new, innovative, and fully insulated walk-through cabin design, it’s perfectly suited for a wide range of uses. Whether it be fishing, weekend camping adventures, day trips, or cabin commuting, this is the boat for you. With its 8’6” beam, its extremely stable, roomy, and trailer-able. With ease of access to the bow, it’s great for gear storage and access to beaches. Its roomy aft cockpit is an excellent zone for fishing or any other activities. The insulated cabin, with efficient heating and cooling, ensures comfort in any climate. We are very proud to introduce this extremely practical, versatile, and stylish new model. Custom options are endless, from side doors, transom doors, bait wells, or even a longer version of the boat to suit your custom needs. All inquiries are welcome!

ID: 3222

Description16.43m Workboat For Sale & Charter
Date Launched
1984
Length16.43m (53ft 10in)
Beam4.06m (13ft 3in)
Draft1.50m (4ft 11in)
LocationEast Med
BrokerRichard Pierrepont

Built: 1984, Italy. Flag: Lebanon. Class Society and Notation: IRS ISE RC Tugboat. Total power output: 280 bhp. 1 x Fiat AIFO-828 M. Last DD: February 2020. Class new: 2020. Reconditioned Lebanon: 2014.

NEW BUILD - 9mDiving/ Fast Transfer / Power Cat

Europe
ID: 3110


EUR 70,000 (excluding engines)

Full Details

ID: 3110

DescriptionNEW BUILD – 9m Diving/ Fast Transfer / Power Cat
Date Launched
Built to Order (delivery 4 months from order)
Length9m (29ft 6in)
Beam3m (9ft 10in)
Draft0.5m (1ft 7in)
LocationEurope
BrokerGiuseppe Filippone
PriceEUR 70,000 (excluding engines)

Characterized by a seaworthy hull, huge cockpit area, economy of operation and maintenance free construction, the boat is designed and built to address the needs of commercial operators or pleasure boaters who want a fast and very tough small catamaran, suitable for serious work even in difficult conditions. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters, the NXT 29 CC is characterized by excellent performance and good load carrying capacity. She is ideally suited for the Mediterranean or tropical climates with drop down clear screens and the layout can be customized to suit your operation.

ID: 1364

DescriptionLavamposto 800
Date Launched
Built to Order
Length8.0m (26ft 2in)
Beam2.95m (9ft 8in)
Draft0.45m (hull) (1ft 5in)
Locationex factory (Italy)
BrokerGiuseppe Filippone
PriceP.O.A.

LAVAMPOSTO 800 is a tough, aluminum boat suitable for a variety of demanding applications. With a deep dead rise and reverse chine, this 8 Mt handles chop exceptionally well and can be configured in a variety of layouts to suit different uses : fishing/expedition boat, charter boat, research vessel, dive boat, rescue vessel or patrol boat. Every LAVAMPOSTO 800 is custom built and fully outfitted with all the necessary features and specifications that are exactly right for the duties it will be expected to perform.

ID: 2258

Description19.20m Workboat For Sale
Date Launched
1993
Length19.20m (62ft 11in)
Beam5.20m (17ft)
LocationNorway
Price230,000 EUR

Built: 1993, Norway. Hull material: Aluminum. Flag: Norway. Class Society and Notation: Local Class 5 NM offshore. Next DD: March 2022. Next SS: March 2022. Main Engine: 2 x M.T.U. 12V 183 TE 72. Twin screw. Speed cruising: 25 knots. Last dry dock March 2019. The vessel was put into overturning main engines in 2008, as well as a new auxiliary engine. The vessel has had continuous follow-up on maintenance and electrical system. The vessel was extended in 2017 and had a 5 t / m crane stab mounted. A large room has been created in the hull extension for storing diving hoses, roving cables, ROV etc.

ID: 1687

Description14.39m Work Boat For Charter
Date Launched
1986
Length14.39m (47ft 2in)
Beam4.17m (13ft 8in)
Draft2.17m (7ft 1in)
LocationEurope
BrokerRichard Pierrepont

Flag: United Kingdom. Class Society and Notation: UK Cat 2 Workboat. Total power output: 430 bhp. 1 x Caterpillar 3406. Single screw. Robust & Versatile Category 2 Workboat. Road Transportable (by prior arrangement). Deck Cargo: 1 ton. Quick release towing hook.

ID: 1124558

Description28m 1500bhp Shallow Draft Workboat (OVID Compliant)
Date Launched
2012
Length28m (91ft 10in)
Beam11m (36ft)
Draft2.275m (7ft 5in)
LocationQueensland, Australia
BrokerGeoff Fraser
PricePOA

Classification: ABS +A1 (E), Towing Vessel, +AMS. Total Deck Space: Approx. 10 knots Bollard Pull: 19 tons. Main Engine: 2 x Caterpillar C32 ACERT – 750bhp @ 1800rpm Propeller: 2 x Fixed Pitch 4 Blade (1400mm) with Kort Nozzles. Accommodation: 1 x 1 man (Captain); 1 x 2 men;  2 x 4 men.

ID: 1592

DescriptionNEW BUILD - 7.65m Dive Boat
Date Launched
Built to Order
Length7.56m (24ft 9in)
Beam2.94m (9ft 7in)
Draft0.54m (1ft 9in)
Locationex factory, Thailand
BrokerGeoff Fraser
Pricefrom USD 29,000 for Hull only

HIGH BUOYANCY, SUPERIOR TENSILE STRENGTH, SHOCK ABSORBANT, HIGH GRADE HDPE, HIGH FREEBOARD AND NUMEROUS HANDHOLDS, LIGHT WEIGHT, SPECIFICALLY DESIGNED FOR DIVE PURPOSES.

NEW BUILD - Multipurpose Pontoons

ex factory, Spain
ID: 1575


from EUR 15,200

Full Details

ID: 1575

DescriptionMultipurpose Pontoons
Date Launched
Built to Order
LengthMt 5.0 (Moggaro 500) & Mt 6.0 (Moggaro 600) models
Beam2.60m / 2.98m
DraftMt. 0.20 (hull)
Locationex factory, Spain
BrokerGiuseppe Filippone
Pricefrom EUR 15,200

It is with a great  deal of pleasure that we announce that SeaBoats can now offer the full range of aluminum boats produced in Spain by Moggaro Aluminium Yachts. With more than 15 years in activity , Moggaro has designed and built aluminum boats for customers coming from over 30 countries and 4 continents. The design portfolio includes jet-boats, dive-boats, interceptors, passenger-boats, pleasure boats and workboats of various types. Moggaro 500 and Moggaro 600 are multipurpose pontoons built in aluminium to very high standards and specifically designed for tourist services where small dimensions and/or low capital investment are required. Moggaro aluminium Pontoons are boats of great stability that are characterized by maximum comfort and a variety of designs and styles. As if it were a living space in a house or hotel, you can distribute, decorate and adapt its uses thanks to the modular, simple and economical design.  With these boats the visitor will really feel like he is living in the sea. These pontoons can be shipped anywhere at very reasonable costs in standard containers and once at destination they are easily assembled by two people in a day or two. Models include : Party Pontoon, BBQ Pontoon, Karaoke Pontoon, Family Pontoon. The possibilities of this boat are endless and thanks to the modular assembly system the same Pontoon can be modified in a second time to offer different layouts.

NEW BUILD - 9m LCT

ex factory, Surabaya, Indonesia
ID: 1490


USD 44,500

Full Details

ID: 1490

DescriptionNEW BUILD - 9m LCT
Date Launched
Building period 1.5 months
Length9m (29ft 6in)
Beam2.8m (9ft 2in)
Locationex factory, Surabaya, Indonesia
BrokerFranklin Taylor
PriceUSD 44,500

We offer this 9m aluminium landing craft for those who want simple and cost effective transport opportunities to carry passengers or cargo to secluded locations and beaches.

ID: 1964

Description26.5m Work Boat For Sale & Charter
Date Launched
1992
Length26.5m (86ft 11in)
Beam5.18m (16ft 11in)
Draft1.95m (6ft 4in)
LocationMediterranean
BrokerRichard Pierrepont
Price995,000 EUR

.Built (year and place): 1992 United States of America. Hull Material: Aluminium. Flag: Italy. Class Society and Notation: RINA Coastal Waters. Total Power output: 874 bhp. Main Engine: 2 x Caterpillar 3406. Main Propulsion System: Twin Screw. Speed cruising: 12 knots. Deck Area (m2): 65m2

ID: 1414

DescriptionNEW BUILD - Centurion 26 Fast Dive Support Boat
Date Launched
Built to Order
Length7.92m (26ft)
Beam2.6m (8ft 6in)
Draft0.91m (3ft)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The new Centurion 26 Fast Diving Support boat is our latest high speed boat that is capable of a top speed of 23 knots! The latest design features an outstanding cockpit space to carry all the diving support equipment, compressors and 6 divers. Diving doors are provided at the aft and starboard side together with a diving ladder. The boat is extremely stable at rest with our innovative “Gull- Wing” side floatation sponson. The flat deck with large scuppers ensures that the deck is completely sealed and self-bailing in rough weather conditions.

32.2m Standby Multi-Purpose Vessel

Shoreham-by-Sea, West Sussex, England
ID: 1446


GBP 50,000

Full Details

ID: 1446

Description32.2m Standby Vessel
Date Launched
1956
Length32.2m (105.5ft)
Beam6.5m (21.25ft)
LocationShoreham-by-Sea, West Sussex, England
BrokerRichard Pierrepont
PriceGBP 50,000

Ocean Dawn was built by Richard Ironworks of Lowestoft in 1956. She was built as one of a quartet for Bloomfields of Great Yarmouth. The other three were Ocean Surf YH107, Ocean Crest YH207, and Ocean Trust YH377. While in ownership to Bloomfields in April 1961 OCEAN DAWN was involved in the rescue of six crew from the FRANDOR LT369, after she had caught on fire. She fished out of Yarmouth until 1963, when she was sold to Small & Co. of Lowestoft and registered as LT466.She later became the property of The East Anglian Ice & Cold Storage Company, where she began trawling full time. In 1969 she was sold to John Muir of Cellardyke, and moved to Kirkcaldy and registered KY371. Unfortunately, whilst berthed in Aberdeen Harbour in 1979 she caught her stern under some pilings as the tide rose she took on water and sank. (The crew were in the pub at the time). She was dried out and there was no major damage to her In 1984 OCEAN DAWN finally gave up fishing, when she was sold to the Colne Shipping Co Ltd to be converted into a 100 class stand by vessel. She worked in the southern North Sea, doing 21-day trips with a crew of 6 or 7 and accommodation for 10 (this accommodation is still in place). She was re-named REWGA, and can be seen in the book “Fishing with Diversity”. After being sold in 1987 to a Swedish Co. She reverted back to her old name. OCEAN DAWN had several owners in Sweden until 1997, when a private owner bought her and brought her back to the South coast. The current owners of OCEAN DAWN have converted her to sleep five in three cabins in the old fish hold, which also has a saloon area, shower and toilet. The crew quarters are still the same as when she was fishing, with ten bunks in the aft section below decks. There is a full galley and mess area in the deck house.

ID: 1413

DescriptionNEW BUILD - Centurion 24 General Purpose Workboat
Date Launched
Built to Order
Length7.30m (24ft)
Beam2.5m (8ft 2in)
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

ID: 1412

DescriptionNEW BUILD - Centurion 24 Aluminium Workboat
Date Launched
Built to Order
Length7.43m (24ft 4in)
Beam2.34m (7ft 8in)
Draft0.25m (9in)
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 24 Workboat is a wide body workboat to provide generous working space in a small workboat. The hull is designed for stability for crew during working. This hull is constructed with multiple chambers underneath and foam filled. This boat is capable for carrying 10 crews. It can be powered by single or twin petrol or diesel outboard motors.

ID: 1999

DescriptionCenturion 24 General Purpose Workboat
Date Launched
Ready for delivery now.One in Stock,
Length7.30m (24ft)
Beam2.5m (8ft 2in)
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont
PriceSGD 145,000 / Unit

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

ID: 1996

DescriptionCenturion 26 Fast Dive Support Boat
Date Launched
One in stock, ready for immediate delivery
Length7.92m (26ft)
Beam2.6m (8ft 6in)
Draft0.91m (3ft)
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont
PriceSGD 175,000 / Unit

The near new Centurion 26 Fast Diving Support boat is our latest high speed boat that is capable of a top speed of 23 knots! The latest design features an outstanding cockpit space to carry all the diving support equipment, compressors and 6 divers. Diving doors are provided at the aft and starboard side together with a diving ladder. The boat is extremely stable at rest with our innovative “Gull- Wing” side floatation sponson. The flat deck with large scuppers ensures that the deck is completely sealed and self-bailing in rough weather conditions. Their demo boat in excellent condition.

ID: 1309

DescriptionNEW BUILD - Centurion 24 Aluminium Workboat
Date Launched
Immediate delivery
Length7.43m (24ft 4in)
Beam2.34m (7ft 8in)
Draft0.25m (9in)
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont
PriceSGD 50,000 / Unit without engine, canopy

The Centurion 24 Workboat is a wide body workboat to provide generous working space in a small workboat. The hull is designed for stability for crew during working. This hull is constructed with multiple chambers underneath and foam filled. This boat is capable for carrying 10 crews. It can be powered by single or twin petrol or diesel outboard motors.

ID: 1398

DescriptionNEW BUILD - 11m Diving / Fast Transfer / Power Cat
Date Launched
Built to Order
Length10.8m (35ft 6in)
Beam3.43m (11ft 3in)
Draft0.5m (1ft 6in)
LocationEurope
BrokerGiuseppe Filippone

Characterized by a seaworthy hull, huge cockpit area, economy of operation and maintenance free construction, the boat is designed and built to address the needs of dive and tour operators who want to offer the best to their clients. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 DC is characterized by excellent performance and good load carrying capacity. She is ideally suited for  the Mediterranean or tropical climates with drop down clear screens and the layout can be customized to suit your operation. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements.  The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.

ID: 2065

DescriptionNEW BUILD - Centurion 40 Mooring Workboat
Date Launched
Built to Order
Length12m (30ft 4in)
Beam3.5m (11ft 5in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The centurion 40 an extremely versatile and reliable workboat. Designed and manufactured by FIVE, it can double up as a mooring boat and an oil spill response boat. This workboat has an in built chemical tank for oil spill response & a bollard pull of up till 2000kg. The boat can also be configured into a passenger boat with a spacious cabin for 12 pax & 2 crew.

ID: 2060

DescriptionNEW BUILD - Centurion 20 General Workboat
Date Launched
Built to Order
Length6m (19ft 8in)
Beam2.29m (7ft 6in)
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 20 is a wide body workboat to provide generous working space in a small workboat. The hull is also designed for stability for crew during working. This hull is also constructed with multiple chambers underneath and foam filled to making it virtually unsinkable even when completely flooded.The Centurion 20 is a versatile hull that can be configured for tiller control, centre console control, and will carry 10 crew with ease. It can also be powered by single or twin petrol or diesel outboard motor

ID: 2095

DescriptionNEW BUILD - Scavenger 15 Aquamaster
Date Launched
Built to Order
Length4.5m (15ft)
Beam2.2m (7ft 2in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The sleek and upmarket design and look of the Scavenger 15 makes it an unobstrusive workboat silently working at any worldclass marina or waterside residential areas. It is in operation worldwide in canals, and upscale marinas for the easy cleaning and collection of floating rubbish, seaweeds, plastic bottles etc. Motorised Rotating Stainless Steel Bascule Filter Cage makes clearing floatsam effortless. The rotating basket can pickup 20kg per load and the boat has a total load capacity of 250kg of floatsam. The Scavenger 15 is also easy to maneuver, has low fuel consumption and the strong aluminium hull needs little maintenance. The non marking, ultra light PU foam fender also protects the craft against damages and prevents scuffings to boats at the marina.

ID: 2061

DescriptionNEW BUILD - Centurion 21 Minitug Workboat
Date Launched
Built to Order
Length7.30m (24ft)
Beam2.5m (8ft 2in)
DraftApprox. 0.6m unladen
Note2T Bollard Pull
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

NEW BUILD - 12m Multirole Vessel

ex shipyard, Auckland, NZ
ID: 820375


NZD 560,000 plus GST (if any)

Full Details

ID: 820375

DescriptionNEW BUILD - 12m Multirole Vessel
Date Launched
Built to Order
Length11.6m (38ft)
Beam3.6m (11ft 9in)
Draft0.55m (1ft 9in)
Note13,500Kg (full load)
Locationex shipyard, Auckland, NZ
BrokerGeoff Fraser or John Kearns
PriceNZD 560,000 plus GST (if any)

In the aftermath of the oil spill which resulted from the grounding of the container ship Rena on the Astrolabe Reef in New Zealand’s Bay of Plenty, Auckland Council identified the need to improve Auckland’s own readiness to respond to a similar incident and set about to acquire a new vessel for this purpose. Early in the process it was identified that oil spills are (thankfully) rare events and that it made sense to build a vessel which could perform other tasks in support of operating and maintaining Auckland’s busy harbour. Auckland Council put out a request for proposal to design and build a vessel with multiple requirements: to be capable of servicing the entire Auckland Inshore Limits in a range of weather conditions; to carry and deploy specialist oil recovery and dispersal equipment; to recover debris from the water or to tow stricken vessels away from danger; to carry vehicles to Hauraki Gulf islands; to support Police dive teams; to maintain harbour and Hauraki Gulf infrastructure; to be transported by road to Manukau Harbour and other regional locations. It was to be a simple, easy maintenance vessel with minimal fit out, outboard powered with minimum on-board services, designed to be operated by a diverse mix of crew, sometimes during periods of urgency and high pressure. The result is an extremely robust, well-built vessel, purpose designed in every detail to reflect the input of the customer. With a relatively deep vee hull form and substantial overall displacement, HM5 is a very seaworthy and capable vessel in which the Harbourmaster’s team has confidence to attend any emergency. A manually operated folding bow door provides vehicle access without compromise to the reliable, easy maintenance brief. A high-capacity hydraulic crane, powered by diesel power pack, enables autonomous loading/unloading from other vessels or shore side. A comfortable, fully enclosed wheelhouse provides warmth and shelter to the crew, with a dedicated toilet compartment accessed from the aft deck.

ID: 2196

Description17m General Service Workboat Available for Sale and Charter
Date Launched
2018
Length16.80m (55ft)
Beam4.80m (15ft 8in)
Draft1.43m (4ft 8in)
Locationex shipyard, Turkey
BrokerGiuseppe  Filippone
PriceUSD 1.3m

This new, compact and powerful workboat has been designed by Macduff Ship Design Ltd (Scotland) and is outfitted for a number of harbor duties : towing, berthing, fire-fighting operations.  Classified by BV (Class Notation I, +Hull, *Mach, Launch) this workboat has a bollard pull of 10T. and 12 knots service speed. Complete e very comfortable accommodation for 4 crew members.

ID: 1048

DescriptionNEW BUILD - Watercraft Hybride
Date Launched
Built to Order
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

Material: steel, stainless steel or aluminum. Technical Description: Craft result from the combination between the vessel Harvester and the pick-up vessel , for which features of the cutting tape and collection , of a central belt which transfers the collected material came from the first tape up to the storage bin and an arm charger for the material discharge. Unlike the Pick-up, you can work with a single operator who, once filled the entire storage area, is transferred in the crane cab command to download the material. They can be propelled with screw propellers with antialghe system or with paddle wheels. The draft can be as little as 35-40 cm . Considering the hull distance from the edge to the collection point reached by the arm, the pick-up can also collect material on the banks. There are built in series , therefore it is possible to choose with the client the possible combinations of cutting, collection, storage, unloading, size, etc.

ID: 1047

DescriptionNEW BUILD - Watercraft Draga
Date Launched
Built to Order
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

Natanti acts to ' opening of waterways in swampy areas by means of an excavator arm .  They have a central container , which can be hinged on one side, on which is loaded the dredged material to be discharged onto the ground with operation yield security thanks to  standing places stabilizers aft .  Where required, the container can act as a compactor, or, thanks to a particular mechanism,  squeezes the wet algae for compacts and reduce clutter. They can be propelled with screw propellers with antialghe system or with paddle wheels. The draft can be as little as 30-35 cm. Considering the hull distance from the edge to the collection point reached by the arm, the dredger can also operate on the shores. There are built in series, therefore it is possible to choose with the client the possible combinations of cutting, collection, storage, unloading, size, etc.

NEW BUILD - Amphibians

ex factory, Italy
ID: 1060


ID: 1060

DescriptionNEW BUILD - Amphibians
Date Launched
Built to Order
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

Material: steel, stainless steel or aluminum. Technical Description: Any type of our production vessel for the cutting and collection of algae can be transformed into amphibian and therefore work both in water and on land , being able to climb to the shore due to the three pairs of rubber wheels twinned or tracks to be fitted. The cutting equipment solutions can be decided with the customer.

ID: 1998

DescriptionCenturion 25 Pilothouse Minitug
Date Launched
Built to Order
Length7.88m (25ft)
Beam2.95m (9ft 8in)
Draft0.6m (1ft 11in) unladen
LocationSingapore
BrokerGeoff Fraser
PricePOA

The Centurion 25 Pilot house Minitug is our latest upgraded design of the Centurion 25 Minitug incorporating a Pilothouse at the bow for working in different weather conditions. The boat is constructed tough and strong with a static bollard pull of almost 2000kg. Constructed with multiple chambers, foam filled construction with self-draining cockpit, this boat provides safety for crews working in open waters. Boat is suitable for use as a mooring boat, small tug or pusher, pulling oil booms, or even as a general-purpose workboat.

ID: 1044

DescriptionNEW BUILD - Watercraft Notching Star
Date Launched
Built to Order
LengthDimensions and working characteristics are defined in collaboration with the customer
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

Small to medium workboats fitted at the stern with twin screw propellers for propulsion and two bow propellers that are star-shaped, independent and adjustable in depth, adapted to the cutting of algae.  These are particularly suitable for the opening of waterways in dense vegetation. Dimensions and working characteristics are defined in collaboration with the customer.

ID: 1059

DescriptionNEW BUILD - Watercraft Pickup
Date Launched
Built to Order
Length6 to 9 mt. length with 2.4 mt beam / 9 to 15 mt. length with beam up to 5 mt.
Draft0.35 - 0. 40m
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

Natanti acts to cutting, collection, grubbing and infested vegetation drain and floating solid waste or semi-submerged . The cutting system and frontal collection consists of a U-shaped cutter toolinstalled on a conveyor belt, adjustable in depth, able to charge what has been collected in the central storage container.  They can be propelled with screw propellers with antialghe system or with paddle wheels.

NEW BUILD - Milling Cutter

ex factory, Italy
ID: 1042


ID: 1042

DescriptionNEW BUILD - Milling Cutter
Date Launched
Built to Order
Length6 - 9 m
Beam2.5m
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

This is watercraft equipped with rollers with knives or zappette acts grubbing of roots at the bottom of the channel, or lagoon, and all 'oxygenation of the same. They also allow pianeggiare the seabed after the grubbing operation. They are equipped with two or four rollers depending on the size of the hull. They can work at times even in the absence of water, moving on the ground thanks to the rollers.

ID: 1041

DescriptionNEW BUILD - Weeders Mono / Twin Propeller
Date Launched
Built to Order
Length6m (19ft 8in)
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

These motorboat weeders are designed with the customer to meet the specific job requirements. The T rattasi is a small motorboat designed to only cut algae, reeds and bushes on the shore, in the canals or small streams. The material cut in the middle of the cutter bar overturned T placed at bow , tilt to the right and left by 90 °, it remains to float in surface and, thanks to the current is conveyed in a single collection pointgenerally represented by small dams consist of gates ever made by us.

NEW BUILD - Mini Harvester

ex factory, Italy
ID: 2172


ID: 2172

DescriptionNettuno Motobarche HARVESTER MINI
Date Launched
Built to order
Length4m (13ft)
Beam1.6m (5ft 2in)
Draft0.3m (11in)
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

Nettuno Motobarche is an Italian shipyard specialized in river, shore and harbour maintenance workboats.  They design and build aquatic weed harvesters in a range of sizes to meet all needs with many models in service in various parts of the world. HARVESTER MINI is the smallest in their range and it is designed for easy transportation and deployment. This workboat is especially developed for removing plant growth from embankments and waterway, and thanks to her a limited draft and compact size can operate very close to the shore and in areas where larger vessels would not be able to work. These environments are usually very hard on machinery of any kind and in order to withstand years of hard use and neglect HARVESTER MINI is entirely built in stainless steel with the added protection of an epoxy coating. The boat can be equipped with a variety of cutting devices to be able to operate even in difficult situations.  There are also additional features that can be added to the standard model, including protection for the pilot, storing tanks, etc. Engine maker and fuel tank capacity are per Owner’s requirements. 

ID: 4153

DescriptionNEW BUILD - RAscal 1600 Line Handling Launch
Date Launched
Built to Order
Length15.6m (51ft 2in)
Beam6.0m (19ft 8in)
Draft1.7m (5ft 6in)
Locationex Shipyard, Hong Kong
BrokerJohn Kearns

The Robert Allan Ltd. Designed RAscal 1600 is designed to provide improved efficiency, comfort, and safety for its work role. Although having the outward appearance of a tug, the RAscal 1600 is a launch with lighter construction and slimmer, more streamlined hull. The hull and deckhouse are steel, constructed to Lloyd’s rules, and outfitted to international regulatory standards. It is powered by a single Caterpillar C18 engine rated 447 kW (600 hp) driving a one metre diameter four-bladed propeller in a steering nozzle via a Twin Disc MGX-5146SC, 2.5:1 reduction gearbox and a stainless-steel shaft. The steering nozzle provides good efficiency and manoeuvrability ahead as well as excellent stopping and reverse performance and control. Comfortable overnight accommodations for three crew are provided in the foc’sle. Fit out includes two cabins, a pantry, mess, and washroom with shower. There is also a crew rest area in the spacious wheelhouse. Visibility to the sides, forward, and overhead is also excellent. A protective pipe cage is fitted over the house to prevent the ship’s mooring lines snagging on the house.

ID: 4150

DescriptionNettuno Motobarche HARVESTER
Date Launched
Built to Order
Lengthfrom 9.70m (32’) to 15.00m (49’)
Beam4.50m (15’)
Draft 0.30m (1’)
Locationex factory, Italy
BrokerGiuseppe Filippone
PricePOA

The HARVESTER is a workboat equipped with a frontal conveyor belt , adjustable in depth and equipped with cutter bars (one horizontal and two verticals). The materials collected are then transferred to a central storage conveyor belt that moves them toward the rear or lateral discharging conveyor belt. The discharging conveyor belt, once near the shore, can discharge the weed directly on the ground, on a truck or on another boat.

ID: 4107

Description9m Workboat
Date Launched
Under Production
Locationex factory, Portugal
BrokerRichard Pierrepont
PricePOA

Main Features to address Hazmat response. Crew + 4 HNS team. Up to 22 knots with CPP (30 knots with WJ).

ID: 4091

DescriptionOil Spill Response Workboat
Date Launched
2017
Length9.2m (30ft 2in)
Beam3m (9ft 10in)
Draft0.8 (2ft 7in)
LocationPortugal
BrokerRichard Pierrepont
Price330,000 EUR

Designed and developed by engineering teams from Portugal, England, USA and Norway and built at Peniche Shipyard. This is the first workboat the company has produced for oil spill response. It is a special workboat, equipped with a controllable pitch propeller (CPP). This system can deliver high-speed and also to the required Bollard Pull to tow oil containment booms (up to 3 ton) The workboat was built to achieve much lower noise and vibration levels.

ID: 2063

DescriptionNEW BUILD - Centurion 30 Minitug Catamaran
Date Launched
Built to Order
Length9m (30ft)
Beam3m (9ft 10in)
Note2000kg Bollard Pull
LocationSingapore
BrokerGeoff Fraser or Richard Pierrepont

This Centurion 30 Minitug is constructed with a catamaran hull design for higher stability during work. Twin Isuzu 320hp Marine diesel engine is combined with powerful Hamilton Waterjets to give it a 2000kg bollard pull. A hydraulic capstan is also installed on deck to allow oil hoses to be pulled onboard for maintenance before releasing it back to service offshore.

ID: 2025

DescriptionNEW BUILD - 15m Mooring Boat
Date Launched
Built to Order
Length14.80m (48ft 6in)
Beam4.80m (15ft 8in)
Draft1.40m (4ft 7in)
Note31.80 tons
Locationex factory, Turkey
BrokerRichard Pierrepont
PricePOA

Bollard Pull: 5+ ton. Speed: 10.2 knots. 2 x Cummins QSL9. Total Power: 2 x 298kW (405hp) @ 210 rpm. 2 x Fixed Pitch Propellers.

ID: 2024

DescriptionNEW BUILD - 15m Mooring Boat
Date Launched
Built to Order. Delivery 80 days from contract signing.
Length14.95m (49ft)
Beam5m (16ft 4in)
Draft1.4m (4ft 7in)
Note33.8 tons
Locationex factory, Turkey
BrokerRichard Pierrepont
PricePOA

Main Engines: 2x Cummins QSL9. Total Power: 800HP. 11 knots. Propulsion: 2x Eris Fixed Pitch Propellers 1100mm Diameter.

6.5m RIB - FOR CHARTER

Portsmouth, UK
ID: 4018


Charter rates by negotiation

Full Details

ID: 4018

DescriptionCrew Transfer / Construction Site Tender / Light Survey Operations / Light Cargo Transport
Length6.5m (21ft 3in)
Beam2.30m (7ft 6in)
Draft0.5m (1ft 7in)
Note1 x Yamaha Engine
LocationPortsmouth, UK
BrokerRichard Pierrepont
PriceCharter rates by negotiation

Class: MCA Cat 3 – 20 nm. Engine: 1x 115 HP Yamaha. Speed: Up to 35 knots. GPS, AIS, Radar, Chartplotter, Loud Speaker, Rotating Light.

8.4m Construction Site Tender - FOR CHARTER

Portsmouth, UK
ID: 4017


Charter rates by negotiation.

Full Details

ID: 4017

DescriptionCrew Transfer / Construction Site Tender / Light Survey Operations / Light Cargo Transport
Date Launched
2006
Length8.4m (27ft 6in)
Beam3.5m (11ft 5in)
Draft1.19m (3ft 10in)
Note1 x Suzuki Engine
LocationPortsmouth, UK
BrokerRichard Pierrepont
PriceCharter rates by negotiation.

Class: MCA Cat 3 – 20 nm. Engine: 1x 250 HP Suzuki. Speed: Up to 37 knots. GPS, AIS, Radar, Chartplotter, Loud Speaker, Rotating Light.

ID: 2094

DescriptionNEW BUILD - Scavenger HYD22 Weed Harvester
Date Launched
Built to Order
Length8.17m (26.8ft)
Beam2.1m (6ft 10in)
Draft0.3m (1ft)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Scavenger HYD22 Weed Harvester is the latest dual purpose river maintenance boats designed by FiveAB Group. This boat can be used for collecting floating rubbish via the conveyor belts directly into the boat. It can also be used to cut underwater weeds up to 1.2m depth and the weeds will be collected immediately via the conveyor and into the boat for disposal.  The unique twin propeller propulsion system will give you extremely good manoeuvrability in tight situation and can even rotate the vessel on the spot.

NEW BUILD - 11m Patrol Vessel

ex factory, India
ID: 439434


ID: 439434

DescriptionNEW BUILD - 11m Patrol Vessel
Date Launched
BUILT TO ORDER
Length11.00m
Beam4.20m
Draft0.80m
Locationex factory, India
BrokerGeoff Fraser
PricePOA
Price NotesPlus Tax if Applicable.

GRP Catamaran Patrol Boat. The speed estimate of the vessel is over 35 knots using surface drives with 100% load factor. The base price includes two universal Tripod Gun Mounts. The vessel has a range of 300nm at cruising speed in standard load condition. Main Engines: 2x 400 HP. Propulsion: Surface Drives. Speed Cruising: 25 Knots, Speed Sprint: 35 Knots. Passengers: 10, Crew: 2. Designed by: Mark Ellis Marine Design

ID: 2096

DescriptionNEW BUILD - Scavenger HYD30 Weed Harvester
Date Launched
Built to Order
Length9.2m (30ft 2in)
Beam3m (9ft 10in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Scavenger HYD30 Weed Harvester is our latest and very effective weed harvesting boat that is capable of cutting weeds up to 2 metres below water surface. The high speed cutting blades and conveyor system can easily cut and remove unwanted water weeds up to 3 tons within 30 minutes. The twin propulsion system makes the boat highly maneuverable even in extremely tight places, allowing it to even turn 360 degrees on the spot. The Scavenger HYD30 also doubles as a floating rubbish (floatsam) removal boat with the stainless steel conveyor system and large cockpit area. This is an extremely tough and reliable workboat essential in the maintenance of waterways, and reservoirs. It is suitable for use in Salt or Freshwater.

ID: 3021

DescriptionNEW BUILD - Centurion 24 General Workboat
Date Launched
Built to Order
Length7.3m (24ft)
Beam2.5m (8ft 2in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crew or equipment and having a top speed of 18 knots, this boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

ID: 3015

DescriptionNEW BUILD - Vigilant 18 RHFC Workboat
Date Launched
Built to Order
Length5.4m (17ft 8in)
Beam2m (6ft 6in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The new VIGILANT 18 RHFC (Rigid Hull Foam Collar) workboat is similar to the Industry Standard Rigid Hull Inflatable Boat (RHIB) except that we have substituted the inflatable collar with a puncture proof foam collar! This special foam collars are made from Closed Cell Foam and then covered with our special spray technique to encase the foam collar with our proprietary PU skin. To make it even tougher, we double reinforced the PU skin with reinforced netting to make it virtually indestructible. The Vigilant 18 RHFC is a premium quality workboat that is unsinkable even when totally flooded with water and is suitable for inshore and offshore use.

ID: 3014

DescriptionNEW BUILD - Scavenger 40 Aquatic Loadmaster
Date Launched
Built to Order
Length12m (30ft)
Beam3.6m (12ft)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Scavenger 40 LoadMaster is a specially designed weed pulling and floatsam collection boat with a hydraulic crane installed onboard. The boat is built as a standalone unit that can move to a selected location to pull weeds and collect it onboard for dumping at a designated collection point. The LoadMaster is designed with a long reach crane to reach for weeds up to a depth of 2 metres and has a pulling force of up to 450kg. The large open deck has a carry capacity of up to 5000kg of weeds, floatsams/rubbish per trip making it a highly efficient and economical boat for environmental cleaning.

ID: 2097

DescriptionNEW BUILD - Scavenger 30 Aquatic Master
Date Launched
Built to Order
Length9m (30ft)
Beam3m (10ft)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Scavenger 30 AquaticMaster is a specially designed floatsam collection boat with conveyor collection system. The boat is built as a standalone unit that can move to a selected location to collect rubbish / floatsams and collects it onboard for dumping at a designated collection point. The AquaticMaster also has a weed cutter attached to the end of the conveyor head to cut weeds up to a depth of 2 metres. The large open deck has a carry capacity of up to 4000kg of floatsams / rubbish per trip making it a highly efficient and economical boat for environmental cleaning.

ID: 2092

DescriptionNEW BUILD - Centurion 26 Dive Support Boat
Date Launched
Built to Order
Length8.21m (26ft 11in)
Beam2.93m (9ft 7in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 26 is a specially designed "tri-hull" design for unsurpassed stability for working at rest, dry riding in rough weather condition. The boat is protected by its 8mm thick hull plate with fully reinforced side frames 600mm apart. Specially formulated light weight Polyurethane foam fenders are installed all-round the gunwhale for further protection. The boat can be used as a diving support vessel and has a large cockpit that can be used for installation of diving panels, compressed air tanks and also a detachable side diving ladder. The boat has a loading capacity of 2000kg which makes it suitable as a general workboat, crew transfer boat.

ID: 2064

DescriptionNEW BUILD - Centurion 30 Minitug Monohull
Date Launched
Built to Order
Length9m (30ft)
Beam3m (9ft 10in)
Note2000 - 2300kg Bollard Pull
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 30 Minitug is a larger minitug workboat designed for hose handling with a bollard pull of approx 2000 to 3000kg depending on engine configuration. It is powered by twin ISUZU Inboard diesel engines coupled to either an inboard propulsion system or with a Hamilton Jet. Similarly, to the Centurion 30 Minitug Catamaran, a hydraulic operated Capstan with a pull capacity of 2000kg is installed onboard to pull floating hoses onboard for maintenance purpose. It can also act as a crew transfer boat, or as a general purpose workboat.

ID: 2062

DescriptionNEW BUILD - Centurion 24 Fireboat
Date Launched
Built to Order
Length7.14m (23ft 5in)
Beam2.5m (8ft 2in)
Locationex factory, Singapore
BrokerGeoff Fraser or Richard Pierrepont

The Centurion 24 Fireboat is a unique standalone, mini-Fireboat with a 1000 litres per minute fire fighting pump coupled with the latest computerized foam mixing system. This powerful little boat is small enough and easy to maneuver in tight locations in the marina or canal systems and will go where your normal fire engines is unable to reach. The Centurion 24 is also a small mini-tug boat with a static bollard pull of 1 ton and can also be used as a pusher tug. It can easily tow a large motor yacht that is on fire and bring it out of reach of other vessels. The Centurion 24 Fireboat will be a very useful boat when fighting fire near ports, marinas, open berths, canal homes, Oil and Gas installations where the normally big fire boats is unable to enter.

NEW BUILD - 29ft Harbour Launch and Harbour Pilot Boat

ex factory, UK
ID: 2014


As a guide only, approx 350,000 GBP ex works

Full Details

ID: 2014

DescriptionNEW BUILD - 29ft Harbour Launch and Harbour Pilot Boat
Date Launched
Built to Order
Length8.96m (29ft 4in)
Beam3.04m (9ft 11in)
Locationex factory, UK
BrokerRichard Pierrepont
PriceAs a guide only, approx 350,000 GBP ex works

Seaward Nelson 29 Harbour Launch and Harbour Pilot Boat. The Seaward Nelson 29 shares the same sea-kindly semi-displacement hull form as her larger sisters the ubiquitous Nelson 35, 40 and 42. She is available either as a Service Patrol Boat or in the dedicated aft wheelhouse, mid-engine Pilot Boat layout.

ID: 588090

DescriptionNEW BUILD - Blyth 19m Research Vessel
Length19.00m
Beam6.95m
Locationex Factory, UK
BrokerRichard Pierrepont
PricePOA

Engine: twin MAN 900HP. Speed: 24.5 knots. Bespoke deck and cabin layout to ensure all your commercial needs are met.

ID: 588088

DescriptionNEW BUILD - Blyth 14m Series
Length14.00m
Beam4.96m
Locationex factory, UK
BrokerRichard Pierrepont
PricePOA

Blyth Workcats are built entirely in the UK from one piece tooling for exceptional strength. All engineering and electronics are installed by in-house engineers and stainless steel fittings are custom made within their own fabrication workshop, offering a completely bespoke service to our clients.The company works closely with naval architects and surveyors of the highest professional standing and we take pride in our ability to construct vessels to meet or exceed the rigorous standards required for MCA Code of Practice, Seafish, Irish P5 and MCA P5&6.The original Blyth 33 has now become the Blyth 10m, evolving and improving with time and experience, making her performance second to none. In recent years, the company has developed 11, 12, and 14m catamarans with a wide selection of 14 Cats delievered to date.

ID: 588086

DescriptionNEW BUILD - Blyth 11m Series
Length11.00m
Beam4.20m / 4.96m
Locationex Boatyard, UK
BrokerRichard Pierrepont
PricePOA

The Blyth 11m is available as both an asymmetric hull form and the Deep Vee planing hull form. The asymmetric has a fine forward section developing into a medium deadrise single chine form aft allowing the vessel to plane for high speed operations. Fitted with water jets it offers extremely shallow draft and excellent sea keeping characteristics. The deep Vee used commonly for our general workboat application has a very fine entry which has the design optimised for low resistance, exceptional levels of performance, economy and comfort.

NEW BUILD - 8.09m Road Transportable Multi-purpose Workboat

ex Shipyard, Netherlands
ID: 617614


From EU 115,000 excluding VAT, duties etc

Full Details

ID: 617614

DescriptionNEW BUILD - Bumper 803
Date Launched
Delivery 2 weeks from time of order.
Length8.09m (26ft 6in)
Beam2.99m (9ft 9in)
Draft1.45m (4ft 9in)
Locationex Shipyard, Netherlands
BrokerGeoff Fraser
PriceFrom EU 115,000 excluding VAT, duties etc

The BUMPER 803 is a road transportable multi-purpose workboat for inland waters. The large deck area, the shallow draft, the telescopic topdeck and the pushbow makes the BUMPER 803 a versatile boat that can be deployed for shore works, ferry work (up to 12 passengers) as well as pushing and towing activities. Built to Order.

NEW BUILD - 14.95m Workboat

ex Shipyard, NSW, Australia
ID: 424386


ID: 424386

DescriptionNEW BUILD - 14.95m Workboat
Date Launched
2011
Length14.95m
Beam7.0m
Draft1.0m
Locationex Shipyard, NSW, Australia
BrokerIvan Colaco

This 14.95m Workboat is suitable for a range of applications. Survey: 2C. Main Engine: 2x CAT 3306 220kW each. Gearboxes: 2x twin plate gearbox and propeller shaft. Top Speed: 8.5 knots approx. Fuel: 11,600 litres. 4 Point Anchoring System. A-Fame: 10 Tonne. Deck Winch: 30 Tonne central deck winch. Deck Crane: 4.6 Tonne Palfinger PK12500C. Moon Pool: 400mm diameter


The details of all vessels are offered in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Any buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to sale, price change, location or withdrawal without notice.

Australia  -  Bulgaria  -  Indonesia  -  Italy  -  Malaysia  -  New Zealand  -  Philippines  -  Singapore  -   United Kingdom  -  USA -  Venezuela

Copyright © 2020 SeaBoats | Website Designed by Nucleus Creative & eDIY.