NEW BUILD - 6.3m Landing Craft

ID: 4173

LAVAMPOSTO LC 630 is a multipurpose landing craft intended for light load transportation, garbage collection and disposal, surveillance duties, fire inspection, buoy setting, etc. She can also be employed as a tender for large yachts thanks to her capacity to carry heavy and cumbersome equipment or as a support boat for various water sports. Made for high speed operations, this landing craft provides a highly maneuverable platform and a shallow draft underway.  The ramp design allows for easy loading directly on and off the vessel from the shoreline. Small and easily trailered, she is a real “workhorse” with a load capacity of 1.5 tons. Service speed with the standard 115 Hp outboard is over 25 knots.

BRAND NEW - 7000t Deck Barge

ID: 4170

This ship is a domestic offshore deck transport ship. This ship is mainly used to transport large prefabricated parts, pipes, piles and other large cargoes, and also used to transport bulk cargoes, all of which are non-combustible cargoes. The design load of the cargo deck is 10t/m2. The ship's designed navigation area is an offshore navigation area. The ship is equipped with 5 watertight transverse bulkheads, which are located at the #3, #16, #31, #143, #151 frame positions. Stern ballast water tank, steering gear room, engine room, NO.5~NO.1 side ballast water tank and bottom ballast water tank, emergency fire pump room and fresh water tank (left and right), and fore tip tank are arranged in sequence The water tank and the first empty tank. There are three deckhouses above the first floor. Between each deck there is an enclosed enclosed main stairway, and there are inclined stairs for access outdoors.

NEW BUILD - 7.9m Landing Craft

ID: 1759

7.9m x 2.8m open console/aft cover type landing craft, marine grade aluminum construction from CNC kit-set. Two x 115HP engines or 1 x 200/250HP engine and controls, Owner supply. Hydrive hydraulic steering set. Half cover aluminum, forward cover canvas. Primer and anti-fouling applied to area below waterline. Two zinc anodes fitted at transom. Forward door per plan with pulley system to lower and raise. Full length hand rails. Seating with timber finish for pax. Seating with timber finish at pilot console position. Open pilot console position. Aft fixed cover, forward frame for soft cover.

BRAND NEW - 7000T LCT Deck Barge

ID: 3997

This ship is a deck cargo ship, suitable for carrying steel, block stones, engineering equipment, engineering vehicles, containers, sand, rocks, coal mines and many more. The ship is made of steel, continuous single deck, double bottom, inclined stem, welded steel plate It has a bilge keel, which is transmitted by two marine diesel engines through a gearbox to drive two fixed-pitch propellers to propulsion type ship. There are three deckhouses on the raised aft deck.

NEW BUILD - 55m Landing Craft Utility

ID: 3985

Used by amphibious forces to transport equipment and troops to the shore Capable of transporting 2x M60 Full Tracked Combat Tank or 5 x 5-ton Military Truck or 2x 105mm M2A1(M101A1) Howitzer or 12 x 5-ton Humvee (HMMWV) or fresh water supply and troops from amphibious assault ships to beach heads or piers. Features: Supplying fuel oil and fresh water at sea or remote area; Ro-Ro operation by hydraulic controlled bow-aft ramp. Separated two engine rooms by watertight bulkhead, providing a redundancy in case of battle damage.

109.69m Multifunctional LCT Transport Barge

ID: 3969

276TEU. Built: 2022. Class: China ZC. Flag: China. Max Full Load Capacity: 9000t. Main Engine: NINGBO CSI diesel engines two units 1103+1103kw. Speed: 12kn. Accommodation: 12

New 34.40m Landing Craft

ID: 3940

Cargo Tank cap: 242,900 liters. Main Engines: 2x 255HP Yanmar Marine Diesel 6CH-UTE 2,250 RPM (Brand New). Speed: 8 Knots. Fuel Tank Cap: 21,440 Liters. Fresh Water: 20,450 Liters.        

NEW BUILD - 22m Landing Craft

ID: 4110

Vessel Type: Twin screw monohull landing craft. Classification: UK MCA Workboat Code of Practice (MGN280) CAT 2. Area of Operation: 60nm from safe haven. Crew: 3 Crew. Construction: Welded steel. Cargo Deck Strength: 1.5t/m2. Free Running Speed (Loaded): 9 knots Approx. Cargo Capacity: 50 tonnes total (with restricted crane operations). Main Engines: Doosan L126TIH – 2 x 360hp @ 2000rpm. Deck Crane: Heila HLRM 35/5S (1550kg @ 14.79m).

NEW BUILD - 39m Landing Craft

ID: 1733

Well equipped New Build LCT ready for fast delivery. Length Overall: 38.225m, Length (Main Deck): 36.576m. Crew: 8 Men. Fuel Oil: Approx. 150m3. Fresh Water: Approx. 14m3. 2x Marine Engine; 500hp@ 1800rpm Cummins. 2x Genset: 4tnv98-Gge2; 28kw Yanmar.

NEW BUILD - 18.6m Landing Craft

ID: 3094

This is offered as a kitset for any builder and we can also arrange a builder in a few locations.. Standard specs are: Main Engine: 2x Scania D109 072M 294kW (400hp) @ 2100rpm. Propulsion: 2x Hamilton HJ403 Jets. Survey: NSCV 2C. Marine Grade Aluminium. Deck Area: 80m2. Axel Load: 7 tonnes. Deck Load: 2 t/m2. Payload max: 60 tonnes (cg 0.75m above deck NSCV 2C). Clear Width: 3.8m. Clear Height: 3.4m. Design Displacement: 82t (NSCV 2C). Design Displacement: 106 t (300 freeboard). Side Windage: 71m2 (with truck on deck).

NEW BUILD - 12m Truckable Barge

ID: 425646

NEW BUILD Truckable Barges for immediately delivery. Length: 12 metres. Beam: 3.20 metres (per pontoon). Depth: 1.20 metres. Draft assembled: 0.40 metres. Draft loaded: 1.0 metres. Deadweight Capacity: approx. 30 tonne. Tough, sturdy, reliable multi-purpose workboats and dumb / construction barges with a quick turnaround time. These vessels have the highest quality workmanship at an extremely competitive price.

NEW BUILD - 10.3m Multi-Purpose Cat Landing Craft

ID: 3385

Designed by the renowned designer Rick Welin (Canada) this very versatile workboat can handle serious loads for her size. Whether you need a Landing Craft, Dive Boat, Recovery Platform, Fish-Farm Tender, Portable Work Platform, Crew Boat, or ALL of the above, she can handle the job. This is a "Do Anything" coastal worker, and she's trailerable. Designed to Lloyd's Registry Small Craft Scantlings rules for workboats she'll pass muster in any workboat category. The through-deck Moon-Pool allows her to hover above underwater loads for lifting at her center of flotation which allows a lifting capacity beyond that of any deck-mounted Hiab type of configuration. (NOTE: She can be built without the moon-pool as well). Other cabin sizes and configurations can be created as modifications to suit the owner needs. You may need an open deck with center console, or a small hardtop for instance. Or a larger cabin for crew-boat or water-taxi type of operations. 6mm bottom plating with beaching plates means never having to worry about landing on gravel shorelines, and her twin hulls mean you can ground her on any tidal flat and she'll sit level to provide versatility. Catamaran hulls lend themselves to beached stability beyond any mono-hull Landing Craft. Outboard power allows for a range of powering options depending on budget or speed requirements and affords the busy commercial operator the ability to upgrade or re-power at any time without significant downtime.

NEW BUILD - MODCAT 1200 SD Workboat and Transport Solutions.

ID: 1603

In association with Sloane Marine, we have developed our range of SML 1200 Workboats. A work platform for use in all industrial sectors. This sturdy vessel is a multi-role vessel, capable of Off Port Limits (OPL) work. It boasts a diverse range of deck layouts, offering a turnkey solutions for multiple commercial sectors.

NEW BUILD - Landing Craft 8.5m

ID: 3142

Versatile planing Landing Craft. Deck space: 26m². Weight - Boat Only: 2256kg. Payload (SWL): 4000 kgs. Passenger Capacity: up to passengers 16 @ 82.5kgs. Trailerable. Recommended Propulsion: 2 x 80 - 115 HP

NEW BUILD - 8.6m Landing Craft - Enclosed Wh

ID: 2134

LAVAMPOSTO LC 860 is a tough, aluminum workboat suitable for a variety of demanding applications.  Specifically designed to perform well even in difficult conditions, this boat offers huge deck space and loading capability but at the same time can be easily trailered. Every LAVAMPOSTO LC 860 is custom built and fully outfitted with all the necessary features and specifications that are exactly right for the duties it will be expected to perform.

NEW 37.5m Landing Craft.

ID: 1508

Landing Craft. Built: Samarinda, Indonesia. Classification: Syahbandar Samarinda. Gross Tonnage: 191. Cargo Tank Capacity: 300 ton. Fresh Water Capacity: 15 ton. Main Engine: Mitsubishi 6DC 40 x 2 unit. Horse Power: 350 HP x 2 unit.

NEW BUILD - Landing Craft 840

ID: 2268

The 8.4 m semi-deep V hull weighs only 2.25 tons, and offers 26 square metres of deck space with a 150 litre under deck built-in fuel tank and reinforced gunnels allowing very little flex. The hull configuration includes a self-draining wet deck, dual motor mounts, motor guards, 6 sturdy bollards fitted to the gunnels, helm console, helm seat and 2.0 m bow ramp. A canopy top over the helm console, seating for passengers, anti-fouling to the waterline and non-slip deck surface, for the safety of crew and passengers alike, are optional. Due to it's main purpose requiring optimal available deck space, stowage space is at a minimum above deck level on this boat. If required, under deck stowage can be incorporated into the hull design, closed with flush-mounted hatches and passenger seating can double as stowage.

NEW BUILD - 18ft Landing Craft

ID: 1774

Style meets versatility; this 18ft landing craft is your key to next level recreational activities. Thick gauge aluminum allows you to land this boat anywhere and walk out through the front door with ease. Whether you’re hauling equipment or you’re hoping to land on a remote beach for a picnic, this vessel will let you get the job done in style. 

NEW BUILD - 45m Cargo Passengers Landing Craft.

ID: 1719

Flag: Indonesia. Classification: Biro Klasifikasi Indonesia. Free deck space 240sqm ( 8 x 30m2 ). Can accommodate : 15 cars + 4 medium size trucks + 150 paxs. Main Engine: 2 unit Yanmar Marine Engines 6 HYM-WET 500 ps. 1.950 rpm (new).

NEW BUILD - 97.83m 4788dwt Landing Craft

ID: 1265116

97.83m 4788dwt LCT (Actual could load 6000dwt). Class: ZC. 4788DWT. M.E: ZIBO DIESEL LZ6250ZLCZ× 735KW×2sets. Hold: 1. Deck Strength:10t/sqm. Ramp area: 5.5M(W) ×12M(L).

NEW BUILD - 25ft Landing Craft (LC23)

ID: 1495

Very High Quality 7.62 Versatile Landing Craft. 18degree V bottom. Max Displacement: 10000lbs (8Passengers plus driver, 1500lbs payload, full fuel). Projected speed of 35 knots with twin 150hp engines.

NEW BUILD - 31m Landing Craft Tank

ID: 1628

Type of Vessel: Landing Craft Tank. Classification: BKI. Design Speed: 8 Knots. Fuel Oil Capacity: ± 200 ton. Cargo Water Capacity: ± 12 ton. Main Engine: Yanmar 2 X 250 HP

NEW BUILD - 9.6m Landing Craft

ID: 1556

The 9.6 m semi-deep V hull weighs only 2.6 tons, and offers 30 square metres of deck space with a 200 litre under deck built-in fuel tank and reinforced gunnels allowing very little flex. The hull configuration includes a self-draining wet deck, dual motor mounts, motor guards, 6 sturdy bollards fitted to the gunnels, helm console, helm seat and 2.2 m bow ramp. A canopy top over the helm console, seating for passengers, anti-fouling to the waterline and non-slip deck surface, for the safety of crew and passengers alike, are optional. Due to it's main purpose requiring optimal available deck space, storage space is at a minimum above deck level on this boat. If required, under deck stowage can be incorporated into the hull design, closed with flush-mounted hatches and passenger seating can double as stowage.

NEW BUILD - Centurion 36 Landing Craft

ID: 1503

Marine Grade Aluminium Alloy (5082H321). Powered by: Twin Mercury Verado 200hp Outboard Engines. Fuel Tank Capacity: Built-in 1500litter Fuel Tank. Class Type: B.V Class for Hull available as option.

NEW BUILD - 20m Landing Craft

ID: 1494

Vessel Purpose: Construction and Maintenance support, Cargo Supply, Personnel Transfer, etc. Vessel Type: Monohull, Semi displacement. Hull: Aluminium Alloy. Superstructure: Aluminium Alloy. TANKAGE: Fuel Oil: 2,000 litres ( approx ), Freshwater: 250 litres ( approx ), Sewage Holding: 250 litres ( approx ). OPEN DECK SPACE: Area: 58 sq metres ( approx ), Deck strength: 2 ton/m2. Compliment: 28 passengers + 2 crew. Classification Society: Bureau Veritas. Main Engines: 2 units CATERPILLAR C9.3, 375bhp @ 1800 rpm. Propulsion: 2 x MJP or HAMILTON Waterjets.

NEW BUILD - 12m Barge

ID: 409622

12m DUMB BARGE. SLOPED ENDS FRONT & BACK. 4 SETS OF BOLLARDS. TIMBER BELTING IN STEEL CHANNEL ALL AROUND DECK LEVEL (100mm). 6mm DECK PLATING. 6mm STEEL HULL PLATING. 600mm VERTICAL TUBE THROUGH THE BARGE FOR UNDERWATER LIFTING. 4 X WATERTIGHT COMPARTMENTS.

NEW BUILD - 9m LCT

ID: 1490

We offer this 9m aluminium landing craft for those who want simple and cost effective transport opportunities to carry passengers or cargo to secluded locations and beaches.

NEW BUILD - 13m Aluminium LCT

ID: 1483

New Build- 13m Aluminium Landing Craft built out of Aluminium 1100 double hull and bottom. Ideal for local cargo transport of 20 NM. Lightweight at 2 ton and displaces 17ton. Cargo area 8m x 2.6m. Build time 3 months from signed contract.

NEW BUILD - 18m LCT

ID: 1437

We would like to offer a new build 18m Aluminum "shallow draft" Landing Craft. This vessel is ideal for cargo transport to difficult to reach coastal locations. The vessel is built in East Java, Indonesia and the build time is 4-5 months.

NEW BUILD - 70m LCT

ID: 4041

Deadweight at design draught abt. 1800 tons. Fuel oil tanks abt. 100 cu.m. Fresh water tanks abt. 100 cu.m. Cargo deck area approx. 800 m2. Deck load 5 t/m2. Main Engine : ~735kW (1000HP) x 2. Speed is approx. 10.5 knots when loaded to design draft with the engines developing 100%MCR. Accom: 20 person. The deck load in cargo area to be 5t/m2.. Main Engine output, approx. : abt. 735 kW (1000HP). We can also supply 85m & 95m versions.

NEW BUILD - 10m Landing Craft with raised helm station

ID: 1406

Of compact dimensions and easily transportable this is a landing craft that can offer the maximum of deck space, great cargo capacity and a protected wheelhouse. Designed for serious work in demanding conditions, the boat is built in aluminum alloys (RINa certified) of heavy scantlings. Class /Survey: RINA , CE Category: B / C. The raised wheelhouse is slightly moved offset to one side and offers good protection and excellent visibility to pilot and co-worker. At deck level there is also room for a small but useful toilet.

NEW BUILD - 35 x 12m Deck Barge

ID: 988116

Barge: Bihter-1. DWT: 500 tons. Deck Strength: 10 tons / m2. Class: BV: I + Hull, Pontoon, restricted Navigation.

NEW BUILD - 45m LCT

ID: 413175

NEW BUILD - 45m landing Craft. Classification: ABS/BV/LR +A1 +AMS Unrestricted Services. Gross Tonnage: 490 approx. Dead weight: 300T approx. TANK AND LOADING CAPACITY (APPROX.): DOUBLE BOTTOM AND SKIN. Deck Area: 200m2* approx. Deck Cargo: 300 Tonnes approx. Deck Strength: 5 MT/m2. PERFORMANCE: Speed: 12 knots, Endurance: 20 Days. Ramp door: Hydraulic lifting. Side gate: With universal rollers to allow reeling on hoses from the ramp to the side. Reefer Connection: 6. Main Engines: 2 x 600 BHP @ 1800 rpm heat exchange cool ed, spark arrestors. In compliance with SOLAS, & Class requirement and requirement of Flag administration. Fully Air conditioned: Total 12 Berth.

NEW BUILD - 16m Landing Craft.

ID: 4097

LOA: 16m, LBP: 13.5m, Breadth mld: 6.5m, Depth mld: 1.8m, Draft aft: 1.9m, Oil Fuel Service: 2 x 2500 Litres, Fresh Water: 300 Liters.

NEW BUILD - 15m Flattop Barges built to order

ID: 1265697

Non propelled flat top barges built to AMSA DCV-2C. Sold with full stability documentation. Suitable for the carriage of project cargo or accommodation modules.

NEW BUILD - 10m Landing Craft with Enclosed Wheelhouse

ID: 3087

This Landing Craft has been designed for serious work in demanding conditions. Class / Survey: RINA / BV. CE Category: B / C. Passengers: 10. Crew: 2. Deadweight: 2900 Kg. Service speed @ standard power: 18 knots. Max speed @ standard power: 22 knots. Main Engines: single 250hp diesel or twin 140 hp diesels. The structure is of marine grade aluminium All materials have RINa / DNV certification. While the hull’s dimensions and structure are standard, many other features of the boat can be configured as per owner’s requirements. This includes deck layout, wheelhouse dimensions, engine type and power, tankage and deck equipment. The standard layout includes several high capacity storage options : 2 forward seat lockers with waterproof lids, 1 cabin seat locker and 2 dive bottles lockers (with a capacity of 6 50 lt. Bottles). 2 side doors (700 mm. wide) are located aft of the forward seats. They can be of the “flip down” or “lift out” type or hinged. The boat can be equipped with a small crane installed on a reinforced base. Push-knees (optional) are designed and built as per owner requirements to address specific work conditions. The standard walkaround wheelhouse is large and comfortable. It is designed to offer good protection to two or three crew members even in bad weather conditions for long work periods.

NEW BUILD - 85m LCT

ID: 4128

Deadweight @ Design Draft: 2300 t. Complement: 20P. Main Engine: 735kW x 2 sets. Clear Deck Space: 1120m2. Carriage of Containers: 116 TEU. Class Notation: BV: I + Hull + MACH, Deckship, Coastal Waters.

NEW BUILD - 95m LCT

ID: 4129

Deadweight @ Design Draft: 4800t. Complement: 20p. Main Engine: 1000kW x 2 set. Trail Speed (MCR at Design Draft): 10 knots. Freshwater: 100 m3. Fuel Oil: 150 m3. Clear Deck Space: 1830 m2. Carriage of Containers: 240 TEU. Class Notation: BV: I + Hull + Mach, Deckship, Coastal Waters.

NEW BUILD - 82.3m Deck Cargo Barge

ID: 3022

The vessel is an unmanned dump barge suitably equipped for carrying deck cargo for unrestricted services. The barge is all welded steel construction. It has flush deck and twin skegs. The main hull is divided by eight (8) transverse W.T. bulkheads and two (2) longitudinal W.T. bulkheads into twenty-seven (27) compartments.

NEW BUILD - 16m Truckable Barge

ID: 420486

Built to Order, Truckable Barges. Assembled Dimensions: 16.30 m x 7.05 m. Beam of Pontoon: 3.20 m. Depth moulded: 1.50 m. Weight Assembled: Approx 40 tonnes. Draft Assembled: approx 0.40 m. Draft Loaded: approx 1.00 m. Deadweight capacity: approx 60 tonnes

NEW BUILD - 30m Deck Barge

ID: 1950

.

NEW BUILD - 38m Landing Craft

ID: 1871

38.8m x 9m x 1.96m. Accommodation: 18 men. Ship’s Fuel: 33 Tonnes (approx.). Ship’s Fresh Water: 40 Tonnes (approx.). Cargo Fuel Oil: 200 Tonnes (approx.). Cargo Fresh Water: 195 Tonnes (approx.). Main Engine: 2x 350 HP @ 1800rpm.

NEW BUILD - 35m LCT

ID: 676548

Classification BV. Plying Limit Malaysian Water. Port of Registry & Flag Labuan, Malaysia. Basic Functions are Transport water, bunker, deck cargo, refrigerated containers. Ample space for working on deck. Capable for beaching. Deadweight: 350 appx. Tank and Loading Capacity (Approx): Fresh Water: 184m3, Fuel Tank: 288 m3, Deck Area: 106.47m2. Deck cargo: 200 Tonnes, Deck Strength: 3mt/sqm. Speed: 12 knots, Endurance: 23 Days. Power: 2 x 350 BHP @1800 rpm. Marine Engine: 2 x CUMMINS NTA855. Windlass - Electro Hydraulic Twin Gypsy. In compliance with SOLAS, & Class requirement &/ requirement of Flag administration. Fully air conditioned 10 berth.

NEW BUILD - 62m Landing Craft

ID: 420537

NEW BUILD 62m LCT. GRT: 1319 Tons approx. 4 x 1-berth cabins, 10 x 2-berth cabins. 2 x 848 BHP@1800 rpm (CAT 3412D). Speed is about 10.0 knots approx. Range about 6700 nautical miles. The vessel is to be constructed, with the latest Rules for Building & Classing of Steel Vessel under 90m (295ft) in length of American Bureau of Shipping.

NEW BUILD - 270ft LCT

ID: 627470

HPShips, a China based private shipyard, is glad to introduce this LCT vessel for you, featuring: Low draft. Less than 12 ft at design draft; Heavy load. The actual dwt is 4800; High power. Two main engines, nearly 986 horsepower each. Max Load Capacity: 4,800 Ton. Main Engines: (Maker,Type & Power) 6210ZLC-6/6210ZLCZ-6, 986BHP/735KW/830rpm. Zibo Disel Engine Company. Plate Thickness: Deck 15mm; Keel 14mm; Bottom 12mm. Navigation Area: Greater Coastal (200nm off shore). Complement: 14 persons.

NEW BUILD - 120m Accommodation Barge

ID: 472128

120m accommodation barge to be constructed, machinery installed and equipment in accordance with the latest Rules for Building & Classification of Steel Barges of American Bureau of Shipping for class. Maltese Cross + A1 Barge for unrestricted service with descriptive notation of MODU code and registry PANAMA Flag. The barge is all welded steel construction. The barge's accommodation is to be located on the forward main deck. The main hull is to be divided by transverse and longitudinal. The Vessel is equipped with Accommodations for 300-people. The barge is to be installed the 300T main crane (was made of husiman), 26T aux crane, the 8-point mooring system. 8 x 1-berth cabins, 14 x 2-berth cabins, 66 x 4-berth cabins, Total: 300 men. 8-point mooring system. Capstan: Type: 4x Vertical mount; Duty pull: 10 tonnes x 0 – 15 m/min. Tugger Winch: Pull: 15 tonnes. Pedestal Mounted offshore crane: 300 Tons SWL. Electric-Hydraulic Slewing Crane: 25T 5-26m, 12t 5.6-26.7m. Main Generator: CATERPILLAR 3412C; Rated power:620KW; No. of cylinder:V12. Emergency Generator: CATERPILLAR C4.4; Rated power:106KW; No. of cylinder:4. Bilge Pump. Sewage treatment plant. Fire pump. Communication and Navigation Equipment.