19m Workboat

ID: 4633

Ex Tug / Workboat. Reconstructed in 1980. Builder: Dutch Construction. Hull: Steel. Weight: 30 ton. Speed: 12 knots. Deck Area: 30m2. Deck Capacity: 8 ton (16-euro pallets). Seating: 1 crew & 12 pax. 1 x Cummins KT-1150-N;365hp (272 kW).

23.5m Workboat For Sale

ID: 4616

Hull material: Steel. Flag: United Kingdom. Class Society and Notation: Local UK Class. Main Engine: 1x Lister Blackstone. Speed maximum: 10 knots. Speed cruising: 8 knots. Latest Dry Dock June 2023. Pax: 12.

14m Multicat For Sale

ID: 4367

Built: 1986, The Netherlands. Flag: The Netherlands, Class Society and Notation: Local Dutch Inland Waters, Next SS: June 2024. Total power output: 188 bhp. Main Engine: 1x GM (Detroit Diesel). Single Screw. Overhauled 2020. Crane: Hiab Hlm 310/M T. Moon Pool: 600 Mm Dia.

17.50m Workboat For Sale & Charter

ID: 4585

Very low fuel consumption. The catamaran design leads to an excellent stability and maneuverability which is rare to find in the region. With an integrated 4 point-mooring system, a 20T winch with stern roller & A-frame. Can be perfectly used for many applications in marine construction works. Flag: TOGO. Class Society and Notation: INSB 30 nm offshore Cat – Workboat. Next Annual Survey: August 2024. Maximum Speed: 11 knots. Cruising Speed: 9 knots. Latest refits: cooling system from "polar" to "tropical" system, changed the main engines from Cummins to Baudouin 6M16 (2 x 264 kW), two new generators Weichai-Linz from. Average consumption at 1400 rpm less than 60l/h (2 main engines and 1 generator). Under charter until Dec 2023. Free Deck Space 102 m2.

13.01m Workboat For Sale

ID: 4584

The vessel arrived in Shetland in 1999, and was almost immediately laid up, for over-capacity in the operator's fleet. There are no notes on the history of the vessel whilst in Faroese ownership. It is purchased by current Owners in 2006, and immediately refurbished to vessel up to certification standard. It was in continuous use until early 2009, when the decision was taken to the vessel, and carry out a further refurbishment and wheelhouse renewal. It is flush decked, with a slight sheer, raised bulwarks forward and heavy bulwarks aft. The bow above the waterline is heavily raked, and even more so below the waterline in a ice-breaker format. The hull is single chine with a significant rise aft above the propeller, which is protected by line and an aft rudder post from the keel extension to the transom, which is heavily raked outwards. The deck is pierced by the engine exhaust and the engine access hatch, and is surmounted by a deck crane. There is a massive underdeck storage area, which were originally the cabin and hold for the vessel. Presently these areas are not utilised as cargo spaces, but only as void spaces. Main Engine: 1 x Doosan LO86 TIH.

7.5m Ultra Long Range Vessel

ID: 4571

BtB Marine’s 7.5m Ultra Long Range vessel “INDIGO” powered by COX Diesel outboard. Type of vessel: multi-purpose workboat. Classification: AMSA 2C. Port of registry: Hervey Bay, Australia. Flag: Australia. Designer: DMS Transport Solutions. Builder: BtB Marine, Australia. Harbour Patrol & Security. Crew Transfer. Ship Supplies, Inspections & Repairs. Dive Support. Marine Research. Hydrographic. ROV Support. SAR

26m Workboat Multicat for Sale

ID: 1100077

This is an extremely versatile “multi-­category” vessel. Offering shallow draft, deck crane, spud legs and substantial deck space and load capacity, ideally suited to diving, construction, dredging support duties, salvage, and survey work. Modified in UK in 2013. Deck cargo: 100 ton. Spud Legs: 2 x 12 m. Winches: 10T Triple Drum. Deck Crane (120Tm): 15,000Kg, 7.3m 4,650kg, 19.5m. Next SS: October 2023.

17m Multicat For Sale

ID: 4550

Hull Material: Steel. Flag: United Kingdom Class Society and Notation: MCS fit for purpose. Bollard Pull: 4.50 tons. Total power output: 710 bhp. Main Engine: 2 x Baudouin 6 M16 (2018). Speed cruising: 7 knots. Fuel: 8000L. Water: 1000L. Deck crane: Hiab 102-4 (3,700kg @ 2.8m).

24m Workboat For Sale

ID: 4534

Available in July 2023. Hull Material: Aluminum. Flag: France. Class Society and Notation: Local French. Main Engine: 2 x Volvo Penta TAMD 165. Passenger: 12 Pax. Category: 3. 1 Crane Guerra 12 t.m. Deck Area: 110m2. 1 hydraulic winch 1 t. Max Load: 18 t.

17.30m Workboat For Sale

ID: 4533

Available in January 2024. Flag: France. Class Society and Notation: Local French. Main Engine: 1 x John Deere 6090 AFM85 2022. Bollard Pull: 1.5t. Cruising Speed: 10 knots. Crane: Palfinger 14 T/m

23.84m Workboat For Sale

ID: 4530

Built: 1981, Greece. Hull Material: Steel. Flag: Malta. Class Society and Notation: Local Class. Next DD: June 2024. Total power output: 780 bhp. Main Engine: 1 x Caterpillar 3412 V12. The boat is in reported to be in full working order. The boat was last docked in 2021. It had a new engine fitted in June 2022. Engine rated from 739 bhp to 780 bhp @ 1900 rpm (manufactured 2004 and fitted on board in 2022). Engine hours at the time of installation on board: 739 hours. Deck space 90.85 m2. Cargo hold 72.95 m2. Deck crane presently on board does not belong to the ship but to current Charterers. Owners will replace it with a Guerra 8 ton reach 13 meters length upon delivery. Night accommodation: 8 persons.

12.9m Workboat For Sale

ID: 4523

Hull material: Steel. Flag: Taiwan. Main Engines: 2 x Cummins 6 BTA5.9M. Speed maximum: 8 knots. Speed cruising: 7 knots. She had CR class but no longer maintained. The notation is “Coastal service” 30NM from the coast. Class currently suspended but can be reinstated. She can carry 6 pax. It was dry-docked in 2021. Passengers 6. Crew 2.

14.75m Workboat For Sale

ID: 4515

The ship has been out of service since 2021. The aim was to convert the ship so that it could be used for private purposes. As a result, the deck layout has changed a bit. This also means that all the radio equipment required for commercial use is no longer on the ship. Vessel is now on dry dock / winterized. Sea trials are possible but prior notice is required. Former survey boat, converted for private use. As part of the conversion work, the seating area was renewed and survey equipment removed. A working toilet, as well as a sink and a small kitchenette are available. It is also possible to spend the night on the boat. Hull Material: Glass Fiber. Main Engine: 2 x Volvo Penta TAND 71 A.

Versatile 15m Research Vessel for sale or long term charter

ID: 3481

Versatile 15m Research Vessel built 2002 by Qualicraft in New Zealand of strip plank timber with triaxial E-glass. Powered by twin Caterpillar 3126 marine diesel engines developing 420 hp each and coupled to ZF 286A gearboxes, driving four blade propellers, which provide a service speed of 18 knots and maximum of 24 knots. Currently in Maritime New Zealand survey from East Cape to North Cape, including the Three Kings islands, she could easily be re-purposed and would make an excellent dive charter vessel or a great syndicate boat for enjoying the great outdoors, diving and fishing coastal islands and chasing game fish out wide.

18m Workboat For Sale

ID: 4485

Built: 2012, Egypt. Built under BV supervision. Latest dry dock January 2023. Two sister ships are available to choose from. Hull Material: Steel. Flag: Egypt. Class Society and Notation: Local Egyptian Class. Total power output (BHP): 800 bhp. Main Engine(s) (make, type): 2 x Doosan L125 TIM. Main Propulsion System: Twin Screw. Maximum Speed: 10 knots. Cruising Speed: 9 knots. Deck Cargo: 20 ton. Clear Deck Space: 25 m2. Deck Strength: 2 tons/m2. Towing Hook 12 Tons Hydraulic Deck Crane2 tons. Seats 6 persons. 4 x 2 Berth 8 persons Certified to carry.

17m Catamaran Workboat

ID: 4459

This vessel was specifically designed as a submarine carrier with moon pool between the hulls, mainly for lifting/deploying and transporting research submersible vehicles. She has been regularly used as a bathymetric survey vessel and support vessel for manned submersible missions , as well as a platform for the necessary maintenance work on the sub..

26m Workboat Multicat For Charter

ID: 1082

Built: 2003, The Netherlands. Hull material: Steel. Flag: United Kingdom. Class Society and Notation: BV Tug Unrest. Nav. Total power output (BHP): 2300 bhp. Main Engine(s) (make ,type): 3 x Cummins KTA19¬M3. Main Propulsion System: Triple screw. Propellers: 3 Speed cruising: 10.5 knots. Bollard pull: 29.5 tonnes. 70t/m and I 50t/m Effer hydraulic long reach cranes, capacity 13.5 tonnes at 11.6 m reach and 6.2 tonnes at 11.6 m with winch respectively. Towing winch 500 m x 36 mm diameter wire, 30 tonnes pull. Tugger winch, 100 x 18 mm diameter wire, 8 tonne pull. Anchor handling winch 100 m x 50 mm diameter wire, 80 tonnes pull, I50 tonne bow roller, 2 towing hooks 15 and 30 tonnes, survey facilities protected by u.p.s system, 1000 mm moon pool, hydraulic 360 degree bow thruster, 325 bhp. Capstan, towing and anchor handling equipment. Comfortable air conditioned accommodation for 5 people in 3 cabins.

11.6m Workboat For Sale & Charter

ID: 4446

Built: 2017, United Kingdom. Aluminium. Flag: United Kingdom. Class Society and Notation: MCA Cat 3 – 20 nm offshore. Total power output: 986 bhp. 2x Cummins QSC. 2x NamJet Traktor Water Jet. Speed maximum: 30 knots, Speed cruising: 17 knots. Condition is good and she is in use. Last DD March 2022. She was out of the water in Feb 2023 for a hull clean. Bollard Pull (Approx.): 4.000 Kg. Payload (Approx.): 4.500 Kg. Accommodation: Coded for: 9 passengers. Deck space: 8 sq m

10.10m Catamaran Workboat For Sale

ID: 4366

The vessel has been designed and built to be as versatile as possible and capable of multi role operations from harbour workboat to coastal survey operations. Integrated winches, tilting a-frame, side pole mount, davit and WASSP multibeam sonar coupled to 31m3 working deck area defy the vessel's length and commercially continuously rated machinery ensure low operational costs and maximum reliability. Lightship Displacement 15.63T. Maximum Displacement 21.2T. Deadweight 5.57T. Cargo Area 31m2. Deck Load 1.5T/m2 - Crew 2. Industrial Personnel 12.

16m Multicat For Sale

ID: 4362

Ideal multicat for reduced depth of water and working in area with restricted air draft (low bridges). Only one metre draft and four metre airdraft. Deck Crane Palfinger PK33, 2x4.5t Deck Winches, Towing Hook, 3 * 300MM SPUD wells, 2 x 14m SPUDS

9.25 m Multipirpose Work Boat For Sale

ID: 4368

The boat is very robustly built to cope with the rigors of work boat operations and is fitted with powerful engine. The wheelhouse is fully enclosed and contains the main console and navigation and communication equipment, chart table. She is flying Georgian flag.

31.4m Aluminium Workboat

ID: 4320

Built: Neuville Boat Works, USA 1988. Flag: Belize. Class: Novel (Cyprus Bureau of Shipping). 3x Detroit Diesel Marine Main Engines: 12v92ta Total: 1,500 Hp.

26.7m Multicat For Sale & Charter

ID: 1136117

She is an extremely versatile ‘multi­category’ vessel. Offering shallow draft, deck crane, spud legs, and substantial deck space, it is ideally suited to diving, construction, dredging support duties, salvage, and survey work

65ft Multi-purpose Tug / Workboat.

ID: 1700

The Sammy G is a conventional twin screw multi-purpose tow and workboat. Large aft deck with tow and line winch. Suitable for towing, anchor handling, crew and materials deliveries and general service work. The Sammy G is also equipped with a hydraulically operated “A-Frame.

37.5m Offshore - Multipurpose Vessel For Charter

ID: 3443

Built: 2015, Netherlands. Flag: Vanuatu. Class Society and Notation: RINA Offshore Supply Support. Next DD: February 2023, Next SS: April 2025, Next Annual Survey: July 2021. Total power output: 1950 bhp. 3 x Cummins K19DM. Speed cruising: 9.8 knots. Deck Area 105m2. Bow thruster 90 kW Electric. DeckCrane 1 x SWL1200kgs. Cabins: 6 x 1 persons, 2 x 4 persons.

55' R.E. Derecktor for Charter Only

ID: 4185

Aluminum. Work Deck Dimensions: 9ft x 14ft. Cargo Capacity: 2 long tons. Range: 400 NM @ 10 knots cruise speed. 6 passengers, Berthing for 4 passengers. AC. 2 Detroit Diesel 12V71TI 540 HP each. Crane. A compliment salvage and dive equipment available upon request.

15.25m Workboat For Sale

ID: 3320

Built: 1972, The Netherlands. Flag: United Kingdom. Class Society and Notation: Local Mecal Cat 2 - 60 nm. Next DD: May 2021, Next SS: May 2021. Total power output: 425 bhp. Main Engine: 1 x GMT Detroit Diesel 12v71. Fixed 3 blade. Speed maximum: 10 knots. Rebuilt 1995. Upgraded 2010/2019. Reconditioned engine fitted in 2012. Bollard pull: 7t. Deck: Pushbow, towing post & hook. Basic galley & overnight accommodation for 2-3 crew. Passengers: 12 + 2 crew.

28m Workboat For Sale

ID: 3955

Built: 2012, Australia, Flag: Australia. Class Society and Notation: ABS+A1(E) Towing Vessel, +AMS. Next SS: November 2022. Total power output: 750 bhp. 2 x Caterpillar C32 ACERT. Twin screw. Speed cruising: 10 knots. She is currently on charter until September 2022. Owners also sell a sister ship located Singapore that needs Class renewal. The main difference with this Ship is that the one in Singapore is powered 2x Caterpillar 3412C engines with 2x Caterpillar 3406C generators. Total horsepower is 1440bhp. And it has no towing pin. Bollard Pull 19 tons

Transportable Mini-tug / MP Workboat

ID: 3909

Based on a slightly smaller model we used to offer out of our Ukrainian shipyard, the MT650 is a new design that we now produce in Europe. It is a strong tug and push boat specifically designed for easy transportation : the operator can use her power, deck space and flexibility on any job around the world, and simply pack her on a truck or ship when the job is done. The strong hull, large fendering and good bollard pull make this tug suitable even for demanding applications. Hull shape, hydraulic steering and large rudder area give a comfortable ride and excellent manoeuvrability. Her size and open layout make for easy access to the water or to other craft for towing or pushing. The half open wheelhouse gives good weather protection and excellent vision from pilot’s position. Easy to operate, good sailing behavior and a good bollard pull , all in a small tug. This boat can be deployed just about anywhere around the world. The compact size and shallow draft make this vessel easily hoistable and transportable on a truck, which means fast deployment even at the remotest of locations. She also fits a standard 40’ High Cube container for overseas transportation. On the same design we can also produce 6.9mt and 7.9mt models (fully transportable).

NEW BUILD - 40m Utility Vessel

ID: 3694

Main Engine: 2 x 1030HP/ 759kW 1406 RPM - Mitsubishi S6R2-T2MTK3L. Free Deck Space: 221 (22.20m x 9.97m). Bow Thruster: 170 kW Marelli Motori/ Italy. Speed: 13 Knots (est.). Accommodation: 40 persons

NEW BUILD - Multipurpose Workboats

ID: 1360

Sea VIZion Series is a family of small workboats, specifically designed to offer safety, functionality and durability even in extreme working conditions. Common features include deep V hull shape for maximum stability, non-slip deck, double bottom hull and 5 watertight sections of tubes filled with polystyrene foam for safety. They offer huge deck area, a lot of space and storage, elevated foredeck and push-up bow for functionality. Construction is UV resistant HDPE 100 sheets from Röchling®, state of art hand welding and structurally integrated all-around fenders for durability. They are available in 3 sizes: SEA VIZION R685 - Length Overall 6.85 m; SEA VIZION R585 - Length Overall 5.85 m; SEA VIZION R485 - Length Overall 4.85 m.

NEW BUILD - 15.5m Catamaran Workboat

ID: 3621

IZ 1550 Fish Farm Steel Boat provides excellent maneuverability and high performance even in rough sea conditions due to its catamaran hull structure and its highly sophisticated balance distribution. IZ 1550 Fish Farm Steel Boat has proved to be very durable, safe and useful for fish farm support activities. IZ 1550 is a multifunctional boat for fish farms, offshore activities, commercial diving and thanks to its large deck working area it can also be customized to owners's requirements such as ocean cleaning, fire fighting, deck crane operations and marine constructions.

23.35m Shoalbuster For Charter

ID: 3472

Built: 2006, The Netherlands. Steel. Flag: The Netherlands. Class Society and Notation: BV Tug Unrestric. Nav. Next DD: April 2021, Next SS: April 2021. Total power output: 1720 bhp. Main Engines: 2 x Caterpillar 3412 D. 2 x Promarin fixed pitch propellors. Speed maximum: 10.5 knots. Both main engines completely overhauled in July 2018 at 30790 hours, after this the counter was reset. Hours: PS ME: 5357 - SB ME: 5363, C9 (Hydraulic unit) 20191. Bollard pull: 22 ton (m). Moonpool: Build in bow for clear view with echosounder 600 x 400mm. Anchor handling winch: Ridderinkhof, 30 ton @ 6 m/min. Deck crane: HS Marine 80 T/m 4SL , 4.4 ton @ 15,5 m. Towing winch: Ridderinkhof , 30 ton @ 6 m/min. Maximum deckload: 10 ton/ m2. A-Frame : 25 ton SWL A-frame. Container capacity : 2x 20”. Heated and aircondioned living spaces for five persons, consisting of a captain’s cabin , a C.E. cabin ,one single crew cabins, one double crew cabin, a galley and sanitary facilities.

34.5m Crane Barge for Charter

ID: 3452

Flag: Malta. Class Society and Notation: Local 12 nm offshore. Next DD: January 2022. Next SS: January 2022. Total power output: 1046 bhp. Main Engines: 2 x General Motors Detroit Diesel. Twin screw. Speed maximum: 7.5 knots, Speed cruising: 7 knots. Deck Area: 233.6 m2. Subject to Project, Owners can prepare it for unrestricted navigation. Major Overhaul in 2017, including generator, crane, ballasts, engine room, deck, cabin, dry dock. Basic Function Grab Dredging; Working Ship-to Ship; Ship to Barge; Ship to Quay, Deck cargo, RoRO Cargo for crane operations, Transporting-transhipment at sea, coastal or inland. Deck Load 200 tons. Anchor Mooring Winch. Capstan. Deck Crane. Craft Boat / Working Boat. Crew: 4.

17.61m Multicat Workboat for Sale or Charter

ID: 1138019

Built in Germany. Flag:  The Netherlands. 500 bhp. 2 x GM 8v71. Twin screw. 7 knots. Deck Area (m²):  75 m². Refitted:  2013. Deck load: 5 ton per m2, 60 tonnes.

19.85m Agency / Service Boat

ID: 3424

Flag: Bulgaria. Agency / Service Boat. Built: 2001 in Turkey. M/E: MAN 325 BHP V 10. Service speed: 7 knots. Cargo on deck - about 30 ts. Clean deck cargo area - about 29 m2. Cargo deck area dimensions 5 x 5 m. Total of 12 pax including crew. 1 x Crane Single Boom SWL1.0 t. range 3.50 m. above main deck height 3.80 m.

NEW BUILD - 5m Alloy Tube Workboat.

ID: 1438

Looking for a sturdy platform to do a bit of diving from? Available now is a new build out of Bali that is a 5.25m aluminium pontoon dingy that can carry 6 persons with dive gear. Recommended power a single OBM 40 – 80 HP max. Build time 45 days.

NEW BUILD - 10.3m Multi-Purpose Cat Landing Craft

ID: 3385

Designed by the renowned designer Rick Welin (Canada) this very versatile workboat can handle serious loads for her size. Whether you need a Landing Craft, Dive Boat, Recovery Platform, Fish-Farm Tender, Portable Work Platform, Crew Boat, or ALL of the above, she can handle the job. This is a "Do Anything" coastal worker, and she's trailerable. Designed to Lloyd's Registry Small Craft Scantlings rules for workboats she'll pass muster in any workboat category. The through-deck Moon-Pool allows her to hover above underwater loads for lifting at her center of flotation which allows a lifting capacity beyond that of any deck-mounted Hiab type of configuration. (NOTE: She can be built without the moon-pool as well). Other cabin sizes and configurations can be created as modifications to suit the owner needs. You may need an open deck with center console, or a small hardtop for instance. Or a larger cabin for crew-boat or water-taxi type of operations. 6mm bottom plating with beaching plates means never having to worry about landing on gravel shorelines, and her twin hulls mean you can ground her on any tidal flat and she'll sit level to provide versatility. Catamaran hulls lend themselves to beached stability beyond any mono-hull Landing Craft. Outboard power allows for a range of powering options depending on budget or speed requirements and affords the busy commercial operator the ability to upgrade or re-power at any time without significant downtime.

20.76m Workboat for Sale

ID: 3331

Modular Eurocarrier, Multi-Purpose Vessel. Basic Functions: Pushing, Mooring, Anchor Handling, Towing and Survey. Bureau Veritas I + Hull • Mach Special Service / Workboat Coastal Area. Speed: 6.8 Knots (Approx.). Bollard Pull: 5.1 Tons. Main Engines: 3x Scania Di 12 70 M. Total Power: 771 Kw At 1800 Rpm. Winch. Deck Crane. Towing Hook. A-Frame. Pushbow. 4 Point Mooring

33.18m Multicat For Charter

ID: 3241

Built: 2019, The Netherlands. Flag: United Kingdom. Class Society and Notation: BV Unrestricted. Next DD: October 2024. Next SS: October 2024. Next Annual Survey: October 2022. Total Power Output: 1287 Bhp. Main Engines: 2x Rolls Royce US105 P6 FP. Main Propulsion System: Twin Screw. Speed Cruising: 10 Knots. Bollard Pull: 43.3 Ton(M). Forward Thrusters Fixed 2x Rolls Royce Us105 P6 Fp. Aft Thrusters Swing Type 2x Rolls Royce Tcns 073 Fp. Stern Tunnel Thruster 1x Veth, Type Vt-400 400kw. Total Propulsion Power 2560 Kw (3481 Hp). Drives And E-Motors Vacon And Marelli Motori. Anchor: 2 X 430 Kg Pool Tw (Hhp). Anchor Winch: Dmt, Hydraulically Driven. Deck Crane Fore: Hs Marine Akc 370 / 21 He3 24 Ton(M) @ 10m, 9 Ton (M) @ 21 M. Winch on Crane: 11 Ton Single Fall. Deck Crane: Aft Hs Marine Akc 550 / 20 He3 33.5 Ton(M) @ 10.5m, 15 Ton(M) @ 20 M. Winch on Crane: 11 Ton Single Fall. Capstan: Electrically Driven 5 Ton @ 12 M/Min. AHT Winch: Dmt Ahtw-H1500. Anchor Handling: 150 Ton @ 4 M/Min 200 Ton Brake Holding Power Towing 55 Ton @ 10 M/Min 125 Ton.

36.02m Multipurpose Vessel For Charter

ID: 3223

Built: 1993, Sweden. Aluminum. Flag: Spain. Class Society and Notation: Local Spanish T (Sea Going). 845 bhp. 2 x Scania DSI 11 61 M41V. Twin screw. 10 knots. Multipurpose pollution control vessel to DnV Oil-Rec specification, fire fighting vessel, tanker 150t, tug and Diving and survey vessel. Bollard Pull: 9 tons. Air draft: 16.4 meters. Cargo capacity: 150 tons of recovered oil. Four coiled cargo tanks heated by a Clayton EO16 steam generator. Tank capacities 60+50+21+21 tons. 1 x Hiab Foco Sea Crane 110 Towing hook and capstans on aft deck. Anchor winches with two anchors and a spare anchor. Heated and air conditioned for up to 8 persons in 4 cabins.

16.43m Workboat For Sale & Charter

ID: 3222

Built: 1984, Italy. Flag: Lebanon. Class Society and Notation: IRS ISE RC Tugboat. Total power output: 280 bhp. 1 x Fiat AIFO-828 M. Last DD: February 2020. Class new: 2020. Reconditioned Lebanon: 2014.

27.76m Multipurpose Vessel For Sale & Charter

ID: 3209

Built: 2003, Philippines. Aluminum. Flag: Panama. Class Society and Notation: Local Panama Offshore Support. Next DD: January 2021. Next SS: May 2023. Next Annual Survey: May 2021. 1474 bhp. 2 x Cummins KTA 19 M4. Speed maximum: 22 knots, Speed cruising: 15 knots. Built to Lloyds Register Class. 2 x fixed pitch propellers 3 blade. Slipway and hydraulic operated stern gate for FRC deployment and retrieval. Hydraulic operated cape stand. Boarding gates on ps and stb bulwark and dive platform. Modern navigational aids on board. Vessel is equipped for GMDSS A2

27.7m Multicat For Charter

ID: 3206

Built: 2017, The Netherlands. Flag: The Netherlands. Nav. Next SS: March 2022. Total power output: 2435 bhp. 2 x Caterpillar C32 TTA ACERT. Twin Screw. Speed cruising: 10 knots. Deck crane foreward: HS Marine AKC 290 LHE3 11,5 T @ 16,5 m. Deck crane aft: HS Marine AKC 290 LHE3 11,5 T @ 16,5 m. Forward winch: 100 Ton pull - 150 ton Holding power. Aft winch: 50 Ton pull - 100 ton Holding power. Tuggerwinch: Dromec 12 ton. Maximum deckload: 10 ton/m2. Free deck space: 150 m2. A-Frame : 25T SWL Container capacity : 4x 20” and 2x 10”.

39m Multicat for Sale

ID: 3125

Built: 1997, Turkey. Total power output: 800 bhp. 2 x Volvo Penta. Twin Screw. Speed cruising: 8.5 knots. The Multi-cat is a conversion from a Ferry boat. Owners confirmed it’s been renewed 95%, including hull. Main engine was reconditioned (built 2001, reconditioned 2020. 0 running hours). One generator is 145 KWA Katana and is new, The other is 220 KWA and reconditioned (0 running hours). Navigation equipment is new. All furniture is new. Propellers and shafts are new. Deck cranes (Palfinger) are 2nd hand. Bow roller is new, 2.0 m width, diameter 800 mm - SWL 180 ton. Deck winch (Gürdesan) is new (40tonnes/m). Bow thruster is new, 1 x 90 kw. Deck load Abt 200 ton. Deck area About 200 m2 - wooden covered. Bollard pull About 8 ton. Deck crane Telescopic Knuckle Crane (Brand New) (Remote Controlled) 7.5 ton @ 18.5 m outreach / 29 ton @ 3.4 m outreach. Deck crane Palfinger PK23500 M 10 ton / m (2nd hand). Anchor Winch Hydraulic - 26mmm -200m chain - 200 kg anchor. It has 6 cabins and 10 berths, 2 living rooms, a galley, 1 wc and 1 bathroom. Air-conditioned Wheelhouse

27.3m Live Aboard Vessel

ID: 1418

Built: 1970, Netherlands. Hull material: steel. Flag: Netherlands. Class Society and Notation: Local Area 2, 3, 4 in NL. Next DD: April 2024. Next SS: April 2024. Next Annual Survey: April 2024. Total power output: 425 bhp. Main Engine: 1 x Caterpillar 353 D built in 1986. Main Propulsion System: Single Screw. Propellers: 4. Speed maximum: 11 knots. Speed cruising: 9.5 knots. Berths 10 in 4 cabins: 3 x 2 / 1 x 4

81m Offshore - Multipurpose Vessel For Charter

ID: 1777

Flag: Belgium. Class Society and Notation: Lloyds Register Sea Going. Next DD: May 2022, Next SS: May 2022. Total power output: 1970 bhp. Main Propulsion System: 2 Azimuth Thrusters. DP Multipurpose Vessel. Carrying capacity Deepsea 2,200 T, Coastal Waters 2,500 T. Stone carrying capacity Deepsea 1,520 T, Coastal Waters 1,850 T. Working deck 22.0 x 57.0 m. Deck load 10 T/m2. Stone loading boxes Dimension 4 pieces 9.70 x 15.00m. 1 bowthruster 368 kW  1 bowthruster 735 kW. Mooring system 4 x 500 m. Max Pulling power 40 T, Max Holding power 75 T. Dynamic positioning Kongsberg KPOS11 DP system. Accommodation 10 single berths. Removable Forecastle deck 12.6 m. Spuds 2 spuds of 28 m.

41.5m Multicat for Charter

ID: 1233

Built: 1996, The Netherlands. Flag: Netherlands. Class Society and Notation: BV Unr. Nav. Total power output: 2200 bhp. Main Engine: 2 x Caterpillar 3508. Main Propulsion System: Twin screw. Propellers: 2. Speed cruising: 11 knots. Deck Area: 430 m2. Last BV dry dock Survey: 2016. Last dry dock for maintenance: October 2018. Propellors: 2 x 1400mm 4 blade fixed pitch in nozzles Bowthruster: Detroit diesel 145 bkw. ACCOMMODATION: Heated and airconditioned living space for 14 persons, consisting of seven twin cabins, a galley/mess with satellite TV and sanitary facilities. DECK Working deck: 430 m2 clear working space Hydraulic crane front: Heila HLRM 240-2SL - 240tm. Hydraulic crane aft: Effer - 120tm Towing winch: 2 x 50 Tonne Haugglunds Tugger winch: 10 Tonne. Bow roller: 7.8m length x 1.0m diameter. Secure locked steel ramp system for (un)loading heavy.

Blyth 10m Catamaran

ID: 1569

Make: Prout Blyth Catamaran. Authorization / Approval: Certificate of seaworthiness (Valid until 22/06/2021). Engine 1, port side: Perkins Sabre M225TI, 1995, Motor hours: 2396 hours. Engine 2, starboard side: Perkins Sabre M225TI, 1995, Motor hours: 2294 hours. Layout: In hulls: each hull has a cabin with double bed + several cabinets. Port hull has also toilet + shower, Starboard hull has a technical compartment (water pump, water boiler, Hydraulic oil reservoir), electrical converter + storage for tools and spare parts. Cabin: table with seating for 4 convertibles to double bed. Pilot seat, kitchen with fridge and microwave and two burners.

66.6m Maintenance Work Vessel

ID: 1387

Basic function Maintenance / Work Vessel. Classification: Bureau Veritas. Notation: BVI. Special Service Maintenance/ Work Vessel, Unrestricted Navigation. Descriptive note Self Propelled Accommodation Vessel, SPS 2006. Gross tonnage 2676 Ton (Approx.). Endurance ABT. 35 days. Deadweight 1996.7T. Free running speed: 12 KNOTS F.O. Cons Max Speed ABT. 16T/day. Main Engine: 2X Cummins KTA50-M2, 1600bhp at 1800rpm, 1193kW with Gearbox ratio 5:05:1. Offshore Pedestal. Crane 1X 25 Ton Lifting Capacity, Hydraulic Outreach API2C.red6 compliant. Crane SWL. 25Ton 20m Outreach. 5 Ton 43m Outreach. 4 point Mooring. Berths: One (1) men Room x 4. Two (2) men Room x 4. Four (4) men Room x 22. Berths total: 100 Men. Recreation Room, Prayer Room, Gym Room, Meeting Room, Officer Room and Medical Room.

26.5m Work Boat For Sale & Charter.

ID: 1964

.Built (year and place): 1992 United States of America. Hull Material: Aluminium. Flag: Italy. Class Society and Notation: RINA Coastal Waters. Total Power output: 874 bhp. Main Engine: 2 x Caterpillar 3406. Main Propulsion System: Twin Screw. Speed cruising: 12 knots. Deck Area (m2): 65m2

NEW BUILD - Centurion 24 General Purpose Workboat

ID: 1413

The Centurion 24 is our latest model workboat powered by the new ISUZU 197hp Inboard diesel engine. Capable of carrying 12 crews or equipment and having a top speed of 18 knots. This boat is a work horse suited for working under tough conditions. The Centurion 24 is constructed with double hull bottom, foam filled, with self-baling cockpit, with huge 6” D-fendering system, making it ideal for work inshore and offshore.

17m General Service Workboat Available for Sale & Charter.

ID: 2196

This new, compact and powerful workboat has been designed by Macduff Ship Design Ltd (Scotland) and is outfitted for a number of harbor duties : towing, berthing, fire-fighting operations.  Classified by BV (Class Notation I, +Hull, *Mach, Launch) this workboat has a bollard pull of 10T. and 12 knots service speed. Complete e very comfortable accommodation for 4 crew members.

NEW BUILD - M Range 18

ID: 4002

Meet the M18, our latest and most robust workboat we have designed. Already in build, the M18 promises to outperform any of its Meercat predecessors. Specifically designed to carry large amounts of cargo and our best bollard pull to date. As with all our vessels in the M Range the M18 is a monohull and is a workhorse for those needing more from their workboats. The standard M18 comes as a completely new design and is based on the requirements of the users requiring a heavy duty workboat. This vessel can offer accommodation or a workshop in the main structure and the wheelhouse offers great all round visibility to its surrounding area and the deck. This vessel has an extremely stable working platform for a multitude of tasks. With the newly designed wheelhouse and superstructure it offers that little bit more for the crew on board, including accommodation if required. Whilst the largest in our M range, Meercat Workboats can build you a bespoke vessel up to 24 meters in our purpose built workshops in Hythe Southampton. Drop the team a line to enquire as to how we can tailor any of our vessels to suit your exact requirements.

NEW BUILD - M Range 15

ID: 4001

High build quality, cost effective. Designed and build in the UK  Greater Bollard pull. Increased cargo capacity. Bespoke flexibility on each model. Highly versatile across a wide range of applications. UK MCA Workboat code of practice – Category 3 as standard. Our new innovative M range workboats with increased cargo carrying capability offering superb performance at an affordable price. Our newest range of Workboats, the M Range has been designed for those that require greater capacity to that of our road transportable versions. Our latest vessels are monohulls and have increased bollard pull, larger cargo capacity and are capable of carrying more liquid cargo. Whilst the standard sizes of the range are from 14 to 18 meters, Meercat Workboats can build this vessel type to your requirements up to 24 meters at our custom built workshops in Hythe, Southampton.  The standard M15 is a single hulled vessel, whilst being very similar in looks to its sister RT15 model, the M15 is capable of doing that little bit more. The new wheelhouse design allows for greater all round visibility and more room inside.  Just like its sister RT Range the M range Meercats can be designed around your specific requirements to ensure it is perfect for the job you intend it to be used for. As each boat is set up to suit the needs of you the customer, it would be fair to say that no two Meercats are the same.  The M15 provides an extremely stable work platform and is ideal for carrying cargo and working in a multitude of environments such as general construction works, harbour maintenance duties, fish farm support and pollution control, to name but a few. Meercat workboats have many examples of the wide array of tasks the vessels have been put to work on; look on the website for more examples.

New Build - Centurion 25 Pilothouse Mini Tug.

ID: 1998

The Centurion 25 Pilot house Minitug is our latest upgraded design of the Centurion 25 Minitug incorporating a Pilothouse at the bow for working in different weather conditions. The boat is constructed tough and strong with a static bollard pull of almost 2000kg. Constructed with multiple chambers, foam filled construction with self-draining cockpit, this boat provides safety for crews working in open waters. Boat is suitable for use as a mooring boat, small tug or pusher, pulling oil booms, or even as a general-purpose workboat.

NEW BUILD - M Range 14

ID: 3096

The M Range is the new range of vessels at Meercat Workboats. The M14 is the most compact range of our fleet, designed for those who require a smaller workboat, shallow draft and a road transportable monohull.  The M14 is a tough workboat designed for working in the hardiest of conditions and is highly versatile across a wide range of applications, each vessel can be adapted to your specific requirements.

NEW BUILD - 18m Catamaran Workboat RT18

ID: 3026

The RT range of vessels at Meercat Workboats are our Road transportable varieties, ranging from 14 to 18metres as standard with an ability to extend to 22metres built in our new facilities in Hythe, Southampton.  The standard 18metre is a twin hulled vessel, with the options to add additional hulls to extend the beam and deck area. The increased beam offers a significant increase in crane lifting, cargo capacity, whilst still maintaining its shallow draft, manoeuvrability and ability to be road transportable.

NEW BUILD - Meercat RT15

ID: 3037

A road transportable, twin or triple hull vessel, offering versatility without compromise. The Meercat RT15 is the most popular design to date. Striking a superb balance between length and beam, the RT15’s twin 3m wide hulls can be easily transported by road to any destination at a moment’s notice. The generous working platform lends itself to a multitude of workboat applications. Each vessel can be tailored to the operator’s need through the wide choice of deck configurations and equipment we offer.  From bow thrusters and liquid cargo transfer systems to moon pools and air compressors, there are options to suit every need. Standard equipment for the RT15 includes a 23.5 metre deck crane, a 21 kVA generator and deck winch. We can now offer 4 metre wide hulls (8m overall beam) with a corresponding increase in deadweight capacity. All multihull Meercats can be supplied with a third, middle hull to further increase capacity and functionality.

26m Multipurpose Workboat

ID: 1147482

Built 2007, NETHERLANDS. Flag:  NETHERLANDS. Class:  BV Utility Vessel. 2400 bhp. 3 x Cummins KTA 38MO. Triple screw. Speed cruising: 10 knots. Deck Area (m²): 160 m². Bollard Pull: 33 tons. Comfortable heated and air-conditioned accommodation for 6 persons, in 3 cabins, galley, sanitary facilities, etc. Seating for 12 day passengers.

22m Multicat available for Sale and Charter

ID: 1195126

22m Multicat available for Sale and Charter. 2 spud legs of 12m. Deck crane. Forward winch. Plough with A frame. Stern winch. 550 BHP with propeller in nozzle. Retractable bow thruster. Bollard pull: About 7.5 tons. Sailing area: Full European up to 20 miles from a safe haven. Full cover H&M, P&I, LoH, Crew insurance.

28m Shallow Draft Workboat

ID: 1128561

This 28m Workboat is designed for inland, harbor and coastal operation such as towing, pushing, anchor handling, hoisting, transport of heavy deck load, dredge supply and assistance. Classed ABS+A1 (E) Towing vessel + AMS. Total deck space 110m2. Main Engines 2 x Caterpillar 3412C DITA 720 bhp@1800 rpm. Free Run Speed Approx.: 10 knots. Bollard Pull: 18 tons . 2 x Anchor Windlass . 2 x Crane: Towing Hook: Towing Hook 30 ton WLL with hydraulic emergency release. Towing Winch . Towing Wire. A-Frame/Rollers: Class Approved Anchor Handling A-Frame. Rollers: Bow & Stern Rollers Fitted

NEW BUILD - 15.5m Versatile Workboat

ID: 620697

The VERSAWORKER 1606 is mainly developed for towing, pushing, anchor handling and general support. The large free deck area allows for transport of equipment and containers. The shallow draft and powerful propulsion make the VERSAWORKER 1606 a truly versatile workship. The flexibly mounted deckhouse comprises two double cabins and a sanitary space. A small pantry is incorporated in the wheelhouse. Class: Bureau Veritas I + HULL + MACH, TUG, Coastal Area,

24m Multipurpose Workboat / Tug For Charter

ID: 662581

Built 2012, Netherlands. Bureau Veritas l HULL-MACH Tug. Unrestricted Navigation AUT-UMS. Nat. Authorities MCA workboat class 1 @ 150 nm from safe haven. Last DD - Next DD January 2014 - January 2017. Next SS: January 2017. Next Annual Survey: April 2016. Bollard Pull (certified): 53.4 tons. Bollard Pull Astern: 35.0 tons. Total power output (HP): 3820 hp. 2 x Caterpillar 3512 B TA. 2 x F.P.P. in nozzles 2400mm. Bow Thruster: 2 x Kalkman 257kW in pushbows. Rudders: 2 x Independent fishtail 45 degrees. Speed (cruising – maximum): 9.5 – 10.6 knots. Total cabins: 4, Seats for passengers/crew: 8. Comfortable heated and air-conditioned accommodation, galley, sanitary facilities, etc. Deck Cargo: approx. 100 tons with half tanks. Deck Area: about 180m². Deck Strength: 10t/m². Range at sea (nm): 3500nm. 2 x 200.000 4S / 10.5T @ 16m Deck Cranes. 50T pull, 125T brake / 700m x 48mm Towing winch. 100T pull, 150T brake / 150m x 48mm Anchor handling. 4 x 13T pull / 200m x 22mm + 19mm ground chain. Mampaey 45T Towing hook.