19.85m Agency / Service Boat

ID: 3424

Flag: Bulgaria. Agency / Service Boat. Built: 2001 in Turkey. M/E: MAN 325 BHP V 10. Service speed: 7 knots. Cargo on deck - about 30 ts. Clean deck cargo area - about 29 m2. Cargo deck area dimensions 5 x 5 m. Total of 12 pax including crew. 1 x Crane Single Boom SWL1.0 t. range 3.50 m. above main deck height 3.80 m.

12m Agency/Pilot Boat

ID: 3401

A well-kept polyester agency boat. Engine: 321HP MAN. Fuel Tanks: 2 x 750 litres. Bilge Tanks 100 litres. VHF. AIS

NEW BUILD - 14.8m Polyethylene Agent Boat

ID: 3400

Hull and cabin made of high-density polyethylene. Polyethylene is so elastic that the hull can absorb impacts of collisions even at high speed, this makes it a very safe hull material. Polyethylene not to be affected by corrosion so no painting needed. Double hull. Foam between hulls. Ant-slip surface on main deck. Insulated covering inside cabin. 2 x Cummins QSM11-610 main engines (610 hp each, 2300 rpm, 1500 hours annual, 78 lt/h fuel consumption at max). 28 knots maximum speed. Twin Shafts. Bow Thruster. Rest room for 2 crews. 1 + 1 + 12 seating capacity in cabin. Captain seat and crew seat have shock absorbers.

NEW BUILD - 9.95m Alloy Water Taxi / Tour Boat.

ID: 1270

This is offered as a kitset for any builder and we can also arrange a builder in a few locations. Passengers: 14, Crew: 1-2, Engines: 2x 300hp, Propulsion: Outboards. Survey / Class: NSCV 2C ( Australian ).

NEW BUILD - 11m Foil Assisted Power Cat

ID: 1404

This is a semi-asymmetrical, foil assisted catamaran  designed to offer economical cruising speeds of 24 -26 knots with twin 300hp outboards with up to 24 passengers on board. Designed by Noah Thompson (NZ), the boat is available in a variety of layouts to better address the needs of dive and tour operators. Foil-assistance permits a higher level of comfort and lower fuel consumption.   The NXT 35 SP is slightly bigger than the 35 DC but has similar characteristics : seaworthy hull, huge cockpit area, economy of operation and maintenance free construction. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 SP is characterized by excellent performance and good load carrying capacity. She is ideally suited for  the Mediterranean or tropical climates with open or enclosed sides, drop down clear screens and a layout fully customizable. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements.  The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.

NEW BUILD - High Speed Hydrofoil Motorboat

ID: 1184

With more than 60 years in activity and over 8,000 vessels launched, Alexeev’s Hydrofoil Design Bureau designs and manufactures hydrofoils, air-cavity vessels, hovercrafts, transport-amphibian platforms, ekranoplans. Besides commercial vessels this shipyard produces high performance pleasure boats which take advantage of the leading-edge technology and broad experience developed, vessels that combine top performance, passenger comfort and ease of use. SAGARIS has been specifically designed to offer exhilarating high speeds in a small and easily handed motorboat. Used as a tender for superyachts or as a day-boat this is a boat that will not pass unnoticed in any context. Top level performances are one of the main features of SAGARIS, but besides her technical characteristics this model has been designed to offer a very comfortable ride in an elegant and unique fashion. Her beautiful gull-wing doors lead to a passenger cabin where everything has been carefully selected to blend comfort, class and safety. Crew-centered design featuring intuitive controls designed with the captain in mind, designed to optimize handling, reduce crew workload, and maximize fuel efficiency. Economy and business classes are equipped with comfortable seats, modern air-conditioning system and more overhead baggage space per passenger. She has been engineered for up to 55 knots speed, and this is achieved with a single engine with sterndrive propulsion. Construction is a combination of light alloy for the hull with composite materials for the cabin and part of the deck. Foils are in stainless steel and incorporate an anti-collision system. For extra safety the boat has been designed with watertight bulkheads and buoyancy compartments to make her unsinkable. Each Sagaris is customized for the owner's size, color preferences, comfort options and personalization details, Sagaris begins a new era for hydrofoil boats in terms of speed, efficiency and performance.

NEW BUILD - Ally-gator 480 STD

ID: 2243

The AG 480 Standard is available as standard with a bow step or, upon request, with an extended bow plate, full deck, console at centre or starboard, bow stowage hatches and jump seat boxes. It is the preferred choice where flexibility and seating layout are required in a small boat. Accessories such as SeaDek or carpeting, folding canopy, stowage, bench or single seating and seat cushioning are optional.

NEW BUILD - 11m 43 pax Water Taxi

ID: 1522

Passengers: 43, Crew: 2. CLASS: IR Class ( India Register of shipping ). Main Engines: Suzuki - DF 250 A, 2 x 250 HP @ 6100 rpm. Speed: Light: 40 knots (100% MCR), Loaded: 33 knots (100% MCR)

NEW BUILD - 11m Diving / Fast Transfer / Power Cat

ID: 1398

Characterized by a seaworthy hull, huge cockpit area, economy of operation and maintenance free construction, the boat is designed and built to address the needs of dive and tour operators who want to offer the best to their clients. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 DC is characterized by excellent performance and good load carrying capacity. She is ideally suited for  the Mediterranean or tropical climates with drop down clear screens and the layout can be customized to suit your operation. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements.  The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.

Colnago 35 Crew Boat - Price Reduced!

ID: 1255

Built in 2018 and in "as new" conditions this is a tough boat of aluminum construction, suitable for a variety of different uses :,crew transfers, taxi, tourist services, offshore work, harbour work, etc.

NEW BUILD KITS - Alloy Vessels of All Types. Shipped Globally.

ID: 679331

Do you have a local yard that is capable of aluminium welding and vessel construction, but they don’t have the design you need, Or are you such a yard? We have a range of designs in the 10m to 40m plus range which that can be supplied in kitset form for you to build. Shipping costs to most parts of the world make the purchase of new builds too expensive for you to consider. The answer is our kitset, a complete package including a step-by-step building plan and fabricated units ready to be assembled. The whole kit will be shipped in containers and will include everything required to complete the vessel, including fittings, engines and all other equipment (if required). All you need is qualified aluminium welders and a construction site. Designed and fabricated in Australia or Singapore. If we don’t already have a design that fits your purpose, we will find one.

NEW BUILD - Vector Ribboat RIB 900-P

ID: 1209

Based in Ukraine Vector Ribboat is a very experienced builder of aluminum hull, rigid inflatable boats. They have an extensive catalog of models for both professional and recreational use that SeaBoats are proud to market all over the globe. The RIB 900-P model has been specifically developed for commercial operators who need a tough boat suitable for tourist services of various types. The standard layout can be customized and a variety of optional items (diving ladders, air-bottles racks, etc.) can be added to address any operational requirement.

NEW BUILD - Vector Ribboat RIB 1100 K

ID: 1053

Vector Ribboat is a very experienced builder of aluminium hull, rigid inflatable boats and the 1100 K is their largest model. It is a tough and practical cruising boat built to workboat standards. With a full cabin forward, separate toilet and a large flying bridge this boat offers plenty of room while retaining the ability to be easily trailered. This boat has CE Certification and can be equipped with a large list of options to better address any particular requirement.

NEW BUILD - 10m 34 pax Passenger Cat

ID: 2183

Passengers: 34, Crew: 2.

14m Fast Ferry

ID: 2124

Length Overall: 14m. Beam: 3.2m. Draft: 1.2m. Capacity: 45 Pax. Speed: 25 knots. Survey: NMSA

NEW BUILD - 10 Meter 30 Passenger Catamaran OBM

ID: 4083

Extremely useful 10m Cat with the capability to carry 30-31 passengers.

NEW BUILD - 10m Day Cruiser Catamaran

ID: 439466

10m – Day Cruising Catamaran. 10.00m x 4.20m x 0.60m. Fuel Capacity: 2x 250L. Water: 100L. Construction: GRP. 2x 250HP Outboard Motors. Speed Cruising: 30 Knots. Speed Sprint: 35 Knots. Passengers: 18, Crew: 2. Designed By: Mark Ellis Marine Design.

NEW BUILD - 10m Resort Taxi

ID: 439437

10m – 18 Passenger Resort Taxi. Hull: Catamaran Planning Hull. Construction: GRP. Main Engines: Option A: 2x 250HP Outboard Engines, Option B: 2x 250 HP Stern Drives, Option C: 2x 270 HP Conventional Drives, Option D: 2x 300 HP with Water Jets, Option E: 2x 300 HP with Surface Drives. Propulsion: Based on Option. Speed Cruising: 25 – 30 knots, Speed Sprint: 28 – 35 knots. Passenger: 18 – 25, Crew: 2. Designed By: Mark Ellis Marine Design.

NEW BUILD - 15m VIP Cat

ID: 588363

The vessel shall be constructed as a medium speed, sea kindly, VIP passenger service vessel for the use in Indian waters. The vessel shall be arranged as shown in the preliminary drawing. The Helm is arranged to allow all round vision. Boarding is effective by the provision of wide side decks and grab rails, allowing side, bow or stern loading. Entry to the passenger saloon is via rear, and a side mounted weatherproof doors.

NEW BUILD - 10m 23 PAX Ferry

ID: 432397

Built to Order 10m, 23 PAX Cat Ferry. 10.07m x 4.20m x 0.60m. Water: 100L. Catamaran Planning Hull. GRP. 2 x 300HP. Stern Drives. Cruising: 24 knots. Sprint: 26 knots. Passenger: 23. Crew: 2. Generator: Sole SA – 7GSC. Air Conditioner. Designed By Mark Ellis Marine Design in Australia.

NEW BUILD - Seaward Nelson 42

ID: 2026

A good number of Nelson 42 pilot boats and service launches are providing sterling service, day in and day out, around the world. They are noted for their exceptionally soft ride, excellent handling in difficult sea conditions and for their predictable handling during ship boarding. Robustly built, well-gendered and produced with maintainability in mind, they provide their operators with the ideal tool for this particularly demanding job. The Seaward Nelson 42 is available with a fixed or resiliently-mounted wheelhouse, with seating for 6 or 8 and a choice of forward or aft raked screens. Various engines options are available, providing operating speeds up to 25 knots. Seaward also builds a Service Launch version of the Nelson 42, ideal for coastal patrol and multi-role applications.

NEW BUILD - Blyth 14m Series

ID: 588088

Blyth Workcats are built entirely in the UK from one piece tooling for exceptional strength. All engineering and electronics are installed by in-house engineers and stainless steel fittings are custom made within their own fabrication workshop, offering a completely bespoke service to our clients.The company works closely with naval architects and surveyors of the highest professional standing and we take pride in our ability to construct vessels to meet or exceed the rigorous standards required for MCA Code of Practice, Seafish, Irish P5 and MCA P5&6.The original Blyth 33 has now become the Blyth 10m, evolving and improving with time and experience, making her performance second to none. In recent years, the company has developed 11, 12, and 14m catamarans with a wide selection of 14 Cats delievered to date.

NEW BUILD - Blyth 10m Series

ID: 587835

The original Blyth 33 has now become the Blyth 10m, evolving and improving with time and experience, making her performance second to none. In recent years, the company has developed 11, 12, and 14m catamarans and the introduction of the new Blyth 17 metre vessel continues to take the range from strength to strength, maintaining the company’s position as the leading supplier of bespoke catamaran-based workboats. The company recognizes the importance of continuous product development together with the improvement of management systems essential to support this and is proud to hold ISO 9001 accreditation.

NEW BUILD - Blyth 11m Series

ID: 588086

The Blyth 11m is available as both an asymmetric hull form and the Deep Vee planing hull form. The asymmetric has a fine forward section developing into a medium deadrise single chine form aft allowing the vessel to plane for high speed operations. Fitted with water jets it offers extremely shallow draft and excellent sea keeping characteristics. The deep Vee used commonly for our general workboat application has a very fine entry which has the design optimised for low resistance, exceptional levels of performance, economy and comfort.

NEW BUILD - 14.8m Open Coastal Ferry

ID: 1128566

This is the ideal boat for tour rides or ferrying to remote resorts. 4x 300hp Mercury Verado. Pax: 48. Crew: 2. Speed (max): 40 knots (4.55t dat). Speed (cruise): 28 knots (4500rpm). Luggage: 9m3. Marine Grade Aluminium.