Seaboats Main >
New Builds >
Passenger Vessels >
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - Landing Craft 840
Listing ID:
2268
| DESCRIPTION: | NEW BUILD - Landing Craft 840 |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 8.4m (27ft 6in) |
| BEAM: | 3.18m (10ft 5in) |
| LOCATION: | Ex factory, South Africa |
| BROKER: | Geoff Fraser |
|
|
|
The 8.4 m semi-deep V hull weighs only 2.25 tons, and offers 26 square metres of deck space with a 150 litre under deck built-in fuel tank and reinforced gunnels allowing very little flex. The hull configuration includes a self-draining wet deck, dual motor mounts, motor guards, 6 sturdy bollards fitted to the gunnels, helm console, helm seat and 2.0 m bow ramp. A canopy top over the helm console, seating for passengers, anti-fouling to the waterline and non-slip deck surface, for the safety of crew and passengers alike, are optional. Due to it's main purpose requiring optimal available deck space, stowage space is at a minimum above deck level on this boat. If required, under deck stowage can be incorporated into the hull design, closed with flush-mounted hatches and passenger seating can double as stowage.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
Purpose built Jockey Suspension Seats for Professional, Military, and high speed Commercial boats.
Listing ID:
1204
| DESCRIPTION: | New Build - Shark Seating |
| DATE LAUNCHED: | Built to Order |
| LOCATION: | ex factory, New Zealand |
| BROKER: | Geoff Fraser |
| PRICE: | Please ask for a quote. |
|
|
|
Purpose built Jockey suspension seats for Professional, Military, and high speed Commercial boats. Built in New Zealand to exacting standards to be lighter, better performing, and more cost effective than anything else out there. SAFER: Passenger Protection. Lower Forces. Upgrade-able Anytime.
Operational Effectiveness. Crash tested. Safety Options. STRONGER: Built For The Sea. Stretch Fit Neoprene. Life tested. Ultra-tough Polycarbonate. Heavy Occupant Safety. 3 Year Global Warranty. SMARTER: Light. Lower Cost. Repairable & Maintainable. Ultra-small Footprint. Customizable. Custom Work.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 22m Fast Catamaran Kit-Set at Greatly Discounted Price
Listing ID:
1752
| DESCRIPTION: | NEW BUILD - 22m fast Catamaran Kitset |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 22m (72ft 2in) |
| BEAM: | 6.30m (20ft 8in) |
| DRAFT: | 0.90m (2ft 11in) |
| LOCATION: | Shipped from Perth, Australia |
| BROKER: | Geoff Fraser |
| PRICE: | Only AUD 215,000 (approx USD 125,000) |
| PRICE NOTES: | This would normally sell for AUD 350,000 |
|
|
|
We present an opportunity to purchase a kit-set for a 22m Fast Catamaran at a greatly discounted price due to a defaulted sale. This Fast 22m, 130 pax catamaran alloy kit set, as it is designed now with water jets was designed for BKI Offshore (Indonesian Class). The Price includes: All DNV certified plates CNC cut and marked, All extrusions as required to build the vessel, All plans as required by approving authority, Electrical design, Flat packed and FOB, Perth Australia. If there is a desire to alter the design or change Class, then extra design fees etc. would apply.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 24m Displacement Passenger Cat
Listing ID:
1127
| DESCRIPTION: | NEW BUILD - 24m Displacement Passenger Cat |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 24m (78ft 8in) |
| BEAM: | 7m (22ft 11in) |
| DRAFT: | 1.2m (3ft 11in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
The Vessel is of the Twin Hull ‘Catamaran’ type and based on PRAGA’s highly successful and well proven Fibreglass (GRP) 20.00 meter Catamaran of which Five vessels have already been built in India to the design of M/s DON TATE ASSOCIATES of the U.K. The vessel is to be constructed in accordance with the IV Act under the Supervision and Certification of IR Class. The Catamaran is designed to give a very stable and spacious craft with One decks which allow craft for a variety of purposes. The main deck can be fitted out with seating for 100 persons. She can be used in Coastal Waters as well as in Rivers and Backwaters. Operation of the vessel is very economical since the power requirements of the very efficient Catamaran hulls is surprisingly low allowing a larger budget for fit-out. A Speed of 8.0 knots can be achieved with just 2 x 88. hp Marine diesel Engines. Speed 14 Knots (Cruising @ 1800 rpm), 16 Knots (Maximum @ 2300 rpm). Crew 6 (Minimum). Passengers 150 (Main Deck – AC Lounge). 100 (Upper Deck – Open Deck with Awning / GRP Targa Top – Optional Extra).
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 17m Aluminium Ferry
Listing ID:
1660
| DESCRIPTION: | NEW BUILD - 17m Aluminium Ferry |
| DATE LAUNCHED: | Building period 8 to 9 months |
| LENGTH: | 17.7m (58ft) |
| BEAM: | 8m (26ft 2in) |
| DRAFT: | 2.2m (7ft 2in) |
| LOCATION: | Surabaya, Indonesia |
| BROKER: | Franklin Taylor |
| PRICE: | USD 875 k delivered ex-factory Surabaya, Indonesia |
|
|
|
Speed: 12 knots. Top speed: 14 knots. 2 engines in-board 2 x 185 kW. Capacity approx: 110 passengers and 10 tonnes of cargo or 6 light cars.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 17.2m Aluminium Passenger Ferry - For Sale or Charter, 50% ownership considered!
Listing ID:
1329
| DESCRIPTION: | NEW BUILD - 17.2m Passenger Ferry |
| DATE LAUNCHED: | Available for delivery, late April or early May. |
| LENGTH: | 17.20m (56ft 5in) |
| BEAM: | 5.30m (17ft 4in) |
| DRAFT: | 0.80m (2ft 7in) |
| LOCATION: | Singapore |
| BROKER: | Geoff Fraser |
| PRICE: | USD695K for outright sale. Can be chartered. Also 50% co-ownership considered.. |
|
|
|
Classification: BV Light Ship Sea Area 2. Passenger: 80 ( Non - reclining ). Crew Complement: 3. Galley. Toilet. Air – Conditioning. 18 knots, cruising Speed: 16 knots. Main Engine: 2 x SDEC SC15G500.1CA2 : 330 kW (450 BHP). Propellers: Twin, Fixed Pitch.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 20m 150 Pax Catamaran Ferry
Listing ID:
1558
| DESCRIPTION: | NEW BUILD - 20m 150 Pax Catamaran Ferry |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 20m (65ft 7in) |
| BEAM: | 7m (22ft 11in) |
| DRAFT: | 0.78m (2ft 6in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
The Vessel is of the Twin Hull ‘Catamaran’ type and based on PRAGA’s highly successful and well proven Fibreglass (GRP) 20.00 meter Catamaran of which Five vessels have already been built in India to the design of M/s DON TATE ASSOCIATES of the U.K. The vessel is to be constructed in accordance with the IV Act under the Supervision and Certification of IR Class. The Catamaran is designed to give a very stable and spacious craft with One decks which allow craft for a variety of purposes. The main deck can be fitted out with seating for 100 persons + 50 persons on the Upper Deck. She can be used in Coastal Waters as well as in Rivers and Backwaters. Operation of the vessel is very economical since the power requirements of the very efficient Catamaran hulls is surprisingly low allowing a larger budget for fit-out. A Speed of 8.0 knots can be achieved with just 2 x 88. hp Marine diesel Engines.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 15m Multipurpose Vessel
Listing ID:
1498
| DESCRIPTION: | NEW BUILD - 15m Multipurpose Vessel |
| DATE LAUNCHED: | Normally Built to Order, one under construction now, delivery in 60 days. |
| LENGTH: | 15m (49ft 2in) |
| BEAM: | 4.2m (13ft 9in) |
| DRAFT: | 1m (3ft 3in) |
| LOCATION: | Mexico |
| BROKER: | Reynaldo Gil |
| PRICE: | USD 320,000 ex-Shipyard |
| PRICE NOTES: | Would be ready to deliver after 60 days of contract signature and advance payment. |
|
|
|
This versatile vessel is a design of Astillero SENI S de R.L de C.V, it has been designed as a "Tender boat" to provide the following services: Passenger and Cargo transport, Auxiliary boat to assist on docking and undocking of ships, Rescue Services, Pilot boat, Tourism passenger vessel. The design will incorporate a central deck house with seating for a maximum of 25 passengers + 2 crew it will serve as a safety and work area. The bridge will be situated on the upper level incorporating the control station, and radio communication equipment.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 19m Passenger Ferry
Listing ID:
1593
| DESCRIPTION: | NEW BUILD - 19m Passenger Ferry |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 19m (62ft 4in) |
| BEAM: | 6.5m (21ft 3in) |
| DRAFT: | 1.1m (3ft 7in) |
| LOCATION: | ex Shipyard, Mexico |
| BROKER: | Reynaldo Gil J. |
|
|
|
19m Passenger Catamaran Ferry. Service Speed: 24 knots. Main Engine Option 1: 2x John Deere 6090SFM85, 280kW @ 2200 RPM, M2 rating. Main Engine Option 2: 2x Nanni
Main Engine Option 3: 2 x Cummins or Yanmar. Propulsion: 2 x FPP. Construction: Aluminium / composite. Survey: USCG. Passenger Capacity: 65 pax + Crew.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
Now Agents for New generation high-performance Hydrofoil vessels
Listing ID:
1168
| DESCRIPTION: | JSC ALEKSEEV |
| LOCATION: | delivered everywhere |
| BROKER: | Giuseppe Filippone |
|
|
|
Introduction to JSC ALEKSEEV`s HYDROFOIL DESIGN BUREAU. It is with great pleasure that we announce that SeaBoats can now offer the full range of civil high-performance vessels produced in Russia by Alexeev’s Hydrofoil Design Bureau. With more than 60 years in activity and over 8,000 vessels launched, Alexeev’s Hydrofoil Design Bureau designs and manufactures hydrofoils, air-cavity vessels, hovercrafts, transport-amphibian platforms, ekranoplans and pleasure boats. Alexeev’s Hydrofoil Design Bureau has a rich history but is also a fast-growing company with a truly professional team, with real, broad experience in high-speed vessels’ research, design, building, testing and operation. The design portfolio includes 70 different hydrofoil vessels, 20 air-cavity vessels and 40 different types of ekranoplans. All these designs have been built and provide the foundations of the in-house Research and Development Department. The new generation of hydrofoils produced by Alexeev’s Hydrofoil Design Bureau employs leading-edge technology to combine economy of operation, performance, environmental efficiency and passenger comfort in a degree never before seen in high-speed vessels of this type .
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 7.1m Aft Console Workboat
Listing ID:
1547
| DESCRIPTION: | NEW BUILD - 7.1m Aft Console Workboat |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 7.1m (23ft 3in) |
| BEAM: | 2.5m (8ft 2in) |
| LOCATION: | Ex Factory, South Africa |
| BROKER: | Geoff Fraser |
| PRICE: | USD 26 280.00 |
|
|
|
The KFX 710 is configured as standard with wet deck, a centre helm console, guardrails, dual motor mount, a spacious and practical fore deck, and generous bow and aft stowage compartments. The incredible stability of this vessel provides a safe and convincing platform for work boat applications. This KFX 710''s seating layout is variable, the helm console can be at starboard, carpeting is optional and a folding or T-Top canopy can be fitted for protection from the sun. Clients may require the fitment of a davit and winch depending on the purpose of the vessel.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 15.6m Passenger Ferry
Listing ID:
1540
| DESCRIPTION: | NEW BUILD - 15.6m Passenger Ferry |
| DATE LAUNCHED: | Built to Order, 1 vessel in stock |
| LENGTH: | 15.6m (51ft 2in) |
| BEAM: | 5.85m (19ft 2in) |
| DRAFT: | 0.90m (2ft 11in) |
| LOCATION: | ex boatyard, South Africa |
| BROKER: | Geoff Fraser |
| PRICE: | USD 545,000 |
| PRICE NOTES: | There is one in stock now at a small discount |
|
|
|
The vessel is a medium speed ferry of modern catamaran design. Its hull shape is optimized for slow and medium speed operation, and to produce a low wake and have a shallow draft, well suited for coastal and inshore ferry operations. The vessel has proven excellent seakeeping qualities including passenger comfort and good stability. The hull form is proven with 18 vessels in service. The ferry has a seating capacity for up to 40 - 60 passengers. The vessel and its superstructure are constructed from advanced glass reinforced sandwich composites. Propulsion shall be by two (2/4) outboard engines, which are easy to maintain and clear of fouling from operation in dirty waters. The key features of the vessel design are: Shallow draught, low wake wash, optimized hull form for medium speed ferry operations, A comfortable enclosed saloon for up to 60 passengers, Advanced composite construction for ease of manufacture and solid structural integrity.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 11m Passenger Tourism RIB
Listing ID:
1543
| DESCRIPTION: | NEW BUILD - Vector Ribboat RIB 1100 |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 11m (36ft 1in) |
| BEAM: | 3.31m (10ft 10in) |
| DRAFT: | 0.35m (1ft 1in) |
| LOCATION: | ex factory (Ukraine) |
| BROKER: | Giuseppe Filippone |
| PRICE: | from EUR 35,000 |
|
|
|
Based in Ukraine Vector Ribboat is a very experienced builder of aluminium hull, rigid inflatable boats. They have an extensive catalog of models for both professional and recreational use that SeaBoats are proud to market all over the globe. The 11 mt. Model has been especially developed to for operators working in the tourist and recreational diving sector. It is a very tough and practical motorboat, built to the highest standards and meant to last many years of demanding work. This boat has CE Certification and can be equipped with a large list of options to better address any particular requirement. With a weight of 1,800 Kg and a width (with deflated tubes) of 2,45 mt, RIB 1100 can be trailered easily and the shipyard can arrange delivery anywhere at reasonable costs.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 11m 43 pax Water Taxi
Listing ID:
1522
| DESCRIPTION: | NEW BUILD - 11m 43 Pax Water Taxi |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 11m (36ft 1in) |
| BEAM: | 4.2m (13ft 9in) |
| DRAFT: | 0.60m (1ft 11in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
|
|
|
Passengers: 43, Crew: 2. CLASS: IR Class ( India Register of shipping ). Main Engines: Suzuki - DF 250 A, 2 x 250 HP @ 6100 rpm. Speed: Light: 40 knots (100% MCR), Loaded: 33 knots (100% MCR)
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 11m Foil Assisted Power Cat
Listing ID:
1404
| DESCRIPTION: | NEW BUILD – 11 mt Foil-Assisted Power Cat |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 10.9m (35ft 8in) |
| BEAM: | 3.70m (12ft 1in) |
| DRAFT: | 0.53m (1ft 7in) |
| LOCATION: | Europe |
| BROKER: | Giuseppe Filippone |
|
|
|
This is a semi-asymmetrical, foil assisted catamaran designed to offer economical cruising speeds of 24 -26 knots with twin 300hp outboards with up to 24 passengers on board. Designed by Noah Thompson (NZ), the boat is available in a variety of layouts to better address the needs of dive and tour operators. Foil-assistance permits a higher level of comfort and lower fuel consumption. The NXT 35 SP is slightly bigger than the 35 DC but has similar characteristics : seaworthy hull, huge cockpit area, economy of operation and maintenance free construction. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 SP is characterized by excellent performance and good load carrying capacity. She is ideally suited for the Mediterranean or tropical climates with open or enclosed sides, drop down clear screens and a layout fully customizable. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements. The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 18.48m Guest Transfer Vessel
Listing ID:
1405
| DESCRIPTION: | NEW BUILD - Guest Transfer Vessel / Ferry |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 18.48m (60ft 7in) |
| BEAM: | 5.34m (17ft 6in) |
| DRAFT: | 1.20m (3ft 11in) |
| LOCATION: | ex factory (Turkey) |
| BROKER: | Giuseppe Filippone |
| PRICE: | P.O.A. |
|
|
|
GTV 17 is a high performance ferry designed for tourist or crew-transfer services. She can carry 50 passenger safely , and deliver up to 26 kn cruising speed in any weather condition. Two units have already been built and are in service in Qatar. The boat is of GRP (PVC Foam Sandwich) construction and equipped with two heavy duty diesel engines of 650 Hp each. The hull is also optimized for high performance and seakeeping on shallow water conditions.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 11m Diving / Fast Transfer / Power Cat
Listing ID:
1398
| DESCRIPTION: | NEW BUILD - 11m Diving / Fast Transfer / Power Cat |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 10.8m (35ft 6in) |
| BEAM: | 3.43m (11ft 3in) |
| DRAFT: | 0.5m (1ft 6in) |
| LOCATION: | Europe |
| BROKER: | Giuseppe Filippone |
|
|
|
Characterized by a seaworthy hull, huge cockpit area, economy of operation and maintenance free construction, the boat is designed and built to address the needs of dive and tour operators who want to offer the best to their clients. This powercat workboat is ideal for small resort owners, passenger runs, dive operations, and surf charters. With several units already delivered and in service in various parts of the world, the NXT 35 DC is characterized by excellent performance and good load carrying capacity. She is ideally suited for the Mediterranean or tropical climates with drop down clear screens and the layout can be customized to suit your operation. The catamaran is available in a variety of configurations and can be customized to meet an operator’s exact requirements. The hull is standard but the cockpit layout can be easily modified and is basically designed in cooperation with the operator.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 16m Displacement Catamaran Ferry
Listing ID:
1368
| DESCRIPTION: | NEW BUILD - 16m Displacement Catamaran Ferry |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 16m (52ft 5in) |
| BEAM: | 6.47m (21ft 2in) |
| DRAFT: | 1.1m (3ft 7in) |
| LOCATION: | ex shipyard, India |
| BROKER: | Geoff Fraser |
|
|
|
Displacement: 26tons. Engine: 98BHP@2000rpm x 2 ( ALM370 )
GB Ratio: HG-7 Hydraulic type 2:1). Speed: 10 knots. Generator: 15 KVA. Passenger Capacity: 90 persons. Type: Tourist Boat
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
New Build Agency - Foiling Passenger Ferries
Listing ID:
1195
| DESCRIPTION: | High-speed passenger hydrofoils of JSC "Alexeev’s Hydrofoil Design Bureau" |
| DATE LAUNCHED: | Built to Order |
| LOCATION: | delivered everywhere |
| BROKER: | Giuseppe Filippone |
|
|
|
SeaBoats brings to the world the High-speed passenger hydrofoils of JSC "Alexeev’s Hydrofoil Design Bureau". JSC "Alexeev’s Hydrofoil Design Bureau" is a leader in the design of high-speed vessels using different principles of hydrodynamic support. High-speed vessels designed by Alexeev’s Hydrofoil Design Bureau, such as "Rocketa", "Meteor", "Kometa", "Voshod", etc. have a long and successful history of operation. More than 200 projects have been designed and about 8 thousand passenger vessels and boats have been built, operating in 35 countries. Currently JSC "Alexeev’s Hydrofoil Design Bureau" has developed projects of unique river and sea high-speed passenger vessels of the new generation, combining the latest technologies and innovations in the field of high-speed shipbuilding. Thus, in 2018, within the framework of the St. Petersburg International Economic Forum (SPIEF 2018), a solemn presentation of the new river hydrofoil vessel "Valdai 45R" was held, the serial construction of which is currently underway at our enterprise. Also, in the presence of the Prime Minister of the Russian Federation on July 30, 2018, a high-speed passenger line was officially launched, using the new "Kometa 120M" hydrofoil in Black sea. The vessels are the successors of the best traditions of high-speed hydrofoils, equipped with an intuitive control system, meet modern safety and environmental standards, the salons are equipped with comfortable seats, climate control system. The improved hydrodynamic characteristics of hydrofoils, the use of light alloys and composite materials of the hull structure in combination with modern power plants provide low fuel consumption. Moreover the use of hydrofoils permits to reduce wave making even at high speeds, an important factor to minimize coast erosion and preserve coastal ecosystems.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD KITS - Alloy Vessels of All Types. Shipped Globally.
Listing ID:
679331
| DESCRIPTION: | Kitsets - Alloy vessels |
| DATE LAUNCHED: | Built to order |
| LENGTH: | 12m - 40m |
| BEAM: | various including monohulls |
| DRAFT: | various |
| BROKER: | Geoff Fraser |
| PRICE: | Price on application |
| PRICE NOTES: | Plus additional shipping costs. |
|
|
|
Do you have a local yard that is capable of aluminium welding and vessel construction, but they don’t have the design you need, Or are you such a yard? We have a range of designs in the 10m to 40m plus range which that can be supplied in kitset form for you to build. Shipping costs to most parts of the world make the purchase of new builds too expensive for you to consider. The answer is our kitset, a complete package including a step-by-step building plan and fabricated units ready to be assembled. The whole kit will be shipped in containers and will include everything required to complete the vessel, including fittings, engines and all other equipment (if required). All you need is qualified aluminium welders and a construction site. Designed and fabricated in Australia or Singapore. If we don’t already have a design that fits your purpose, we will find one.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 13.2m Catamaran Platform Boat.
Listing ID:
1167
| DESCRIPTION: | NEW BUILD - 13.2m Catamaran Platform |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 13.2m (43ft 3in) |
| BEAM: | 5.6m (18ft 4in) |
| DRAFT: | 1m (3ft 3in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
Ideal for sheltered water work or tourism applications. Fuel: 200 Litres. Water: 100 Litres. Outboard Motor: 2x 60 HP. Speed (Laden): 8 – 10 knots. Passengers: 64. Crew: 2
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - Vector Ribboat RIB 900-P
Listing ID:
1209
| DESCRIPTION: | Vector Ribboat RIB 900 |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 9.05m (29ft 8in) |
| BEAM: | 3.30m (10ft 9in) |
| DRAFT: | 0.30m (11in) |
| LOCATION: | ex factory, Ukraine |
| BROKER: | Giuseppe Filippone |
| PRICE: | from USD 31,720 |
|
|
|
Based in Ukraine Vector Ribboat is a very experienced builder of aluminum hull, rigid inflatable boats. They have an extensive catalog of models for both professional and recreational use that SeaBoats are proud to market all over the globe. The RIB 900-P model has been specifically developed for commercial operators who need a tough boat suitable for tourist services of various types. The standard layout can be customized and a variety of optional items (diving ladders, air-bottles racks, etc.) can be added to address any operational requirement.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
As New 22m - 130 Pax Commercial Charter Catamaran Ferry
Listing ID:
1936
| DESCRIPTION: | 22 meter Commercial Charter Catamaran |
| DATE LAUNCHED: | April 2017 |
| LENGTH: | 22m (72ft) |
| BEAM: | 8m (26ft) |
| DRAFT: | 1.35m (4ft 5in) |
| LOCATION: | Fiji |
| BROKER: | Clive Bennett |
| PRICE: | AUD $2.5 million (All offers considered) |
|
|
|
This well-appointed professionally built 22 meter Passenger Craft is designed for a commercial operator or resort, catering for clients on scenic day cruises, snorkeling and / or diving excursions and social events.
Cool breezes and sweeping views are optimized by the open sided hard top design; providing protection from the sun, with the option of roll down clears if required.
The vessel features a commercial style galley with stainless steel appliances and additional wet bar forward. Easy access to the water is via the dual walk through transoms with fresh water showers available.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 20m 100 Passenger Cat
Listing ID:
1101
| DESCRIPTION: | NEW BUILD - 20m 100 Passenger Cat |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 20m (65ft 7in) |
| BEAM: | 7m (22ft 11in) |
| DRAFT: | 0.8m (2ft 7in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
|
|
|
The Vessel is of the Twin Hull ‘Catamaran’ type and based on PRAGA’s highly successful and well proven Fibreglass (GRP) 20.00 meter Catamaran of which Five vessels have already been built in India to the design of M/s DON TATE ASSOCIATES of the U.K. The vessel is to be constructed in accordance with the IV Act under the Supervision and Certification of IR Class. The Catamaran is designed to give a very stable and spacious craft with One decks which allow craft for a variety of purposes. The main deck can be fitted out with seating for 100 persons. She can be used in Coastal Waters as well as in Rivers and Backwaters. Operation of the vessel is very economical since the power requirements of the very efficient Catamaran hulls is surprisingly low allowing a larger budget for fit-out. A Speed of 8.0 knots can be achieved with just 2 x 88. hp Inboard Marine Diesel Engines.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - Vector Ribboat RIB 1100 K
Listing ID:
1053
| DESCRIPTION: | NEW BUILD - Vector Ribboat RIB 1100 |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 11m (36ft) |
| BEAM: | 3.31m (10ft 10in) |
| DRAFT: | 0.35m (1ft 1in) |
| LOCATION: | ex factory, Ukraine |
| BROKER: | Giuseppe Filippone |
| PRICE: | POA |
|
|
|
Vector Ribboat is a very experienced builder of aluminium hull, rigid inflatable boats and the 1100 K is their largest model. It is a tough and practical cruising boat built to workboat standards. With a full cabin forward, separate toilet and a large flying bridge this boat offers plenty of room while retaining the ability to be easily trailered. This boat has CE Certification and can be equipped with a large list of options to better address any particular requirement.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 10m 34 pax Passenger Cat
Listing ID:
2183
| DESCRIPTION: | NEW BUILD - 10m 34 pax Passenger Cat |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 10m (32ft 9in) |
| BEAM: | 4.2m (13ft 9in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
|
|
|
Passengers: 34, Crew: 2.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 15m 60 Pax Ferry
Listing ID:
2179
| DESCRIPTION: | NEW BUILD - 15m 60 Pax Ferry |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 15m (49ft 2in) |
| BEAM: | 5.4m (17ft 8in) |
| DRAFT: | 1.2m (3ft 11in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
|
|
|
The vessel shall be constructed as a medium speed, sea kindly, and passenger service vessel for the use in Indian waters. The vessel shall be arranged as shown in the preliminary drawing. The Helm is arranged to allow all round vision. Boarding is effective by the provision of wide side decks and grab rails, allowing side, bow or stern loading. Entry to the passenger saloon is via rear, and side mounted weatherproof doors.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - Centurion 46 Fast Ferry.
Listing ID:
2093
| DESCRIPTION: | NEW BUILD - Centurion 46 Fast Ferry |
| DATE LAUNCHED: | Built to Order, 4-5 months from Contract Signing |
| LENGTH: | 14m (45ft 11in) |
| BEAM: | 3.8m (12ft 5in) |
| LOCATION: | ex factory, Singapore |
| BROKER: | Geoff Fraser or Richard Pierrepont |
|
|
|
The Centurion 46 Fast Ferry is a sleek and beautifully designed boat for carrying 12pax with 2 crew in a spacious and comfortable environment. It is capable of running at a top speed of 30 knots with twin 281hp ISUZU Marine diesel inboard engines or sterndrives.
All round windows and wind shield allows clear 360 view for the captain which will allow safe handling of the boat. The boat is also built with our foam filled double hull construction to ensure maximum safety in the event that the hull is damaged.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 10 Meter 30 Passenger Catamaran OBM
Listing ID:
4083
| DESCRIPTION: | NEW BUILD - 10 Meter 30 Passenger Catamaran OBM |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 10m (32ft 9in) |
| BEAM: | 4.2m (13ft 9in) |
| DRAFT: | 0.65m (2ft) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
Extremely useful 10m Cat with the capability to carry 30-31 passengers.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 15m Catamaran Ferry.
Listing ID:
426399
| DESCRIPTION: | NEW BUILD - 15m Catamaran Ferry |
| DATE LAUNCHED: | BUILT TO ORDER |
| LENGTH: | 15.00m |
| BEAM: | 5.40m |
| DRAFT: | 1.20m approx |
| LOCATION: | ex Factory, India |
| BROKER: | Geoff Fraser |
| PRICE NOTES: | Price depends on engine choice. |
|
|
|
Hull: Catamaran Planing Hull. Construction: GRP. Conventional Drives. Speed Cruising: 20 Knots, Speed Sprint: 22 Knot. Compliment - Passengers: 60, Main Engines: Cummins QSL-9 (405hp @ 2100 rpm) Crew: 3. Designed by: Mark Ellis Marine Design (Australia). This Catamaran Ferry is available either configured to go faster or slower and we can quote on a variety of specifications.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 10m Day Cruiser Catamaran
Listing ID:
439466
| DESCRIPTION: | NEW BUILD - 10m Day Cruising Catamaran |
| DATE LAUNCHED: | BUILT TO ORDER |
| LENGTH: | 10.00m |
| BEAM: | 4.20m |
| DRAFT: | 0.60m |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
10m – Day Cruising Catamaran. 10.00m x 4.20m x 0.60m. Fuel Capacity: 2x 250L. Water: 100L. Construction: GRP. 2x 250HP Outboard Motors. Speed Cruising: 30 Knots. Speed Sprint: 35 Knots. Passengers: 18, Crew: 2. Designed By: Mark Ellis Marine Design.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 10m Resort Taxi
Listing ID:
439437
| DESCRIPTION: | NEW BUILD - 10m Resort Taxi |
| DATE LAUNCHED: | BUILT TO ORDER |
| LENGTH: | 10.00m |
| BEAM: | 4.00m |
| DRAFT: | 1.20m |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
10m – 18 Passenger Resort Taxi. Hull: Catamaran Planning Hull. Construction: GRP. Main Engines:
Option A: 2x 250HP Outboard Engines, Option B: 2x 250 HP Stern Drives, Option C: 2x 270 HP Conventional Drives, Option D: 2x 300 HP with Water Jets, Option E: 2x 300 HP with Surface Drives.
Propulsion: Based on Option. Speed Cruising: 25 – 30 knots, Speed Sprint: 28 – 35 knots. Passenger: 18 – 25, Crew: 2. Designed By: Mark Ellis Marine Design.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 15m VIP Cat
Listing ID:
588363
| DESCRIPTION: | NEW BUILD - 15m VIP Cat |
| DATE LAUNCHED: | BUILT TO ORDER |
| LENGTH: | 15m (49ft) |
| BEAM: | 5.4m (17ft 8in) |
| DRAFT: | 1.3m (4ft 3in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
The vessel shall be constructed as a medium speed, sea kindly, VIP passenger service vessel for the use in Indian waters. The vessel shall be arranged as shown in the preliminary drawing. The Helm is arranged to allow all round vision. Boarding is effective by the provision of wide side decks and grab rails, allowing side, bow or stern loading. Entry to the passenger saloon is via rear, and a side mounted weatherproof doors.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 10m 23 PAX Ferry
Listing ID:
432397
| DESCRIPTION: | NEW BUILD - 10m 23 PAX Ferry - 24 knots version |
| DATE LAUNCHED: | BUILT TO ORDER |
| LENGTH: | 10.07m |
| BEAM: | 4.20m |
| DRAFT: | 0.60m |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
Built to Order 10m, 23 PAX Cat Ferry. 10.07m x 4.20m x 0.60m. Water: 100L. Catamaran Planning Hull. GRP. 2 x 300HP. Stern Drives. Cruising: 24 knots. Sprint: 26 knots. Passenger: 23. Crew: 2. Generator: Sole SA – 7GSC. Air Conditioner. Designed By Mark Ellis Marine Design in Australia.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - 16.5m Flush Deck Passenger Cat
Listing ID:
655405
| DESCRIPTION: | NEW BUILD - 16.5m Flush Deck Passenger Cat |
| DATE LAUNCHED: | BUILT TO ORDER |
| LENGTH: | 16.50m (54ft 1in) |
| BEAM: | 5.40m (17ft 8in) |
| DRAFT: | 1.60m (5ft 2in) |
| LOCATION: | ex factory, India |
| BROKER: | Geoff Fraser |
| PRICE: | POA |
|
|
|
16.50m (54ft 1in) x 15.40m (50ft 6in) x 5.40m (17ft 8in). Fuel Capacity: 2 x 1000 Litres. Water: 500 Litres. GRP. Main Engines: 2 x 400 HP, Conventional Drives. Speed Cruising: 20 Knots, Speed Sprint: 22 Knots. Passengers: 70, Crew: 4, Crew Berths: 4. Air Conditioning. Toilets: 2. Designed by Mark Ellis Marine Design.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - Seaward Nelson 42
Listing ID:
2026
| DESCRIPTION: | NEW BUILD - Seaward Nelson 42 |
| DATE LAUNCHED: | Built to Order |
| LENGTH: | 12.8m (42ft) |
| BEAM: | 4.11m (13.5ft) |
| DRAFT: | 1.21m (4ft) |
| LOCATION: | ex factory, UK |
| BROKER: | Richard Pierrepont |
| PRICE: | As a guide only, 670,000 GBP ex works |
|
|
|
A good number of Nelson 42 pilot boats and service launches are providing sterling service, day in and day out, around the world. They are noted for their exceptionally soft ride, excellent handling in difficult sea conditions and for their predictable handling during ship boarding. Robustly built, well-gendered and produced with maintainability in mind, they provide their operators with the ideal tool for this particularly demanding job.
The Seaward Nelson 42 is available with a fixed or resiliently-mounted wheelhouse, with seating for 6 or 8 and a choice of forward or aft raked screens. Various engines options are available, providing operating speeds up to 25 knots. Seaward also builds a Service Launch version of the Nelson 42, ideal for coastal patrol and multi-role applications.
|
|
|
?&font=Verdana&flags=4&quality=90&spacing=0&resizeTo=320)
|
|
NEW BUILD - Blyth 10m Series
Listing ID:
587835
| DESCRIPTION: | NEW BUILD - Blyth 10m Series |
| LENGTH: | 10.00m |
| BEAM: | 4.87m |
| LOCATION: | ex factory, UK |
| BROKER: | Richard Pierrepont |
| PRICE: | POA |
|
|
|
The original Blyth 33 has now become the Blyth 10m, evolving and improving with time and experience, making her performance second to none. In recent years, the company has developed 11, 12, and 14m catamarans and the introduction of the new Blyth 17 metre vessel continues to take the range from strength to strength, maintaining the company’s position as the leading supplier of bespoke catamaran-based workboats. The company recognizes the importance of continuous product development together with the improvement of management systems essential to support this and is proud to hold ISO 9001 accreditation.
|
IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
