Seaboats Main > New Build Agencies > Builders > Loyd Shipyard >

NEW BUILD - 12m Mooring Boat .



Listing ID:
4106

DESCRIPTION:NEW BUILD - 12m Mooring Boat
DATE LAUNCHED:Built to Order
LENGTH:11.6m (38ft)
BEAM:3.8m (12ft 5in)
DRAFT:0.9m (2ft 11in)
LOCATION:ex factory, Turkey
BROKER:Richard Pierrepont

Send Enquiry


General Description:

Please scroll down to view more photos

A modern single screw steel hull vessel of standard design suitable for marine operations in both harbour and coastal areas.
 
DIMENSIONS
Length OA: 11.60 m
Beam OA: 3.80 m
Depth at sides: 2.00 m
Draught Aft: 0.90 m
Displacement: 13.14 tons
 
TANK CAPACITIES
Fuel-Oil: 1.10 m3
 
PERFORMANCES
Bollard Pull: 3.5 ton
Speed: 13.4 Knots
 
PROPULSION SYSTEM
Main Engines: 1x Iveco N67
Total Power: 188kW(270hp) @ 2800rpm
Gear Boxes: 1x Twindisc
Propulsion: Fixed Pitch Propellers 850mm Diameter
 
AUXILIARY EQUIPMENT
Main Generator: 230/400V 12kVA 50Hz
Pumps: Bilge,Fire&GS
 
DECK LAYOUT
Anchor: 40kg Pool
Chain: 20m 12mm
Anchor Windlass: 5 ton Hydraulic Capstan
 
NAUTICAL AND COMMUNICATION EQUIPMENT
Search Lights: 100w
Compass: Standart
VHF: Raymarine Ray55
 
CONSTRUCTION
The vessel is to be welded construction; all steels will be shot blasted and painted before fabrication, all steels will be marine quality and min Grade-A
 
Construction Details
Steel Certificates from Makers are to be documented
Bottom plating : 6 mm.
Side plating : 5 mm.
Deck plating : 5 mm.
Bulkhead plating : 5 mm.
Tank plating : 5 mm.
Wheelhouse plating : 5 mm.
Bottom and side frames : 5 mm.
Deck girders : 5 mm.
Frame spacing : 500 mm
 
Tanks Capacities
Fresh water, oil fuel, tanks will be fitted with ventilation and filling pipes above main deck and level gauges in E/R for oil fuel tanks.
Fuel Tank : 2 X450 Lt
Oily Water : 1 X 100 Lt
 
Superstructure
A steel wheelhouse layout to offer an unobstructed view in all directions. The wheelhouse is to be designed to prevent damage when coming alongside. The wheelhouse have an access door in the aft bulkhead and is to be provided with the following windows;
 
One window at the front
Two windows at port side
Two windows at starboard side
One window at the back
 
The following equipment will be supplied and fitted in the wheelhouse;
Compass
Machinery instruments, alarms and emergency stops for both main and auxiliary engines will be arranged in the console
Clock
Electric horn
Switch board
Fuse box
Wipers
 
Hatches
The hull is to have hatches with suitable dimensions and sealing which shown on the GA Plan;
 
Fenders
Double eye heavy duty Rubber fenders will be fitted horizontally around the vessel .
 
Bollards
Mooring posts : 2 off amidships - 2 off forward
Double Bollards : 2 off aft
 
Lifting Lugs
4 steel lifting lugs double eye will be welded to the hull structure to allow an easy handling and lifting of the boat.
 
Manhole
All tanks to be accessible through a manhole with approved dimensions and closed by a watertight cover secured by steel bolts and nuts.
 
Hand Rails
Hand rails fitted around wheel house both side as shown on the GA plan.
 
Mast
A steel mast for navigation lights, flags and antenna are to be fitted at the wheelhouse top deck. The mast is to be foldable type (bolted construction)
 
Stairs, ladders and climbing steps
Steel stairways fitted on the starboard side of the wheelhouse.
Steps welded at wheelhouse wall for access to the top deck.
 
Windows
All superstructure windows are to be of laminated glass and bonded by sikaflex system. Front window is to be fitted with electrical 12/24V screen wiper. Switch for wiper are to be situated in the dashboard.
 
Painting / Jotun or Hempel
Hull outside, below waterline
2 coats JOTAMASTIC 87 ALU WG Mastic Epoxy Primer : 150 microns DFT
1 coat SAFEGUARD UNIVERSAL ES GREY Sealer Coat : 100 microns DFT
2 coats SEAQUANTUM ULTRA S Antifouling : 100 microns DFT
 
Hull outside, topside
2 coats JOTAMASTIC 87 ALU WG Mastic Epoxy Primer : 150 microns DFT
1 Coat PENGUARD FC TOPCOAT Epoxy : 100 microns DFT
 
WEATHER DECK
2 coats OTAMASTIC 87 ALU WG Mastic Epoxy Primer : 150 microns DFT
1 coat PENGUARD TOPCOAT FC : 100 microns DFT
 
HULL AND SUPERSTRUCTURE INSIDE
1 coat JOTAMASTIC 87 ALU WG Mastic Epoxy Primer : 150 microns DFT
 
SUPER STRUCTURE OUTSIDE
2 coats JOTAMASTIC 87 ALU WG Mastic Epoxy Primer : 150 microns DFT
2 coats PENGUARD TOPCOAT WHITE : 85 microns DFT
 
The surface treatment system to be;
Further painting over sandblasted and shop primed plates from store, weldings and damaged areas mechanical brush cleaning before painting.
 
Propulsion and Steering System
Main engine is to drive the propellers through gearbox and stainless steel shaft. propeller shaft has to be fitted with aft and fore bearings, stern tube bracket and seal. Shaft bearings are water lubricated cutless type. Propeller made of MnBr material.
 
The following is the full engine specification for one main engines:
One unit. IVECO MARIN DIESEL ENGINE
 
Marine propulsion engines
Min 300 hp @ 3000 rpm
Reduction Gear Ratio: 2.8 : 1 or 3: 1
 
Propellers
Propeller : 1pcs
Material : Cu-1 MN Bronze
Propeller Type : Fixed pitch
Number of Blades : 3 blades
Shaft : 1 x 70 mm. diameters CR/NI
Stern tube : 1 x Brass sleeve oil resistant cutless rubber bearings
 
Outer bearing and stuffing box is to be housed in integral mild steel bosses, and protected with single plated deep skegs under.Propeller have to be rope protection same as previous boat.
 
Steering Gear
Steering provided with a powered hydraulic system that controls the rudder position. Ahead / astern direction and engine revolutions are controlling by a handle operated controls.
Steering Gear : Hydraulic
Cylinder type : DS 290 type - 1 pc
Helm pump type : DP 88 type - 1 pc
Rudder Angle : 37 deg. P & St
Rudder : 1 pcs sigle plate
Rudder shaft : 1 x Q50 CR/NI
 
Pumps
Bilge pumps : 12 V - 2 pcs
Fire/deck wash pump : 220V - 1 pc
 
The Pumps all electrically driven capacity and head will be suitable for vessel condition and volume.
 
Fuel oil tanks will be fitted with valve and level indicator.
Engine room floor plates will be of 5mm AL chequer plate.
 
Anchor Arrangement
The anchor to be fitted one side of vessel. Chain locker will be arranged in forward space. 30kg anchor 8 mm x 5 m anchor chain and 20 mm dia 30 m anchor rope will be put at the port side of the Vessel together with a DC windlass with 400 kg capacity
 
Towing Winches
One unit hydraulic winch driven unit will be purchased and other parts two horizontal drum ,foundation ,connections will be designed and fabricated in our workshop and
installed in place by the yard. It will be fitted with two horizontal rope drum . The winch to be hydraulic motor driven type heavy duty. Yard will make construction of foundation of the crane according to second boat size.
 
Auxiliary Engine
One marine generating set .
Generator Set 220 Volts, 50 HZ
Main Generator Sets : 1 x marine generator
Hydraulic Pump : PTO or electrically driven hyd.motor
 
Wheel House Instruments
The following instruments fitted; Main Engine x 1
1 – Emergency stop push button
2 – High water temperature lamp
3 – Lubrication oil pressure low lamp
4 – Engine oil pressure indicator
5 – Engine tachometer with combined hour meter
6 – Battery indicator
 
ELECTRICAL SECTION
General
-All equipment will be labeled to show clearly their function
-Main Electrical system shall be 12 V DC.
-Main engines starters and alternators are to be 12 V DC.
 
Batteries
-One bank for main engine start min 120 A/h capacities
-One bank for generator engine start min 80 A/h capacities
-All batteries are in the plastic boxes
 
Distribution Boards in the wheelhouse
System Switches
Bilge Pumps
Fire and Service Pump
Engine Room Lights
Wheelhouse Lights
Navigation Lights
Spare
Wiper switch
Horn switch
Anchor switch
 
Safety Equipment
4 pcs. Lifejackets - reflective tape and light to be fitted
2 pcs. Lifebuoys with 30 m line to be provided
1x boat hook
1x tool box
1 x fire Box with hose and nozzle.
2x 6 kg dry powder fire extinguishers.

 

4106: NEW BUILD - 12m Mooring Boat - 095.jpg


Download as PDF



IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

You are logged in:


Logout

facebook-button

TwitterButton

  Bookmark this page in your web browserwww.seaboats.net - HomeCartNo Items in your Cart