Seaboats Main > Commercial Vessels > Work Boats > Dredges >

48.21m Hopper/Grab Dredger For Sale & Charter
Listing ID: 1016

DESCRIPTION:48.21m Hopper/Grab Dredger For Sale & Charter
DATE LAUNCHED:1973
LENGTH:48.21m (158ft 2in)
DRAFT:4.07m (13ft 4in)
LOCATION:Europe
BROKER:Richard Pierrepont
PRICE:340,000 USD

Built: 1973, UNITED KINGDOM. Flag: PALAU. Next DD: July 2020. Next SS: July 2022. Next Annual Survey: October 2020. Total power output (BHP): 1382 bhp. Main Engines: 2 x Perkins. Twin screw.


Send Enquiry View Full Details


48.21m Grab Dredger
Listing ID: 2150

DESCRIPTION:48.21m Grab Dredger
DATE LAUNCHED:1973
LENGTH:48.21m (158ft 2in)
BEAM:12m (39ft 4in)
DRAFT:4.077m (13ft 4in)
LOCATION:East Coast, United Kingdom
BROKER:Richard Pierrepont
PRICE:GBP 325,000

Flag: Palau. Classification: ISB. Builder: Richard Dunston (Hessle) Ltd. Yard No.: S890. Gross Tonnage/Net Tonnage: 655,92 tons / 203,33 tons. Deadweight: 887,2 tonnes. Lightship: 777,6 tonnes. Displacement: 1664,8 tonnes. Main Engine: Brand & Name: Twin British Polar Angine, Horse Power: 691X2. 5 crew. Hopper Volume: 587,13m�


Send Enquiry View Full Details


635m3 Trailing Suction Hopper Dredge
Listing ID: 4100

DESCRIPTION:Sale of 635m3 Trailing Suction Hopper Dredge
DATE LAUNCHED:1979
LENGTH:55.15m
BEAM:12m
DRAFT:3.20m (Empty); 4.10m (Loaded)
LOCATION:New Zealand
BROKER:John Kearns
PRICE:1.95m New Zealand Dollars

635m3 Trailing Suction Hopper Dredge built 1979 to Lloyds class in New Zealand. Maintained in New Zealand survey which was renewed Sept 2017 & expires Sept 2022. Powered by twin Mirrlees Blackstone Marine Engines rated at 470 HP each @ 750 RPM. The hopper capacity is 635m3 at maximum overflow. The 500mm trailing suction pipe can operate down to a maximum depth of 12.5m. The drag head is fitted with a conventional IHC 105�32.5�50 dredge pump driven by a Mirrlees Blackstone 470 hp engine. The Jet water pump provides up to 120 psi at the drag head. Discharging is via bottom doors, or via the port side pump ashore connection with the dredge pump. The hopper is fitted with an adjustable overflow. Mounted at the forward end of the hopper is a Hitachi Dragline Crane with a SWL of 5 tonne and equipped with a 1.2m3 Clamshell Bucket. The vessel is also fitted with a four-point mooring system and when used in conjunction with the Dragline Crane is useful for dredging in confined areas. Dredging Software is HYDROPRO, which is displayed on 3 monitors and used in combination with the IHC Load and Draft Management program. Vessel is well maintained by same owner since new and is in operational status.


Send Enquiry View Full Details


45m Trailing Suction Dredge.
Listing ID: 433641

DESCRIPTION:45m Trailing Suction Dredge
DATE LAUNCHED:1972, Spain (converted in 1996)
LENGTH:45m (147ft 7in)
BEAM:9.8m (32ft)
DRAFT:3.66m (12ft)
LOCATION:West Med
BROKER:Richard Pierrepont
PRICE:1,350,000 EUR

45m Trailing Suction Dredge For Sale in Europe. Flag: Spanish. Class: Local Class 3T (Sea Going). Converted into trailing suction split hopper dredger in 1996. Submerged load pump Warman working with hydraulic engine and discharge pump Bagena with hydraulic engine. Some spares included for Schottel, hydraulic and pumps. Reported to be in full operational condition. Spent more than 20 years trading in fresh water. Hull refitted in 2009 on DD and paint and epoxy coat applied on latest DD in September 2011. Over flow is hydraulic. Height can be regulated.


Send Enquiry View Full Details


NEW BUILD - Scavenger HYD22 Weed Harvester
Listing ID: 2094

DESCRIPTION:NEW BUILD - Scavenger HYD22 Weed Harvester
DATE LAUNCHED:Built to Order
LENGTH:8.17m (26.8ft)
BEAM:2.1m (6ft 10in)
DRAFT:0.3m (1ft)
LOCATION:ex factory, Singapore
BROKER:Geoff Fraser or Richard Pierrepont
PRICE:SGD 155,000

The Scavenger HYD22 Weed Harvester is the latest dual purpose river maintenance boats designed by FiveAB Group. This boat can be used for collecting floating rubbish via the conveyor belts directly into the boat. It can also be used to cut underwater weeds up to 1.2m depth and the weeds will be collected immediately via the conveyor and into the boat for disposal.� The unique twin propeller propulsion system will give you extremely good manoeuvrability in tight situation and can even rotate the vessel on the spot.


Send Enquiry View Full Details


59m Split Hopper Barge and Suction Dredge for Charter
Listing ID: 431786

DESCRIPTION:Split Hopper Barge and Suction Dredge
DATE LAUNCHED:1980
LENGTH:59.60m (195ft 6in)
BEAM:9.50m (31ft 2in)
DRAFT:3.35m (10ft 11in)
LOCATION:West Mediterranean
BROKER:John Kearns

60m Split Hopper Barge & Suction � Mechanical Dredger for Sale in Southern Europe. Class: Local Class (3T Ocean Going). Machinery & Propulsion: Total Power Output: 714 HP. Main Engines: 2 x Scania DS1402. Main Propulsion System: Aquamaster. Speed (cruising � maximum): 9 knots fully loaded. Accommodation � 6. Loading Time: 2 hours with back hoe; 1 hour with suction pump. Hopper Capacity: 660m3 (SPLIT). Endurance at Sea: around 17 days. Towing and Cargo Equipment. Winches and Anchors: two (Hydraulics). Clam Shell: 2m3. Backhoe: Komatsu 450. Drum Winches: Two (hydraulic). Ready to work. All documents in order. Reported to be in very good condition and with some spare parts for the Aquamaster included. It has hopper protection for loading stone.


Send Enquiry View Full Details


2,665 cbm Trailing Suction Hopper Dredger
Listing ID: 1868

DESCRIPTION:2,665 cbm Trailing Suction Hopper Dredger
DATE LAUNCHED:1981
LENGTH:87.8m (288ft)
BEAM:13.8m (45ft)
DRAFT:8m (26ft 2in)
LOCATION:China
BROKER:Geoff Fraser

Built:�Dec,�2006�rebuilt�from�container�vessel (Nov,1981�built�in�Germany).�


Send Enquiry View Full Details


4,600 cbm Trailing Suction Hopper Dredger
Listing ID: 1867

DESCRIPTION:4,600 cbm Trailing Suction Hopper Dredger
DATE LAUNCHED:2012
LENGTH:99.49m (326 ft)
BEAM:18m (59ft)
DRAFT:7.70m (25ft)
LOCATION:China
BROKER:Geoff Fraser

Built:�2012,Fujian�China. Class: CCS. Nav��Area:�coastal�(A1+A2). Hopper�Capacity:4641CBM. Dredging�Depth:30m. Dredging�Speed:3Knts.


Send Enquiry View Full Details


5700 cbm Trailing Suction Hopper Dredger
Listing ID: 1866

DESCRIPTION:5700 cbm Trailing Suction Hopper Dredger
DATE LAUNCHED:2014
LENGTH:105.59m (346ft 5in)
BEAM:19m (62ft 4in)
DRAFT:8m (26ft)
LOCATION:China
BROKER:Geoff Fraser
PRICE:POA

Class: CCS. Nav�Area:�coastal�(A1+A2). Hopper�Capacity:5723CBM. Dredging�Depth:34m. Full�loaded�navigation�speed:12Knts. Dredging�Speed: 3 Knts. M/E:�MAN�6L27/38�2190KW/800�r/min x 2 set.


Send Enquiry View Full Details


46.5m Bucket Dredger For Sale & Charter
Listing ID: 1299056

DESCRIPTION:46.5m Bucket Dredger For Sale & Charter
DATE LAUNCHED:1970
LENGTH:46.50m (152ft 6in)
BEAM:9.95m (32ft 7in)
DRAFT:2.1m (6ft 10in)
LOCATION:East Mediterranean
BROKER:John Kearns
PRICE:POA

Dredger suitable for dredging cohesive silt, sand, soft to stiff clay and acceptable for dredging loose silt, loose rocks, pre-treated rocks and very weak rocks. Its actual production rate varies from 100 to 200 m3/hr (1600 to 3200 m3/day based on 16 effective hours/day) depending on type of soil, dredge master experience and actual site and operation conditions.


Send Enquiry View Full Details


71m Trailing Suction Hopper Dredger - Price Reduced!
Listing ID: 587542

DESCRIPTION:71m Trailing Suction Hopper Dredger
DATE LAUNCHED:1981
LENGTH:71.00m
BEAM:12.00m
DRAFT:3.90m
LOCATION:South Europe
BROKER:John Kearns
PRICE:EUR 1,500,000

Built: 1981, SpainRebuilt � Refitted: 2001, 2009 and 2013. Flag: EU Flag, Class Society and Notation: Local Ship Insp. Class / Ocean Navig, Total power output: 1525HP, Main Engines: 1x CAT 3508, 1x DEUTZ SBA6M528, Main Propulsion System: Twin Screw. Bow Thruster: Volvo � 260HP. Speed: 9 knots loaded. Total cabins: 14 (9x1 man � 5x 2 men), Total berths: 19, 1x Mess room w WC, 1x kitchen, 1x laundry, 2x toilets with shower. Hopper Capacity: 850m3 hold to deck level, 1200m3 to top hatched coating, Time to fill/empty Hopper: 1 hour/1 hour, Dredging Depth: 30m. Dry docked in 2001 with total cost over 1 mio euros, Dry docked in the year 2009 with steel work repairs to the hull, New hydraulic pipes, new suction system (pipes), etc. Discharging Method: Excavator (CAT-345-BLME-2005), Fitted on rolling bridge or by shore. Pump out with range of 500 metres.


Send Enquiry View Full Details


NEW BUILD - 1200m3 Trailing Suction Split Hopper Dredger
Listing ID: 493482

DESCRIPTION:NEW BUILD - 1200m3 Trailing Suction Split Hopper Dredger
DATE LAUNCHED:BUILT TO ORDER
LENGTH:72.70m
BEAM:12.90m
DRAFT:4.50m
LOCATION:Spain
BROKER:John Kearns
PRICE:POA

We are pleased to offer this High Quality Split hopper Dredger built by Nodosa Shipyard in Spain. Class: GL; Class + 100 A5, RSA (50) Split hopper dredger + Hull + MC; Group III Class T. BUILT TO ORDER. The vessel is a self-propelled split hopper dredge. It has two independent hulls that open to drop its load of spoil and deposit it at the agreed place on the sea bottom. The hopper has a capacity of 1200 m3. This ship is equipped to perform various operations of maritime works, especially designed for dredging up by suction pump, although it also can dredge with a backhoe which is located on a rolling gantry hosted on top of the hopper. Of course, it can be used simply to transport dredging products... For all these reasons its versatility is more than demonstrated.


Send Enquiry View Full Details


NEW BUILD - Trailing Suction Split Hopper Dredger 1500m3
Listing ID: 520760

DESCRIPTION:NEW BUILD - 1500m3 Trailing Suction Split Hopper Dredger 1500m3
DATE LAUNCHED:BUILT TO ORDER
LENGTH:77.70m
BEAM:14.00m
DRAFT:4.80m
LOCATION:ex Shipyard, Spain
BROKER:John Kearns
PRICE:POA

BUILT TO ORDER by Nodosa Shipyard in Spain. The vessel is a self-propelled split hopper dredge. It has two independent hulls that open to drop its load of spoil and deposit it at the agreed place on the sea bottom. The hopper has a capacity of 1500 m3. This ship is equipped to perform various operations of maritime works, especially designed for dredging up by suction pump. Of course, it can be used simply to transport dredging products. For all these reasons its versatility is more than demonstrated.


Send Enquiry View Full Details


5,500m3 Trailing Suction Hopper Dredger
Listing ID: 1265828

DESCRIPTION:5,500m3 Trailing Suction Hopper Dredger
DATE LAUNCHED:2013
LENGTH:105m (344ft)
BEAM:19m (62ft)
DRAFT:4.8m (16ft)
LOCATION:China
BROKER:John Kearns
PRICE:USD 18,590,000

This 5,500 m3 Trailing Suction Hopper Dredger was built in 2013 in China. This vessel was constructed under CCS supervision and approved by CCS class. Dredging the great costal area and navigating in unrestricted area. The vessel is a self-propelled trailing suction hopper dredger with the functions of hopper dumping, rain bowing and pumping ashore.


Send Enquiry View Full Details


50.45m Backhoe Dredger For Sale
Listing ID: 1139901

DESCRIPTION:50.45m Backhoe Dredger For Sale
DATE LAUNCHED:1983
LENGTH:50.45m (165ft 6in)
BEAM:11.4m (37ft 4in)
DRAFT:2m (6ft 6in)
LOCATION:Europe
BROKER:John Kearns
PRICE:POA

Built 1983, NETHERLANDS. Flag:� BELGIUM. Class Society and Notation:� BV I 3/3. Vessel laid up but reported to be in warm condition. back Hoe. Deck crane. Walking spuds. Moon pool.


Send Enquiry View Full Details


5,500 m3 Trailing Suction Hopper Dredge
Listing ID: 616626

DESCRIPTION:5,500 m3 Trailing Suction Hopper Dredge
DATE LAUNCHED:2008
LENGTH:105.00m (344.48 ft)
BEAM:19.00m (62.33 ft)
DRAFT:8.00m (26.24 ft)
LOCATION:China
BROKER:John Kearns
PRICE:POA

The vessel is a self-propelled 105m Trailing Suction Hopper Dredge, built in China 2008 to CCS classification. The hopper has a capacity of 5500 m3 and the vessel can dredge to a maximum depth of 27m, with a loading time of approximately 45 minutes when operating duel drag heads. Discharging by Rainbow, bottom door dumping or via the pump ashore connection. Powered by twin 2795kW Wuxi Marine Diesel engines giving a free running speed of 12 knots and 7 knots when loaded. Accommodation for 30 crew.


Send Enquiry View Full Details


17m Cutter Suction Dredger
Listing ID: 431459

DESCRIPTION:17m Cutter Suction Dredger
DATE LAUNCHED:1992
LENGTH:17m
BEAM:3.60m
DRAFT:0.80m
LOCATION:South Europe
BROKER:John Kearns
PRICE:300,000 Euros

17m Cutter Suction Dredge For Sale in South Europe. Built: 1992, Netherlands. Vessel will be delivered with all certificates up to date. Dredging Depth: 6m. Total Weight: 30 tons. Diameter of suction pipe: 300mm. Diameter of discharge pipe: 250mm. Spuds: 8.25m length & 250mm. Ladder Length: 7.20m. Fuel Tanks: 5,000 litres. Fuel Consumption: 700 litres / 24 hours depend on length of discharge pipe. Engine for dredging-discharge: Cummins 19 KTA 500HP. Cutter: 40 HP. It is road transportable on special truck. Engine and pump reported to be in good condition. Theoretical performance at 300m with sand 0.3mm = 200 m3/H.


Send Enquiry View Full Details


IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

You are logged in:


Logout

facebook-button

TwitterButton

  Bookmark this page in your web browserwww.seaboats.net - DredgesCartNo Items in your Cart