Seaboats Main > Commercial Vessels > Offshore Industries > Crew Boats / Utility Vessels >

Damen Fast Crew Boat.



Listing ID:
2185

DESCRIPTION:Damen Fast Crew Boat
DATE LAUNCHED:2012
LENGTH:12.56m (41ft 2in)
BEAM:3.85m (12ft 7in)
LOCATION: South-Vietnam
BROKER:Richard Pierrepont
PRICE:USD 650,000

Send Enquiry


General Description:

Please scroll down to view more photos

 
Main Particulars
The Damen Stan Patrol 1204 is a modern high-speed Vessel of standard design.
The vessel is well suited for the following services (amongst others):
  • Safety patrol
  • Maritime safety
The vessel has a chined hull with deep-V bottom and spray rails.
The vessel is propelled with waterjets, which are driven by diesel engines.
The  Damen Stan Patrol 1204 is designed to ensure the following qualities for all aspects of the Vessel and for all the tasks it has to perform:
  • Efficient and accessible layout
  • Excellent performance
  • Cost effective to operate
  • Easy to maintain
  • Built to modern and high standards
  • Fitted with new and high standard commercial components.
Principal Dimensions
Length Overall ( including appendages): 12.56m
Length moulded: 11.47m
Beam over all (including appendages): 3.85m
Beam Moulded: 3.60m
Depth at side (at half length): 1.67m
Draught max. (approximately): 0.80m
 
Tank Capacities
Fuel Oil: 0.87m³ / 0.73 ton
Fresh Water: 0.08m³ / 0.08 ton
Waste Water: 0.03m³ / 0.03 ton
 
Other capacities
Crew: 2
(Industrial) personnel: 2
Gross tonnage / Net tonnage approx.: 15 / 5
Deck cargo aft (max.): 0.50 ton
Dead weight: The total maximum deadweight (fuel, persons, cargo, etc) 
should not exceed 2.50 ton.
 
Layout
The vessel is divided into the following watertight compartments:
  • Engine room
  • Accommodation
  • Fore peak
 
Propulsion and Speed
The vessel’s propulsion system consist of two marine diesel engines, each driving a waterjet. Full details are given in the Propulsion Selection Diagram (item 2014). The engines are indirectly seawater cooled and electrically started and can be removed via a large hatch.
 
Flag State Authorities
National Authorities
The vessel will be designed and built to comply with the regulations of ST. Vincent and the Grenadines.
 
Regulations
The vessel shall comply with the latest edition of the applicable rules of IMO (as far as applicable for this type and size of Vessel):
  • COLREGS – International Regulations for Preventing Collisions at Sea
  • Statement of main engine’s supplier is supplied, that engines comply with IMO emission requirements (EIAPP – Annex Vl).
Shipbuilding (Hull and outfitting)
Materials: Aluminium
Marine grade light alloy (aluminium) type.
  • Plating: EN-AW 5083 (equivalent to ISO Al Mg 4.5Mn)
  • Extrusions EN-AW 6082 (equivalent to ISO Al Mg Si 1) or  EN-AW 6060 (equivalent to ISO Al Mg Si 0.5)
Stainless Steel
Stainless steel type 316L or 321 is used unless mentioned otherwise
 
Welding
All welding will be performed in accordance with actual classification requirements.
 
On the outside of the hull, the bottom area and for all other areas where contact with water is expected e.g. water tank, sanitary rooms etc., the welding will be continuously.
 
Hull
General Description
The single chine hull has a deep V- bottom, spray rails, a trsnasom stern and a raked bow.
The hull is manufactured for aluminium plates, certified by a major classification society.
Longitudinal and transverse constructions, including engine beds, etc have suitable drainage holes to allow free draining of water to the bilge suctions.
 
Hull Scantlings
Hull scantlings are based on the requirements of a major Classification Society and / or by “Finite Element Method” calculations.
All the below mentioned thickness are indicative only and can be change based upon final construction analysis.
Side plating: 4mm
Bottom plating: 6mm
Deck plating: 4mm
Bulkheads: 4mm
Transom plating: 4mm
 
Sea Inlets
For each main engine a seawater inlet pipe is integrated in the hull construction.
Seawater for the auxiliary engine, toilet and / or the airconditioning system is taken from a separate inlet.
The ample size seawater inlets are designed for operation in the environmental conditions. 
 
Trim Tabs
Two trim stabs are fitted at the Vessel’s stern to ensure an optimum trim. Each trim tab is provided with a stainless steel tension rod, which can be manually turned for an optimum position of the trim tab.
 
Superstructure
General Description
Glass reinforced superstructure is resiliently mounted on the hull construction. The efficient layout offers an unobstructed view in all directions. The wheelhouse has an access door in the aft bulkhead and is provided with the following windows:
  • Two windows at the front.
  • Three windows at each side.
  • Two windows at the back.
  • Two windows in the access door.
In front of the wheelhouse a small crew accommodation in situated.
 
Hatches / Doors / Windows
General Description
All hatch covers are watertight by means of gaskets or rubber.
 
Forepeak Hatch
Make: Freeman (or equivalent)
Type: 20” (500mm)
 
Engine Removal Hatch
Aluminium flush hatches for access to the engine room and the removal of the main engines are fitted on the main deck.
 
Ventilation Hatch Accommodation
Make: Gebo (or equivalent)
Dimensions: 620 x 620mm
 
Inspection Hatches
Where necessary inspection hatches are provided for the tanks, voids, bilges, etc.
 
Closing Devices Air Ducts
The air duct and ventilator openings have the following closing devices:
  • The engine room ducts are provided with fire flaps.
  • The accommodation air inlet and / or outlet ducts are provided with fire flaps or closing hatches.
Watertight And Weather Tight Doors
All outside doors are fitted with stainless steel / synthetic hinges and toggles and can be secured in an open position.
 
Wheelhouse Door
The external Weathertight wheelhouse door is of a GRP construction.
Make: Winel (or equivalent)
Type: Musketeer GRP
 
Windows / Portholes / Blindages
Glass thickness: 12mm for the wheelhouse front windows
6mm for the wheelhouse side/aft windows
Make: Hora (or equivalent)
Type: AK+
 
Window Wipers
Make: Exalto
Number front wipers: 2
 
Fresh water window washing
The windows with window wiper are provided with a fresh water washing system.
 
Solar screens
Solar screens of the rolling type are fitted to all the wheelhouse windows.
 
Stairs / Ladders / Platforms
Stairs, ladders, railing, handrails and platforms are positioned to generally conform with the General Arrangement Plan.
 
Stairs / Ladders /Climbing Steps
Stairways
Stairs with anti-skid steps are fitted in the accommodation.
 
Masts
Navigation Masts
A GRP mast for navigation lights, flags and aerials is mounted on the top deck.
 
Propulsion Engine System
The main engines have integrated systems for lubrication oil, cooling water (inter-cooling) and fuel oil. The main engine are electrically started and are provided with turbo charging and charge air-cooling.
 
Reduction Gear System
Gearbox
Each engine is coupled to a gearbox with electrically operated from the dashboard. The gear box is provided with a built-in clutch for neutral and forward operation. The reverse function can be used for back flushing of the water jet.
 
Thrust System / Shafts
Drive Shafts
Make: Centa
Type: CF-A-140-GB
 
Waterjets
Waterjets, fitted at the bottom and transom, propel the vessel.
 
Steering Gear System
Powered Hydraulic Steering Gear
The steering pump is activated by the electric control system and is powered by a PTO of a drive shaft.
 
Bilge / Ballast / Internal FI-FI
Manually-Operated Bilge Pump Fore Peak
Make and Type: Whale Gusher 10
Capacity Approx.: 65l/min
 
Electrically Driven Bilge Pumps
Capacity approx: 200L/min (each)
Make: Jabsco (or equivalent)
Type: Rule 16A
 
Deck Hydrant and Fire Hose
Length fire hose approx: 6.0 meter
Number of hoses: 2
Coupling type: 1½” Storz
 
Water Separator
Make: Separ (or equivalent)
Type: SWK 2000
 
Emergency Stopping of the Fuel Oil Supply
In an emergency, the fuel oil supply to the engines can be stopped from outside the engine room.
 
Duplex Oil Filter
Each main engine is provided with a built-on duplex fuel oil filter.
 
Fresh (And Sea) Water Supply System
The fresh water tank is connected to a foot pump, which supplies fresh water to the tap(s).
 
Fresh Water Tank
A synthetic fresh water tank is fitted in the vessel.
 
Fresh Water Pump
Capacity: 16.0l/min at 2.8 bar
Make: Jabsco (or equivalent)
Type: Sensor Max 17
 
Sanitary Discharge System
Toilet
Make: RM (or equivalent)
Type: 69
 
Carbon Filter
Make: Vetus (or equivalent)
Type: NSF
 
Two air cooled units for the wheelhouse with a capacity of 13.500BTU each
Voltage: 110V
Make: Seamach
 
Alternators (24V)
Capacity approx.: 75 A (portside)
75 A (starboard)
 
Battery Sets (24V)
 
Battery Charger
Voltage: 24V
Capacity: 1800W
Make: Mastervolt (or equivalent)
Type: 24/75
 
Generators:
Voltage: 230V
Phase(s): 1
Frequency: 50Hz
Capacity: 4.0kW-4.0kVA
Make: Cummins Onan
Type: 4 MDKBH
 
Anchor with Line
Anchor Type: Pool N
Anchor weight: 20 kg
Chain length: 15m
Chain diameter: 10mm (short-link)
Length nylon line: 55m
Diameter nylon line: 18mm
Number installed: 1
 
Mooring Lines
Mooring lines are provided with the vessel.
Number: 3
Length: 16m
Diameter: 18mm
 
Lifebuoys
Two lifebuoys are stored in frames and fitted on the vessel.
 
Lifejackets
Make: Marine Assist (or equivalent)
Type: Shipshape ll
 
Life Raft
Number: 2
Capacity: 8 persons each
Make: RFD (or equivalent)
 
Parachutes
Number: 6
Colour: Red
 
First Aid Kit
Number: 1
 
Fire Blanket
Number: 1
 
Fixed Internal Fi-Fi System
The engine room is provided with an aerosol fire-fighting system.
Make: Marinex (or equivalent)
Type: Stat-X
 
Joinery wheelhouse
Floor: GRP gel coat
Lining: GRP gel coat
Ceiling: GRP gel coat
 
Joinery Accommodation
Floor: GRP gel coat
Lining: GRP gel coat
Ceiling: GRP gel coat
 
Console and Helmsman Seat
Make: Norsap (or equivalent)
Type: 800
 
Navigator Seat
Make: Norsap (or equivalent)
Type: 800
 
Bunks
Dimensions: 2000 x 650mm
Material: Polyether
 
Pantry
  • Stainless steel sink with cold water tap
  • Cupboard underneath the sink
  • One hotplate (230V via shore supply)
  • One kettle of approx. 1.5L
  • Refrigerator, 50L, (24)
Navigation Lighting
  • Two (2) side lights, portside is red and starboard side is green
  • One (1) stern light, white
  • One (1) anchor light, white
Make and type: Den Haan (or equivalent)
Type: DHR 35
 
Search Light System
Voltage: 24V
Capacity: 250W
Make: Den Haan (or equivalent)
Type: DHR 220
 
Horn
Make: Ongaro (or equivalent)
Type: Marine duel trumpet
 
Radar
Display: 12” colour TFT
Radar scanner: 24” digital dome, 4kW
GPS: SDGPS Raystar 125
Echo Sounder: DSM300
Chart: Navionics Silver
Voltage: 24V
Make: Raymarine (or equivalent)
Type radar: C120
 
Chart Plotter
A chart plotter is integrated with a radar system.
 
GPS Navigator
A GPS system is installed and is displayed on the integrated navigation system.
 
Automatic Identification System
Make: Raymarine
Type: AIS 500
 
Compass
Magnetic Compass
Make: Ritchie (or equivalent)
Type: Navigator HB-71
 
Echo Sounder
Digital Echo Sounder
An echo sounder is part of the chart plotter.
 
VHF Radio Telephone / Loudhailer
A combined VHF radio telephone with all international channels and loudhailer is installed.
DSC: Class D
Number: 1
Make: ICOM
Type: IC-M505
 
Radio / DVD
The vessel is equipped with a radio / DVD player with USB connection.
 
 
 
 
 

Download as PDF



IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

You are logged in:


Logout

facebook-button

TwitterButton

  Bookmark this page in your web browserwww.seaboats.net - HomeCartNo Items in your Cart