Seaboats Main > Commercial Vessels > Tugs >

32.40m Voith Tug - Price Slashed. It must be Sold!



Listing ID:
2143

DESCRIPTION:32.40m Voith Tug
DATE LAUNCHED:1970
LENGTH:32.40m (106ft 3in)
BEAM:9.49m (31ft 1in)
LOCATION:New Plymouth
BROKER:Geoff Fraser
PRICE:Only 100.000 USD

Send Enquiry


General Description:

Please scroll down to view more photos

 
The “Kupe” is a 32.4m flush deck, all steel, Voith Schneider harbour tug with a forward wheel house built in 1970 at Whangarei Shipbuilding, Whangarei NZ.  Kupe has a two deck superstructure with a flying bridge above the wheelhouse. The vessel is divided into 6 compartments.  The forepeak/anchor locker, Forward crew accommodation, Engine Room, Aft crew accommodation, Aft lazarette, Aft peak tank.
 
The main deck accommodation comprises the officer’s accommodation, washrooms, galley, mess room and Engine control room.  The upper deck contains the wheelhouse with a flying bridge above.  The flying bridge contains a full set of duplicate controls.   
 
General Specifications
Construction: Steel
LOA: 32.40m
Beam: 4.90m
Depth: 4.9m
Gross Tonnage: 304.03
Official No: 3323397
Class: Lloyds Register 100A1 Tug LMC
LR Number: 7107194
MSA No: 101809
Call Sign: ZMKO
Main Engine: 2 x Ruston Paxman/English Electric 6 CSRKM Mk3
Power: 1350hp (1007kw) each
Drive: 2 x Voith Schneider 5 blade 28G II 185 units
Auxiliary Engine: 2 x Caterpillar D343 128Kw alternators
Fuel Capacity: 111 tonnes in 7 tanks
Fresh Water Cap: 49 Tonnes in 5 tanks (max capacity if all tanks used)
Bollard Pull: 28 Tonnes in direct mode
Speed: 12 kts
 
Wheelhouse 
The wheelhouse is accessed via a companionway up from the main deck and from doors on both sides aft. The wheelhouse is large and well laid out with good visibility forward and to the sides. The view aft to the towing winch is partially obscured by the large funnel casing.  A central engine control station has duplicate Voith controls port and starboard. This arrangement is replicated on the flying bridge with interconnected mechanical controls.
 
The Kupe is equipped with a selection of electronic navigation and communication equipment as required for operation as a harbour tug.
 
Electronic Equipment
Compass: Magnetic Compass on flybridge (periscope removed)i
Radar: Furuno Radar
GPS: Furuno GP31
SSB: Kodan
PA: TOA PA System
Auto Pilot: Comnav
Other equipment: Clock, Barometer
 
Galley, Mess room and Crew Accommodation
Located on the main deck, the accommodation consists of engine control room, wash room, officer’s shower/toilet, galley, mess room and the two single cabins for the Master and Engineer. A companionway forward gives access down to a 4 berth cabin to port and a single cabin to starboard (there is access through to the forepeak tank and chain locker inspection plates from the single cabin).   A companionway aft gives access down to 1 x 4man cabin stbd and storeroom.  There is access from the port aft cabin through into the aft lazarette.  The lazarette contains the emergency fire pump. There are inspection plates in the lazarette to the aft peak tank and aft ballast tanks port and starboard.
 
The galley is equipped with a four ring electric stove, stainless steel bench, fridges, freezer and microwave oven.
 
Deck Equipment
The large clear working deck area is equipped with Rapp Hydema Towing winch fitted with 119t BS winch line.  This and the towing eye were fitted new in 2002.  The fendering around the stern of the vessel was upgraded with large rubber fenders at this time.
 
In 2011 a purpose built 3T tugger winch was fitted as well as stern roller and second hand 1T Hiab.
A tow hook is fitted to work in conjunction with the tugger for quick release of gear on deck but limited to 3T capacity.
 
Related Deck Equipment
Anchor Winch: An Thom Reid anchor winch with 2 chain gypsies and two mooring drums is located on the focsle.  Each anchor has 11 shackles of 1” stud link chain.
 
Engine Room and Machinery
The Kupe is powered by two Ruston Paxman/English Electric 6CSRKM Mk3 turbo charged diesel engines developing 1350hp at 900 rpm.  These engines have logged 30,414 hours since new.  The engines are maintained to Lloyds Register requirements.  The starboard engine has a power take-off to the main fire pump which is now decommissioned. Auxiliary power is provided by 2 x Caterpillar D343 200hp turbocharged diesel engines driving 128Kw Macfarlane Markon alternators.  The engine room is clean and tidy and the machinery maintained in good condition.  The bilges appeared to be clean and dry. 
 
Survey Status
The Kupe is in Class +100A1 TUG LMC with Lloyds Register. The Kupe requires a crew of three for harbour operations.
 
 
 
 

Download as PDF



IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

You are logged in:


Logout

facebook-button

TwitterButton

  Bookmark this page in your web browserwww.seaboats.net - HomeCartNo Items in your Cart